Xcellon USB-EA User manual

Brand: Xcellon

Model: USB-EA

Category: External hard drives

Type: User manual

User Manual

Thank you for choosing Xcellon.

The Xcellon USB-EA Ethernet adapter adds a Gigabit Ethernet port to your Mac or PC. It provides

secure and reliable Internet access via a wired connection and oers 10/100/1000 Mbps Ethernet

speeds.

This adapter is bus powered, so no external power source is needed. Just plug it into an available

USB port on your computer and go to work. Full duplex operation is supported, ensuring the fastest

data transfer speed possible. Backwards compatibility with USB 2.0 and 1.1 make this versatile

adapter compatible with most computers.

Precautions

»Please read and follow the instructions in this manual for proper use of this device.

»Keep this product away from water and ﬂammable gases or liquids.

»Use a soft, slightly moistened cloth when cleaning. Do not use solvents or abrasive substances.

»This product has no serviceable parts.

»Do not open this device for maintenance.

»All images are for illustrative purposes.

System Requirements

»Windows XP or later

»Mac OS X 10.6 or later

»Linux 2.6.14 or later

345

Overview

Front

1 USB Standard-A connector

2 Power LED (blue)

Bottom

3 Activity LED (yellow)

4 Ethernet port

5 Connection LED (green)

Installing the Driver

Important: If your computer does not have a CD drive, drivers can be downloaded from

www.xcellongear.com/downloads.

1 Insert the included CD into your computer’s CD drive. The AutoPlay window may open.

2 Click on “Open Folders” to view the ﬁles on the CD and click on the Windows, Mac, or Linux folder depending

on your operating system.

·Windows: Open the folder of your Windows operating system and double-click on the .exe ﬁle “setup”.

Follow the instructions in the setup wizard.

Note: For Windows XP, open the folder labeled AllInOne_5009_12232015.

·Mac OS: Double-click on the .pkg ﬁle. Follow the instructions in the setup wizard.

·Linux: The makeﬁle is located in the Linux folder. Run make_install from the driver directory.

Advanced installation instructions can be found on www.xcellongear.com/downloads.

Using the Adapter

1 Plug the USB Standard-A connector into an available USB port on your computer. The blue LED indicator will

light up when the adapter is receiving power.

2 Plug the Ethernet cable into the Ethernet port of the adapter. On either side of the Ethernet port, the green

LED indicator will show that you have an Ethernet connection, and the yellow LED indicator will ﬂash to

show activity.

Problem Solution

I can’t connect to

the Internet or the

Power LED is not on.

• Make sure the adapter is plugged into a powered USB port on your computer.

• Make sure you have correctly installed the software drivers from the

included CD.

• Download the latest driver from xcellongear.com/downloads.

Troubleshooting

Speciﬁcations

Port Gigabit Ethernet

PC Connection USB Standard-A

Construction Aluminum

System Requirements Windows XP or later / Mac OS X 10.6 or later / Linux 2.6.14 or later

USB Compatibility 3.0, 2.0, 1.1

Speed USB: SuperSpeed USB 3.0 5 Gbps / Ethernet: 10/100/1000 Mbps

Supported Ethernet Standards IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3az

Cable Length 7.1” (18 cm)

Dimensions (H × W × D) 1” × 1.3” × 2.9” (2.5 × 3.3 × 7.45 cm)

Weight 1.2 oz. (34 g)

This XCELLON product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer

use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty

provider’s responsibility with respect to this limited warranty shall be limited solely to repair or replacement, at the provider’s discretion,

of any product that fails during normal use of this product in its intended manner and in its intended environment. Inoperability of the

product or part(s) shall be determined by the warranty provider. If the product has been discontinued, the warranty provider reserves the

right to replace it with a model of equivalent quality and function.

This warranty does not cover damage or defect caused by misuse, neglect, accident, alteration, abuse, improper installation or maintenance.

EXCEPT AS PROVIDED HEREIN, THE WARRANTY PROVIDER MAKES NEITHER ANY EXPRESS WARRANTIES NOR ANY IMPLIED

WARRANTIES, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR

PURPOSE. This warranty provides you with speciﬁc legal rights, and you may also have additional rights that vary from state to state.

To obtain warranty coverage, contact the Xcellon Customer Service Department to obtain a return merchandise authorization (“RMA”)

number, and return the defective product to Xcellon along with the RMA number and proof of purchase. Shipment of the defective

product is at the purchaser’s own risk and expense.

For more information or to arrange service, visit www.xcellongear.com or call Customer Service at 212-594-2353.

One-Year Limited Warranty

Product warranty provided by the Gradus Group.

www.gradusgroup.com

Xcellon is a registered trademark of the Gradus Group.

Xcellon USB-EA User manual

Brand: Xcellon

Model: USB-EA

Category: External hard drives

Type: User manual

Download PDF

report

Xcellon USB-EA User manual

Xcellon USB-EA User manual

Related papers

Other documents