Core Health & Fitness 8CT-15 Assembly Manual

Type
Assembly Manual

This manual is also suitable for

ASSEMBLY
MANUAL
8-CT
Core Health & Fitness
Star Trac
Page 1
9-6140 8-CT Cross Trainer
Overall Weight Width Length Height Max User Weight
420 lbs (190 kg) 29 in (73.6 cm) 79 in (200.6 cm) 50 in (127 cm) 0-350 lbs (0-159 kg)
All products may be covered by US and Foreign Patents and Patents Pending.
PRODUCT SPOTLIGHT
Page 2
SKU Description
740-7919-XX ASSY, HANDLEBAR, LEFT, E-CT
740-7920-XX ASSY, HANDLEBAR, RIGHT, E-CT
740-4589 Screw, M8x1.25, 20mm, HHC, SS
740-4591 Washer, Lock, EXT, M8, Ø8.4xØ15x0.8mm, SS
740-7855 ASSY, HANDLEBAR, RIGHT, E-CT
740-7856 ASSY, HANDLEBAR, RIGHT, E-CT
740-7855 COVER, UPPER BODY JOINT, FRONT, LEFT, E-CT
740-7856 COVER, UPPER BODY JOINT, BACK LEFT, E-CT
740-7853 COVER, UPPER BODY JOINT, FRONT RIGHT, E-CT
740-7854 COVER, UPPER BODY JOINT, BACK RIGHT, E-CT
740-7922 Screw, M2.9, 9.5mm, PHT, PH, SS
721-1428-XX TRIM RING, NECK, VERSA
721-1487-XX ASSY, NECK, CT
701-0020-XX ASSY, CENTER CONSOLE, BIKES & CT
730-0889 SCREW,M8X1.25,20mm,SHCS,HK,SS,A-2,FT
718-5693 WASHER, M8, COUNTERBORE, COSMETIC
740-4593 Screw, Set, M8x1.25, 40MM, CPS, HK, AS, ECB
020-7434-XX PLASTIC, DISPLAY, REAR, BCS
110-3402 SCREW, #8-18, 3/4”, HI-LOW, PHT, PH, CS, BO
120-3307 WASHER, M4, 4.3mm I.D. X 12mm O.D., ISO 7089
020-7522 Grommet, Display, GD3, CT
701-0317-XX
PLASTIC, DISPLAY, FRONT, LCD, ST, BCS, W/ IN-
SERTS
Required Tools:
• 13mm Socket
• Ratchet Wrench
#2 Phillips Screwdriver
6mm Allen Key
4mm Allen Key
Page 3
1. Use a 13mm socket to secure the left side upper
handrail (740-79119-XX) to the lower left handrail
using four (4) pieces each of the M8 x 20mm hex
head cap screw (740-4589) and M8 toothed lock
washer (740-7856).
2. Repeat Step 1 for the right side upper handrail
(740-7920-XX).
3. Use a #2 phillips screwdriver to secure the left
front (740-7855) and back (740-7856) joint covers
to the unit using four (4) pieces of the M2 x
9.5mm pan head screw (740-7922).
4. Repeat Step 3 for the right side front (740-7853)
and back (740-7854) joint covers.
5. Route the cable bundle up through the beauty
ring (721-1428-XX) and the mast assembly (721-
1487-XX, 701-0020-XX), then use a secure the
mast to the frame using four (4) pieces each of
the M8 x 20mm socket head cap screw (730-
0889) and M8 cosmetic counter-bore washer
(718-5693).
Page 4
6. Use a 4mm allen key to lock the mast assembly to
the frame using one (1) piece of the M8 x 40mm
set screw (740-4593).
7. Use a #2 phillips screwdriver to secure the back
console shroud to the console weldment using
eight (8) pieces of the #8-18 x 3/4” screw (110-
3402) and M4 washer (120-3307).
8. Install the console grommet onto the mast (020-
7522).
9. Refer to the documentation contained inside the
console box in order to connect the console to
the unit.
NOTE: Depending on which console was purchased,
the install instructions could di er.
10. Use a #2 phillips screwdriver to secure the
console front (701-0317-XX) to the back shroud
using eight (6) pieces of the #8-18 x 3/4” screw.
Page 5
The Support website provides a wealth of resources to help you get the best experience from your
unit. It is important to check the website periodically for Owners Manual and Installation Instruc-
tions, Service Bulletins, and other information. The resources include:
Contact number and email for Technical Support
Go to https://support.corehandf.com/ for support information and information on all
Startrac products.
Warranty information is available at: https://corehandf.com/warranty
Updated Owners Manual, Assembly Manual, Service Manual, Service Bulletins,
Instructional Videos, and other information are at: https://support.corehandf.com/8CT
Contact Information
CORE HEALTH & FITNESS
4400 NE 77th Avenue, Suite 300
Vancouver, WA 98662
Telephone: (888) 678-2476
http://www.corehandf.com
Customer Support
Contact your local distributor, or Core Health &
Fitness directly at: 1-800-503-1221
support@corehandf.com
Please supply the serial number of your unit and the date of purchase when you call. Use the space
in the boxes below to write down this information.
Serial Number
Date of Purchase
You may download the latest version of the Installation Guide, as well as view instructional videos,
by visiting the support website at:
https://support.corehandf.com/8CT
SUPPORT AND SERVICE
© 2019 CORE HEALTH & FITNESS, LLC PART NUMBER 620-8384, REV B
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7

Core Health & Fitness 8CT-15 Assembly Manual

Type
Assembly Manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI