Instruction Manual
1
Thank you for buying our LIVOO product. We take great care in design, ergonomics and ease of use of our
products. We hope that this product will give you complete satisfaction.
This instruction manual is also available on our website
www.livoo.fr
IMPORTANT SAFETY INSTRUCTIONS
BEFORE USING THE APPLIANCE FOR THE FIRST TIME, PLEASE READ CAREFULLY THESE INSTRUCTIONS
BEFORE USING THE APPLIANCE AND SAVE IT FOR ANY FURTHER NEED.
o Do not use other cable than that supplied with the product.
o In case of dysfunction, entrust your wireless charger to a specialist.
o No pieces can be repaired or replaced by the user.
o Any signs of wear and tear please discard immediately.
o Maintain your product shielded from dust, rain, water or from humidity.
o Do not subject your product to sources of inflammation or important heat. Do not throw it to the
fire.
o Do not place the wireless charger near magnets.
o Maintain your product out of reach children.
o Wipe clean with a damp cloth only. Do not use detergents.
SPECIFICATIONS
Charging current: 500mAh-1000mAh
Input voltage: DC9V/1.5A~2A
Output voltage: 9V± 1A-1.5A
Induction charger fast charge 15W
Transmission distance: Max 10 mm, 2~4mm recommended
Over heat protection: When charging temperature is higher than 53℃, it will shut down for 1 min and restart
when cooled down
Overload protection: When output current is higher than 1.8A, it automatically shuts down for protection
USE
Your
Mouse pad wireless charger is a b
uilt-in desktop organizer for cables, smartphones, business cards and
more with integrated dual decimeter ruler.
Compatible with all smartphones and QI certified devices
1. Insert USB charging cable (included) into power adaptor or computer.
2. If your mobile is not equipped with QI technology, please select the correct receiver (not included)
and plug the compatible receiver on the proper input of your phone.
3. Place your phone onto the wireless charger area. Your device is now charging.
4. Disconnect the wireless charger after use.