2. ITC
  3. 69343

ITC 69343 Installation guide

  • Hello! I've reviewed the installation instructions for the ITC Radiance 69343 Overhead Light. This document covers the necessary tools, safety precautions, mounting methods and wiring of the light. I'm ready to answer any questions you have regarding the usage and installation process.
  • What is the operating voltage for this light?
    Is this light suitable for wet locations?
    What are the mounting methods?
3030 Corporate Grove Dr.
Hudsonville, MI 49426
Phone: 616.396.1355
itc-us.com
1. Determine the installation location and drill a hole.
Black (-)
12V DC (+)
Overhead
Light
White (-)
Black (+)
Incoming
12V DC
Power
Safety Instructions
• Disconnect power before installing, adding or changing any component.
• To avoid a hazard to children, account for all parts and destroy all packing materials.
• Light is rated for interior installation only, do not install in wet locations.
• Operating Voltage: 10 - 14V DC
3. Install and test the light.
2. Using the wiring diagram below to wire the light to
the units power.
Mounting Method Cut-
out
Leaf Spring/Spring 2-⅝”
Screw 2-½”
PARTS/TOOLS NEEDED:
Radiance Overhead Light Butt Splice Connectors
(not provided) Power Drill w/ Hole Saw Bit
INSTALLATION INSTRUCTIONS
3.5” Radiance™ Light
Part#: 69343
For warranty information please visit www.itc-us.com/warranty-return-policy
DOC #: 710-00077 • Rev A • 06/06/18
Page 1 of 1
/