Assembly Instructions
STEP 2
Attach Stretcher (E) to unit with Bolts.
Place Cushion (F) onto seat.
Use the tie-downs on Cushion (F)
to attach to chair.
F
E
STEP 1
Attach Arm (C) and Seat (B) to
Back Panel (A) with Short Bolt, Bolts,
Flat Washers, Nuts and Cap Nuts.
Attach Arm (D) to unit with
Short Bolt, Bolts, Flat Washers,
Nuts and Cap Nuts.
A
C
D
B
Please keep the Key Wrench as you may need to retighten the Bolts in the future.
Short Bolt
Bolt
Flat Washer
Nut
Cap Nut
Head Cap Bolt
IMPORTANT
*Do not tighten up all the Bolts until each part is properly assembled.
*Use a soft cloth between these parts and floor.