Quickstart Guide
Thank you for choosing Xcellon.
The Xcellon MWO-EV6 is a wireless ergonomic mouse with a vertical orientation and
sculpted shape that minimizes hand, wrist, and arm fatigue and discomfort. Its 6-button
design puts all the controls right at your fingertips. Just connect the nano receiver to
an available USB port on your computer, and enjoy the comfort of your arm and wrist
resting in a tension-free, neutral position while you work.
2
1
3 4 5 86 7
11 12 13910
Overview
1 Scroll wheel
2 DPI switch
Press to select between 800, 1200
(default), and 1600 DPI
3 Left mouse button
4 Right mouse button
5 Page forward browser button
6 Page back browser button
7 Optical sensor
8 Power switch
9 Outer light
10 Inner lights
11 Nano receiver
12 Battery Compartment
13 Receiver storage compartment
14 2× AAA Batteries (not shown)
Operating the Mouse
1 Remove the battery compartment door and install the AAA batteries into the battery
compartment. Note the diagram inside the compartment for the correct orientation.
2 Switch the power button to the on position.
Important! The outer light on the mouse will flash if the batteries are low.
3 Remove the nano receiver from the receiver compartment. Make sure your computer is
connected to the internet, and plug the receiver into an available USB port. The computer
will automatically download the appropriate driver. Once the driver has been downloaded,
your mouse is ready to use.
Specifications
Compatibility Windows, Mac*, Linux
DPI 800, 1200 (default), 1600
Power AAA batteries (×2)
Connection 2.4 GHz with nano receiver
Dimensions (H × W × D) 2.4” × 2.7” × 4.9” (6.2 × 6.8 × 12.4 cm)
Weight (without
batteries)
3.4 oz. (97 g)
* Forward and Back browser buttons are not recognized by Mac OS.
All images are for illustrative purposes only.
This XCELLON product is warranted to the original purchaser to be free from defects in materials and
workmanship under normal consumer use for a period of eighteen (18) months from the original purchase date
or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect
to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion, of any product
that fails during normal use of this product in its intended manner and in its intended environment. Inoperability
of the product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the
warranty provider reserves the right to replace it with a model of equivalent quality and function.
This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper
installation or maintenance. EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY
EXPRESS WARRANTIES NOR ANY IMPLIED WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. This warranty provides you
with specific legal rights, and you may also have additional rights that vary from state to state.
To obtain warranty coverage, contact the Xcellon Customer Service Department to obtain a return merchandise
authorization (“RMA”) number, and return the defective product to Xcellon along with the RMA number and
proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
For more information or to arrange service, visit www.xcellongear.com or call Customer Service at 212-594-2353.
18-Month Limited Warranty
Product warranty provided by the Gradus Group.
www.gradusgroup.com
Xcellon is a registered trademark of the Gradus Group.
© 2016 Gradus Group LLC. All Rights Reserved. GG1
/