2. JADMAR
  3. JSLC-SOL
JSLC-SOL

JADMAR JSLC-SOL User manual

  • Hello! I've analyzed the provided installation instructions for the JADEMAR JSLC-SOL series solar sign lights. This document outlines the installation steps and specifications for various models, including JSCL-SOL-12-5W, JSCL-SOL-24-10W, JSCL-SOL-36-15W and JSCL-SOL-48-20W. It also details features like the light's operating modes, material composition, and electrical characteristics and features. I'm ready to answer any questions you have about this product.
  • What is the operating temperature range?
    What is the charging temperature range?
    What is the light's color temperature?
    What is the light's beam angle?
    How does the light operate?
WWW.JADEMAR.COM
Miami, FL USA - info@jademar.com
T: 305.640.0465 - F: 305.640.0468 Revised 05/2022
Page 1 of 1
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS - BOX MOUNTING
Model Number
JSLC-SOL-5W-5V-40K
JSLC-SOL-5W-5V-50K
JSLC-SOL-10W-5V-40K
JSLC-SOL-10W-5V-50K
JSLC-SOL-15W-5V-40K
JSLC-SOL-15W-5V-50K
JSLC-SOL-20W-5V-40K
JSLC-SOL-20W-5V-50K
LED Power 5W 10W 15W 20W
Solar Panel Power 5.5V 4.5W 5.5V 9W 5.5V 13W 5.5V 17W
Battery Li-Ion 3.7V
8800mAH
Li-Ion 3.7V
17600mAH
Li-Ion 3.7V
26400mAH
Li-Ion 3.7V
8800mAH
Product Size 11.81" x 2.52" x 4.59" 23.62" x 2.52" x 4.59" 32.68" x 2.52" x 4.59" 41.38" x 2.52" x 4.59"
Charging Time
LED Color
CRI
LED Life Time
Beam Angle
Housing Material
Solar Panel Material
Controller
Work Mode
Automatic Sunshine Control
5 Hrs Full Brightness + 25% brightness Dimming till dawn
8-9 Hours (1000W/m2)
4000K / 5000K
>70
>50,000 Hours
210°
Aluminum Alloy and Polycarbonate lens
Tempered Glass Crystalline Panel
JSCL-SOL-12-5W
JSCL-SOL-24-10W
JSCL-SOL-36-15W
JSCL-SOL-48-20W
STEP 1:
Drill mounng holes.
Note: Models JSCL-SOL-12-5W and JSCL-SOL-24-10W have three
holes and JSCL-SOL-36-15W and JSCL-SOL-48-20W have five holes.
See 1.
STEP 2:
Install the wall anchors
Note: Models JSCL-SOL-12-5W andJSCL-SOL-24-10W have one hole
and JSCL-SOL-36-15W and JSCL-SOL-48-20W have two holes. See 2.
STEP 3:
Install the solar light through the hanging holes on the back of the
light. Note: Screws should not be in all the way. Allow a distance of
about 0.12” (3mm) from the wall. See 3.
STEP 4:
Adjust the solar light with the screws. See 4.
STEP 5:
Remove the protecve film from the light. See 5.
STEP 6:
Turn on the switch for the first me and it will work automacally
everyday. See 6.
JSCL-SOL-12-5W
JSCL-SOL-24-10W
JSCL-SOL-36-15W
JSCL-SOL-48-20W
JSLC-SOL SERIES
SOLAR SIGN/BILLBOARD LIGHT INSTALLATION INSTRUCTIONS
Construcon and Materials
Aluminum Alloy Housing and Polycarbonate Lens
Tempered Glass Crystalline Solar Panel
Direct Wall Mount
Opcal System
210° Light Distribuon
Electrical System
Power: 5W / 10W / 15W / 20W
CCT: 4000K / 5000K
Sizes: 1FT / 2FT / 3FT / 4FT Models Available
Voltage: Solar Panel 5.5V Baery: 3.7V
Efficacy: 100 lm/W
CRI: >70
Operang Temp: -4°F to 149°F (-20C to 300C)
Charging Temp: 32°F to 113°F (0C to 45°C)
Operaon Mode
First 4 hours 100% brightness, 25% brightness ll dawn
Cerficaons and Compliance
Ingress Protecon: IP65 for Wet Locaons
RoHS Compliant
Meets FCC Part 15, Subpart B, Class A limits for conducted and radiated emissions
Lifeme: ≥ 50,000 Hrs
/