Furious FPV Radiance DSHOT User manual

Please contact us if you need further assistance:

Tech support: tech@furiousfpv.com

Sales support: sales@furiousfpv.com

Website: http://furiousfpv.com/

RADIANCE DSHOT VERSION

Flight Controller

USER MANUAL VERSION 1.1

1

Contents

Change Log ........................................................................................................ 2

Introduction ....................................................................................................... 3

WHAT’S NEW RADIANCE DSHOT VERSION? ....................................................... 3

Features ............................................................................................................. 3

Connections ....................................................................................................... 5

Connect with Receiver .................................................................................... 5

 Using SPD15 Receiver ............................................................................ 5

 Using LR1000D Receiver ........................................................................ 6

 Using XSR FrSky Receiver ....................................................................... 7

 Using Spektrum Satellite Receiver ......................................................... 7

Connect with Video Transmitter ..................................................................... 8

 Using Tramp HV ..................................................................................... 8

 Using TBS Unify Pro ............................................................................. 10

 Using FX FX799T .................................................................................. 12

Connect with stack Mnova and Runcam ...................................................... 14

Connect with other devices .......................................................................... 15

Connect with ESC 4 in 1 ................................................................................ 16

 Using Aikon SEFM 30A ......................................................................... 16

 Using Cicada 35x4 35A ......................................................................... 17

 Using T-Motor F 35A 4IN1-4S .............................................................. 18

Basic setup ....................................................................................................... 19

Tips .................................................................................................................. 20

How to configure your Spektrum RX with your Flight Controller .................. 20

How to turn on bind mode ........................................................................... 22

Guideline configuration OSD with TRUE VISION CONFIGURATOR V1.0 ......... 23

How to open Piggy OSD menu by Transmitter .............................................. 24

2

Change Log

v1.1

 Add guideline configuration OSD with TRUE VISION CONFIGURATOR V1.0

 OSD Menu Index

3

Introduction

The Furious FPV Radiance FC (Flight Controller) provides a blaze of feature packed brilliance that

equates to the perfect fit for models utilizing their own PDB (power distribution board).

Functionality is the key, but innovation is our specialty. The Radiance FC stacks with 4 in 1 ESC’s

for perfect CG, allowing optimized acro flight. When utilising your own PDB, weight and cost are

minimised.

High performance and user friendly, the Radiance FC features cutting edge F3 chip (MPU6000)

processing power, a built in BEC, integrated LC filter, iLap transponder, and a current sensor

input, just to name a few. With this feature packed insanity, the Radiance shadows all other

FC's, providing everything that's needed in one perfect package.

Step into the light with unworldly levels of capability & functionality, all at ultra-budget friendly

pricing. Simply put, this is the way we do it at Furious FPV.

WHAT’S NEW RADIANCE DSHOT VERSION?

 Remove PPM pin and add TX2 pin

 Ready support ESC Dshot protocol

 New component for BEC better

 New red color for PCB

Features

 Latest Generation F3 Processor Chip

 High Performance, User Friendly F3 MPU6000 Chip

 Integrated LC Filter for Perfect Clarity

 Designed for Acro Precision via CG Perfection

 Heavy Duty 1A BEC @ 5V Output and 0.8A BEC @12V Output

 Included Spektrum Satellite Port

 2S-5S Lipo Ready

 Ready DSHOT protocol

 Inrush Voltage Protection Input by Transient Voltage Suppressor

 Gold Plated Pads for the Very Best Connectivity

 Weight: 5gr

4

Board Layout

Dimensions

5

Connections

*WARNING: Radiance DShot Version can support up to 5s Lipo battery but make sure other

devices also support it.

Connect with Receiver:

 Using SPD15 Receiver:

You can buy SPD15 Receiver right here: https://goo.gl/FTnrpR

6

 Using LR1000D Receiver:

You can buy LR1000D Receiver right here: https://goo.gl/4Cr0Hl

* NOTE: If you use LR1000D Receiver please go to CLI and type the following commands:

set sbus_inversion = OFF

save

7

 Using XSR FrSky Receiver:

 Using Spektrum Satellite Receiver:

8

Connect with Video Transmitter:

 Using Tramp HV:

 With Piggy V2 OSD

9

 With Only Camera

10

 Using TBS Unify Pro:

 With Piggy V2 OSD

11

 With Only Camera

12

 Using FX FX799T:

 With Piggy V2 OSD

13

 With Only Camera

14

Connect with stack Mnova and Runcam:

You can buy Mnova right here: https://goo.gl/JyQnds

15

Connect with other devices:

You can buy LED STRIP right here: https://goo.gl/TXwSwI

16

Connect with ESC 4 in 1:

 Using Aikon SEFM 30A:

You can buy ESC Aikon SEFM 30 4 in 1 right here: https://goo.gl/IOYBEr

17

 Using Cicada 35x4 35A:

You can buy ESC Sunrise Cicada 35x4 35A right here: https://goo.gl/s08OaI

18

 Using T-Motor F 35A 4IN1-4S:

You can buy ESC F 35A 4in1-4S right hexre: https://goo.gl/QyM3eh

19

Basic setup

Please, follow carefully these next steps, and always remove your propellers when you’re

configuring your quad

STEP 1: Connect Radiance DS with the computer via USB cable and then open BetaFlight

STEP 2: Configure Ports.

(1) Turn on MSP of UART 1 to use OSD.

(2) Turn on Serial Rx of UART 2 to use Receiver Mode

(3) Select SmartPort of UART 3 to use S.Port of Receiver.

* NOTE: Please make sure that all the connections are correct.

STEP 3: Go to Configuration tab and choose ESC/Motor protocol in ESC/Motor Features

STEP 4: Select Serial- based receiver in Receiver Mode

Page is loading ...

Furious FPV Radiance DSHOT User manual

This manual is also suitable for

Furious FPV Radiance DSHOT User manual

Related papers

Other documents