Livoo TES211 User manual

  • Hello! I am an AI chatbot trained to assist you with the Livoo TES211 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
User manual
WWW.LIVOO.FR
Reference : TES211
Version : 1.4
Language : English
2 in 1 Wireless
Bluetooth®
earbuds
User manual
1
Thank you to have purchased a product brand Livoo. We take great care in design, ergonomics and simple
use of our products. We hope that this product will give you complete satisfaction.
PLEASE READ ALL INSTRUCTIONS CAREFULLY
This instruction manual is also available on our website www.livoo.fr
SAFETY INSTRUCTIONS
Never dissemble the Bluetooth
®
Earbuds in an attempt to make any repairs as this could result in electrical shock,
burns or product failure.
Use extra caution while children are using the Bluetooth
®
Earbuds.
Earbuds and power case are not waterproof or water resistant;
Use extra caution in high temperatures;
Do NOT the device in water or very humid places, such as swimming pools or bathrooms;
Damage, shock, and/or injury can occur if this warning is not heeded properly;
The Bluetooth
®
Earbuds are not covered under warranty when the product has metal rust, surface spalling and any
other natural oxidation.
MAIN SPECIFICATION
Bluetooth
®
Version: WT 4.2+EDR
Bluetooth
®
range: 10m
Battery: 3.7V 50mAh
Charging box: 400mah
Working time: ≥1.5H
Charging time: 1 hours
Standby time: ≥20H
Sensitivity: -42±3DB
Bluetooth
®
support agreement: A2DP
Frequency range: 2.402GHz~2.480GHz
Built in: Microphone
User manual
2
OPERATION
Charging the box:
The first time before using the earbuds, please make sure the charging box is fully charged. Use a USB cable to
charge it. White light will be shinning and shows the power of the charging box. One LED light means 25% was
charged. When it is fully charged, 4 LED lights will be on.
Charging time for the box: normally 1-2 hours
When charging for the box, it can also charge the earbuds in the same time.
Charging the earbuds
The first time before using the earbuds, please make sure it is fully charged. Please put it into the charging box.
Charging time for the earbuds: normally 1 hour
Charging indication: Red LED light means it is charging. When it is fully charged, red LED light will go out.
Battery low voltage indication: when it is low voltage, the earbud will warns “battery low” every 1 minute. In this
situation, please charge the earbuds to avoid affecting the battery life.
If the earbuds haven’t been used after long time or the earbuds battery is totally run out, the light of the earbuds
will be on after several minutes when charging it.
The earbuds will turn off automatically if it is not charged a period after receiving the low voltage indication.
User manual
3
Pairing the earbuds with your phone:
A. Automatical Mode:
Make sure that the earbuds are charging in red light.
Make sure that both earbuds are taken out from the charging box at the same time. The two earbuds will be
turned on and paired automatically after 3 seconds with white light flashing. After two earbuds connected, main
earphone will be with red and white light flashing alternately.
Activate your pairing device’s Bluetooth
®
feature. Search for “TES211” and select it to connect with your phone.
B. Hand-operated mode:
(1)The first time using the earbuds, please pair one of the earbuds with the phone first. Turn on the other earbud
after it is connected with your phone.
Make sure that the earbuds are no more than 1 meter from the phone.
Make sure that both earbuds are off.
Press one of the earbuds for 3 seconds until the red light and white light flashes alternately. Activate your pairing
device’s Bluetooth
®
feature. Search for “TES211and select it to connect.
Turn on the other earbud after last step (press it for 2 seconds until white light is on). After the second earbud is
connect, the white light will flash every 8 seconds; if red light is flashing, it means the two earbuds is not
connected, click the earbud to connect.
Note:
1. If not connected 5mins after turn on the earbud, the earbud will turn off automatically.
2. Make sure that the distance between the earbuds and the phone is no more than 10 meters and no obstacles
between them. Then you can listen to the music on your phone and make phone calls by the earbuds.
(2)
When two earbuds fail to connect with each other:
Under the pairing condition for earbuds(Both earbuds are with red light and white light flashes alternately), double
click one of earbuds, after 3 seconds, main earbud will be red light and white light flashes alternately. Light of the other
earbud is off. Then the two earbuds paired successfully.
Search for TES211 and select it to connect with your phone.
Listen to the music:
(1) Answer phone call when listening to music:
If there is phone calls, the music will be suspended. You can hear the ringing in the earbud. Click the earbud to
answer the phone call. You can only take phone calls by the host earbud. You can play music by clicking the earbud
or your phone after the phone call is over.
(2)Click the earbud to pause the music
EU DECLARATION OF CONFORMITY
User manual
4
We
DELTA
BP61071
67452 Mundolsheim – France
Herewith declare under our sole responsibility, that the radio equipment
Bluetooth® earphones
TES211 (Frequency range 2402MHz-2480MHz)
Fulfils the essential requirements of the Directive 2014/53/UE
The following standards were applied:
Radio:
EN 300 328 V2.1.1 : 2016
EMC:
EN 301 489-1 V2.1.1 : 2017
EN 301 489-17 V3.1.1 : 2017
EN 55035 : 2015
Health and Safety:
EN 60950-1 2006+A11 2009+A1 2010+A12 2011+A2 2013
EN 62479: 2010
Mundolsheim 14/08/2018
User manual
5
Correct disposal of the unit
(Electrical and Electronic Equipment)
(Applicable in the European Union and the rest of Europe that have adopted separate collection systems
countries)
The European Directive 2012/19/UE on Waste Electrical and Electronic Equipment (WEEE), requires that old
household electrical appliances must not be disposed of in the normal household waste stream. Old appliances must be
collected separately in order to optimize the recovery and recycling of the materials they contain and reduce the impact on
human health and the environment. The symbol of the crossed out dustbin is marked on all products to remind the obligations
of separate collection. Consumers should contact their local authority or retailer for information concerning the correct disposal
of their product.
Non contractual illustration
Product information is subject to change without prior notice.
LIVOO
BP 61071
67452 Mundolsheim
/