Star Trac 8CT-10 Assembly Manual

Brand: Star Trac

Model: 8CT-10

Type: Assembly Manual

This manual is also suitable for

ASSEMBLY

MANUAL

8-CT

Core Health & Fitness

Star Trac

Page 1

9-6140 8-CT Cross Trainer

Overall Weight Width Length Height Max User Weight

420 lbs (190 kg) 29 in (73.6 cm) 79 in (200.6 cm) 50 in (127 cm) 0-350 lbs (0-159 kg)

All products may be covered by US and Foreign Patents and Patents Pending.

PRODUCT SPOTLIGHT

Page 2

SKU Description

740-7919-XX ASSY, HANDLEBAR, LEFT, E-CT

740-7920-XX ASSY, HANDLEBAR, RIGHT, E-CT

740-4589 Screw, M8x1.25, 20mm, HHC, SS

740-4591 Washer, Lock, EXT, M8, Ø8.4xØ15x0.8mm, SS

740-7855 ASSY, HANDLEBAR, RIGHT, E-CT

740-7856 ASSY, HANDLEBAR, RIGHT, E-CT

740-7855 COVER, UPPER BODY JOINT, FRONT, LEFT, E-CT

740-7856 COVER, UPPER BODY JOINT, BACK LEFT, E-CT

740-7853 COVER, UPPER BODY JOINT, FRONT RIGHT, E-CT

740-7854 COVER, UPPER BODY JOINT, BACK RIGHT, E-CT

740-7922 Screw, M2.9, 9.5mm, PHT, PH, SS

721-1428-XX TRIM RING, NECK, VERSA

721-1487-XX ASSY, NECK, CT

701-0020-XX ASSY, CENTER CONSOLE, BIKES & CT

730-0889 SCREW,M8X1.25,20mm,SHCS,HK,SS,A-2,FT

718-5693 WASHER, M8, COUNTERBORE, COSMETIC

740-4593 Screw, Set, M8x1.25, 40MM, CPS, HK, AS, ECB

020-7434-XX PLASTIC, DISPLAY, REAR, BCS

110-3402 SCREW, #8-18, 3/4”, HI-LOW, PHT, PH, CS, BO

120-3307 WASHER, M4, 4.3mm I.D. X 12mm O.D., ISO 7089

020-7522 Grommet, Display, GD3, CT

701-0317-XX

PLASTIC, DISPLAY, FRONT, LCD, ST, BCS, W/ IN-

SERTS

Required Tools:

• 13mm Socket

• Ratchet Wrench

• #2 Phillips Screwdriver

• 6mm Allen Key

• 4mm Allen Key

Page 3

1. Use a 13mm socket to secure the left side upper

handrail (740-79119-XX) to the lower left handrail

using four (4) pieces each of the M8 x 20mm hex

head cap screw (740-4589) and M8 toothed lock

washer (740-7856).

2. Repeat Step 1 for the right side upper handrail

(740-7920-XX).

3. Use a #2 phillips screwdriver to secure the left

front (740-7855) and back (740-7856) joint covers

to the unit using four (4) pieces of the M2 x

9.5mm pan head screw (740-7922).

4. Repeat Step 3 for the right side front (740-7853)

and back (740-7854) joint covers.

5. Route the cable bundle up through the beauty

ring (721-1428-XX) and the mast assembly (721-

1487-XX, 701-0020-XX), then use a secure the

mast to the frame using four (4) pieces each of

the M8 x 20mm socket head cap screw (730-

0889) and M8 cosmetic counter-bore washer

(718-5693).

Page 4

6. Use a 4mm allen key to lock the mast assembly to

the frame using one (1) piece of the M8 x 40mm

set screw (740-4593).

7. Use a #2 phillips screwdriver to secure the back

console shroud to the console weldment using

eight (8) pieces of the #8-18 x 3/4” screw (110-

3402) and M4 washer (120-3307).

8. Install the console grommet onto the mast (020-

7522).

9. Refer to the documentation contained inside the

console box in order to connect the console to

the unit.

NOTE: Depending on which console was purchased,

the install instructions could di er.

10. Use a #2 phillips screwdriver to secure the

console front (701-0317-XX) to the back shroud

using eight (6) pieces of the #8-18 x 3/4” screw.

Page 5

The Support website provides a wealth of resources to help you get the best experience from your

unit. It is important to check the website periodically for Owner’s Manual and Installation Instruc-

tions, Service Bulletins, and other information. The resources include:

• Contact number and email for Technical Support

Go to https://support.corehandf.com/ for support information and information on all

Startrac products.

• Warranty information is available at: https://corehandf.com/warranty

•

Updated Owner’s Manual, Assembly Manual, Service Manual, Service Bulletins,

Instructional Videos, and other information are at: https://support.corehandf.com/8CT

Contact Information

CORE HEALTH & FITNESS

4400 NE 77th Avenue, Suite 300

Vancouver, WA 98662

Telephone: (888) 678-2476

http://www.corehandf.com

Customer Support

Contact your local distributor, or Core Health &

Fitness directly at: 1-800-503-1221

support@corehandf.com

Please supply the serial number of your unit and the date of purchase when you call. Use the space

in the boxes below to write down this information.

Serial Number

Date of Purchase

You may download the latest version of the Installation Guide, as well as view instructional videos,

by visiting the support website at:

https://support.corehandf.com/8CT

SUPPORT AND SERVICE

Star Trac 8CT-10 Assembly Manual

Brand: Star Trac

Model: 8CT-10

Type: Assembly Manual

This manual is also suitable for

Download PDF

report

Star Trac 8CT-10 Assembly Manual

This manual is also suitable for

Star Trac 8CT-10 Assembly Manual

Related papers

Other documents