2. Atlas Metal Industries
  3. BCFT-HL

Atlas Metal Industries BCFT-HL, BCFT, BCFT-H, BCFT-L, BCH, BCHL Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Atlas Metal Industries BCFT-HL Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
DESIGNER SERIES SNEEZE GUARDS
BUFFET CANOPY SINGLE
BCFT - Series (Flip Top)
BCS - Stainless Steel Canopy with Sneeze Guards
BCFT
Stainless steel buffet canopy
with sneeze guard
BCFT-L
Stainless steel buffet canopy
with sneeze guard & fluorescent light
BCFT-H
Stainless steel buffet canopy
with sneeze guard and food warmer
BCFT-HL
Food warmer and incandescent lamps
Item No.
Quantity
SPECIFICATIONS:
Canopy is constructed of 18 gauge stainless steel,
welded, ground and polished to a uniform finish to
accept the 1/4” thick scratch resistant plexiglass,
sneeze guards.
(BCL - unit only) provided with fluorescent light fix-
ture for 120/60/1 operation prewired with shatter-
proof safety shield and on/off switch.
(BCH - unit only) provided with food warmer mount-
ed under canopy top for 208/60/1 prewired operation.
(BCHL - unit only) provided with food warmer and
incandescent lamps 120/208/60/1
Specifications subject to change without notice.
MODEL
SIZE
LENGTH
(inches)
BCH
(watts @ 120 V)
BCHL
(watts @ 120 V)
BCFT 30” 450 570
BCFT 40” 675 855
BCFT 54” 925 1165
BCFT 68” 1275 1635
BCFT 85” 1500 1860
Note: Special voltages are available. Contact factory.
* Fluorescent light fixtures will add approximately 1 amp. to power load.
CW-52A
ACCESSORIES:
Plastic Laminate Trim (PLT)
End Guards (EGB)
10/08-SC
20”
A
Rear Elevation
10 5/8”
14”
End View
/