2. Computers & electronics
  3. Audio & home theatre
  4. Headphones
  5. Headphone/headset accessories
  6. Ops-Core
  7. AMP Camo Skin Set

Ops-Core AMP Camo Skin Set Operating instructions

  • Hello! I am an AI chatbot trained to assist you with the Ops-Core AMP Camo Skin Set Operating instructions. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
AMP CAMO SKINS
FOR OPS-CORE AMP
™
COMMUNICATION HEADSET
This product is covered by one or more patents.
For more information visit www.gentexcorp.com/patents
1000751
Copyright © 2018 Gentex Corporation. Ops-Core is a registered trademark of Gentex Corporation or its afliates.
COLOR
MultiCam
®
1000660-02
MultiCam
®
Arid
1000660-04
MultiCam
®
Alpine
1000660-06
MultiCam
®
Tropic
1000660-05
MultiCam
®
Black
1000660-03
APPLY THE SKINS TO THE EARCUPS
Remove the adhesive backing and apply the skins to the proper locations on the earcups as shwon below.
APPLY THE SKINS TO THE RAIL ARMS
If you have a Rail Arm Kit (sold separately), apply the skins to the Rail Arms as shown below.
Left Eracup Right Eracup
INSTALLATION
CLEAN EARCUP SURFACE BEFORE APPLYING SKINS
Remove the earcups from the headband or rail arms. Use mild soap and water or isopropyl alcohol to clean the
surface of both earcups. Do not use harsh chemicals. Remove all dirt and grease before applying skins.
REMOVING AND REUSING SKINS
To remove and reuse skins, simply peel off slowly and reattach backing for future use.
/