Quick Reference
Basic Setup & Operations
D645
Step 4 - Plug in the Player
Connect the player’s power
cord to a standard wall outlet.
Step 1 - Insert Remote Control Batteries
1 Remove the battery cover from the back of the
remote control.
2 Insert the supplied batteries, paying attention to
the correct polarities (+ and -).
3 Replace the cover.
Step 2 - Connect Audio
Connect the supplied audio cable (red and white)
from the Audio jacks on the rear of the player to the
Audio Inputs on your television.
Step 3 - Connect Video
Connect the supplied video cable (yellow) from the
Video jack on the rear of the player to the Video Input
on your television.
Welcome
Congratulations on your purchase of this
GoVideo Progressive Scan DVD/CD player. This
Quick Reference Guide will help you set up and
start using the player as quickly as possible.
Before you begin, please check to make sure
the following accessories are included with your
DVD player:
• Remote Control
• AAA Batteries (2)
• Audio/Video Cable
• User’s Guide
• Quick Reference Guide
• Product Registration Card
Y
Pb Pr
S- VID EO
CO AXI AL
VI DEO
VI DEO O UT
AUDIO IN VIDEO IN
DVD Player
TV
Yellow
Y
Pb Pr
S- VID EO
CO AXI AL
RL
VI DEO
AU DIO O UT VI DEO O UT
AUDIO IN VIDEO IN
DVD Player
TV
White Red
Y
Pb Pr
S- VID EO
CO AXI AL
RL
VI DEO
AU DIO O UT VI DEO O UT
AUDIO IN VIDEO IN
DVD Player
TV
Yellow
Y
Pb Pr
S- VID EO
CO AXI AL
RL
VI DEO
AU DIO O UT VI DEO O UT
AUDIO IN VIDEO IN
DVD Player
TV
White Red
Step 5 - Turn on the Player
Press the
POWER
button on the front panel to turn on
the player.
POWER
Step 1 - Open Disc Tray
Press the
OPEN/CLOSE
button to open the disc tray.
Step 2 - Insert Disc
Place the disc in the center
of the tray with the label side
facing up.
Step 3 - Close Disc Tray
Press the
OPEN/CLOSE
button again to close the disc
tray and load the disc.
Step 4 - Play Disc
The DVD player starts playback or opens the DVD
disc menu automatically.
• If playback does not start automatically, press the
PLAY
button to start playback.
Step 5 - Navigating Disc Menus
Press
DISC MENU
to display the disc menu for your
DVD.
•
Press
or use the number button(s) to
select the desired chapter/title.
• To select a chapter/title, input the number; e.g.,
press “1” for chapter 1, “1-0” for chapter 10, etc.
•
Press
PLAY
to start playback of the selected
item.
• If you are not sure how to select the Video input
on your TV, check your TV user’s guide or look for
a button labeled INPUT, VIDEO, LINE, AUX, or
TV/VIDEO on your TV remote control.
©2004 GoVideo. All rights reserved.
Step 6- Select Video Input on TV
Set your TV to its appropriate Video input to view the player.
• The GoVideo wallpaper will appear:
Basic DVD Playback
7
0
8
10+
9
4 5 6
POWER
MUTE
CLEAR
DISPLAY
PROGRAM
SUBTITLE
ANGLE
AUDIO
TITLE
DISC MENU
REW
SEARCH
REPEAT
SETUP
RETURN
A-B
PAUSEPLAYSTOP
ZOOM
VOL
–
+
PBC
ENTER
STEP
SLOWFREEZE
FF PREV NEXT
1 2 3
P. SCAN
OPEN
CLOSE
1, 3
4
5
For detailed
instructions
and descriptions
of features, please
consult the
User’s Guide
-
1
-
2
