Atlas Metal Industries BCDFT-HL, BCDFT, BCDFT-H, BCDFT-L, BCH, BCHL Datasheet

  • Hello! I am an AI chatbot trained to assist you with the Atlas Metal Industries BCDFT-HL Datasheet. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 Fax: (305) 623-0475
DESIGNER SERIES SNEEZE GUARDS
BUFFET CANOPY DUAL
BCDFT - Series (Flip Top)
BCD - Stainless Steel Canopy with Sneeze Guards
BCDFT
Stainless steel buffet canopy
with sneeze guard
BCDFT-L
Stainless steel buffet canopy
with sneeze guard & fluorescent light
BCDFT-H
Stainless steel buffet canopy
with sneeze guard and food warmer
BCDFT-HL
Stainless steel buffet canopy
with sneeze guard and food warmer
w/ incandescent light
Item No.
Quantity
SPECIFICATIONS:
Canopy is constructed of 18 gauge stainless steel,
welded, ground and polished to a uniform finish to
accept the 1/4” thick scratch resistant plexiglass,
sneeze guards.
(BCDFTL - unit only) provided with fluorescent light
fixture for 120/60/1 operation prewired with shatter-
proof safety shield and on/off switch.
(BCDFTH - unit only) provided with food warmer
mounted under canopy top for 208/60/1 prewired
operation.
(BCDFTHL - unit only) provided with food warmer
and incandescent lamps 120/208/60/1
Specifications subject to change without notice.
MODEL
SIZE
LENGTH
(inches)
BCH
(watts @ 120 V)
BCHL
(watts @ 120 V)
BCDFT 30” 450 570
BCDFT 40” 675 855
BCDFT 54” 925 1165
BCD FT 68” 1275 1635
BCDFT 85” 1500 1860
Note: Special voltages are available. Contact factory.
* Fluorescent light fixtures will add approximately 1 amp. to power load.
CW-51A
ACCESSORIES:
Plastic Laminate Trim (PLT)
End Guards (EGB)
20”
A
Rear Elevation
10 5/8”
14”
End View
10/08-SC
/