Assembly Instructions 2/2
IMPORTANT
* Please keep Key Wrench in a safe place as you may need to tighten up the Nuts in the future.
* Use a soft cloth between these parts and the floor.
* Do not use power tools to assembly and do not tightening the bolts and nuts.
* Do not tighten up all the bolts and nuts until each part is properly assembled.
STEP 2
Attach Stretcher (E) to unit with Bolts.
Place Cushion (F) onto seat.
Use the tie-downs on Cushion (F)
to attach to chair.
F
E
STEP 1
Attach Arm (C) and Seat (B) to
Back Panel (A) with Short Bolt, Bolts,
Flat Washers, Nuts and Cap Nuts.
Attach Arm (D) to unit with
Short Bolt, Bolts, Flat Washers,
Nuts and Cap Nuts.
A
C
D
B
Short Bolt
Bolt
Flat Washer
Nut
Cap Nut
Head Cap Bolt