USER MANUAL
CAMERAS IP H.264 1080P FULLHD
Page: 1 Page: 1
DSE SRL - ITALY - WWW.DSE.EU
RH-TCC1 BCC1 RH-RH-DCC1
IP Cameras Full HD 1080p H.264
Introduction
The RH series consists of IP network cameras with H.264 compression and maximum FULL HD
1920x1080 resolution. The units are connected to a LAN via RJ45 port as any PC or other
device and the images are displayed on the PC on the network using a standard Internet
browser or special registration programs. applications are also available for access by
smartphone.
The megapixel resolution allows image detail not
attainable with analog systems. The format 16: 9 Full HD, now an established television standard, is the new dimension of
surveillance, optimal for viewing on wide screen TV or monitor. The RN series of network equipment using H.264 compression, the
latest evolution in digital video compression that allows fidelity and bandwidth economy.
The RH Series cameras support ONVIF protocol 1 and 2 and are compatible with any IP recording software or network video
recorder (NVR) multiprotocol. And 'it is including network recording software for Windows XP / Vista / 7.
USER MANUAL
CAMERAS IP H.264 1080P FULLHD
Page: 2 Page: 2
DSE SRL - ITALY - WWW.DSE.EU
Technical data
RH-TCC1 RH-BCC1 RH-DCC1
Camera Type IP camera IP camera IP camera
Sensor
APTINA 1 / 2.5 "progressive scan
CMOS 5 Mega Pixel
APTINA 1 / 2.5 "progressive scan
CMOS 5 Mega Pixel
APTINA 1 / 2.5 "progressive scan
CMOS 5 Mega Pixel
Color or black / white
colors with function
Day / Night
colors with function
Day / Night
colors with function
Day / Night
maximum resolution Full HD: 1920x1080 Full HD: 1920x1080 Full HD: 1920x1080
Frame rate up 25 f / sec 25 f / sec 25 f / sec
video Compression H264 high profile / MJPEG H264 high profile / MJPEG H264 high profile / MJPEG
audio Compression
G711 A-Law / G711 U-Law / RAW-PCM G711 A-Law / G711 U-Law / RAW-PCM G711 A-Law / G711 U-Law / RAW-PCM
Lan RJ45 10 / 100Base-T RJ45 10 / 100Base-T RJ45 10 / 100Base-T
Connection integrated Wi-Fi - - -
Power over Ethernet (POE) IEEE802.3af IEEE802.3af IEEE802.3af
audio Input
Microphone built +
Unmute input. External
(Minijack 3.5 mm)
Unmute input. External
(RCA female)
Unmute input. External
(RCA female)
Speakers Audio Out 3.5 mm minijack RCA female RCA female
Alarm inputs 1 - 1
Alarm outputs 1 - 1
RS485 output for PTZ and speed dome keyboards
Pelco-P / D - Pelco-P / D
Day / Night Yes Yes Yes
Lighting infrared
compatible
840nm ... 1100nm 840nm ... 1100nm 840nm ... 1100nm
integrated LED - 30 m. 20 m.
USER MANUAL
CAMERAS IP H.264 1080P FULLHD
Page: 3 Page: 3
DSE SRL - ITALY - WWW.DSE.EU
automatic IR cut filter (ICR) Yes Yes Yes
AWB Yes Yes Yes
Analog Video Output BNC RCA female BNC
memory slots microSD SD microSD
Supply 9 ... 12V DC or PoE 9 ... 12V DC or PoE 9 ... 12V DC or PoE
Absorption Max. 5W Max. 5W Max. 5W
230VAC power supply Not included Not included Not included
Attaching the CS CS CS
Objective Standard Nobody Varifocal 2.8 ... 12 mm. Varifocal 2.8 ... 12 mm.
interchangeable Lens Yes No No
Operating temperature - 10 ° C ... + 50 ° C - 10 ° C ... + 50 ° C - 10 ° C ... + 50 ° C
Degree of protection IP40 IP66 IP66
External dimensions (mm.)
Lung 130 x W 75 x H 62
(without lens)
Only camera body diam. 74 x length 190 Room
with bracket width 110 x height 110 x 377 lung Diam 123 Height
110
Weight 480 gr. 1690 gr. 880 gr.
ONVIF Protocol 2.1 2.1 2.1
PPPoE protocol Yes Yes Yes
DHCP Protocol Yes Yes Yes
SMTP Protocol Yes Yes Yes
FTP protocol Yes Yes Yes
UPnP Protocol Yes Yes Yes
RTSP protocol Yes Yes Yes
Protocol 3GPP / ISMA Yes Yes Yes
Other protocols supported
TCP / IP, RTP, RTCP, HTTP, TCP, UDP, IPv4 /
IPv6
TCP / IP, RTP, RTCP, HTTP, TCP, UDP, IPv4 /
IPv6
TCP / IP, RTP, RTCP, HTTP, TCP, UDP, IPv4 /
IPv6
DDNS Support Yes (3322 / DynDNS) Yes (3322 / DynDNS) Yes (3322 / DynDNS)
supported browsers Internet Explorer Internet Explorer Internet Explorer
Password protection
Multi-level user with programmable access Multi-level user with programmable access Multi-level user with programmable access
Motion detection Yes Yes Yes
Sending images on alert E-mail E-mail E-mail
Recording on SD Memory
Scheduled or on alarm (with recording days
limitation)
Scheduled or on alarm (with recording days
limitation)
Scheduled or on alarm (with recording days
limitation)
USER MANUAL
CAMERAS IP H.264 1080P FULLHD
Page: 4 Page: 4
DSE SRL - ITALY - WWW.DSE.EU
custom overlays
Yes Yes Yes
Privacy Masks Yes Yes Yes
Registration Remote HD FTP or NAS FTP or NAS FTP or NAS
contemporary Client Up to 10 Up to 10 Up to 10
USER MANUAL
CAMERAS IP H.264 1080P FULLHD
Page: 5 Page: 5
DS E SRL - The TALY - WWW.DSE.EU DS E SRL - The TALY - WWW.DSE.EU DS E SRL - The TALY - WWW.DSE.EU
Installation
RH-TCC1 - room BoxRH-TCC1 - room BoxRH-TCC1 - room Box
LENS ASSEMBLY
The camera body is provided with a rotary dial to adjust the position of the optical sensor. In this way it is possible to focus on any
type of target without having to resort to spacer rings. Once the lens screwed, adjust the focus. The camera has a BNC analog video
output in order to connect possibly a small portable monitor and adjust the focus on location. Acting by turning the adjusting nut if you
are unable to obtain an image in sharp focus with the only mass of the lens.
USE OF OBJECTIVES AUTOIRIS
The camera allows the use of fixed iris lenses, manual and automatic. In the latter case the lens auto iris is provided with a connector
to be connected to the camera body. The camera is compatible with all oiettivi autoiris DC drive type with the following wiring
connections.
Video DC 1 NC
Control +
2 VCC Control-
3 GND Drive-
4 Video Drive + 4 Video Drive +
USER MANUAL
CAMERAS IP H.264 1080P FULLHD
Page: 6 Page: 6
DSE SRL - ITALY - WWW.DSE.EU
REAR CONNECTIONS
• AUDIO IN - MICROPHONE INPUT - The camera is equipped with built-in microphone, however, a 3.5 mm mini-jack for connecting
an external microphone is available. The choice between the two sources is carried out in configuration. (Impedance 1 KOhm)
• AUDIO OUTPUT - This 3.5 mm jack allows you to connect the local speakers. This feature allows you to create a two-way audio
conversation between the person in front of the camera and the operator in front of the client PC. (Impedance sup.16 Ohm)
• Micro SD CARD SLOT - Slot to insert a Micro SD card (up to 32GB) to save aboard the same camera images.
• 12VDC - plug that connect the power supply 220VAC / 12VDC (not included). Alternatively, it is possible to feed the camera POE
directly from the network if the network switch
USER MANUAL
CAMERAS IP H.264 1080P FULLHD
Page: 7 Page: 7
DSE SRL - ITALY - WWW.DSE.EU
It supports this feature.
• NIC (NETWORK) RJ45 - RJ45 FEMALE connector to connect the network. To connect to a hub or network switch using a standard
LAN cable. To connect a PC directly just use a crossover cable.
• RS485 - This port allows you to connect external devices such as PTZ and speed dome cameras to control them via the web
interface of the camera. Supported Protocols Pelco P / D.
• ALARM IN / OUT - alarm entrance, between the IN and COM terminals can be connected with a voltage input between 5 and
12VDC. In programming it is possible to define whether the alarm is considered in the presence or in the absence of tension. The
alarm output is used to actuate external devices such as acoustic or luminous alarms. The contact is ON / OFF type with maximum
load can be driven directly to 300mA at 12VDC. In programming it is possible to set the operation (NO / NC), the eventual
intermittently, and the duration of activation in the event of an alarm.
Example output connection
Example input connection
• VIDEO OUT - BNC output to connect analog monitors. Connects such as a portable monitor to comfortably focus on the goal after
installation. CAUTION: this output may not be active if disabled in the camera configuration.
• RESET - Button to restore the factory settings. Hold for 5 seconds to restore the factory settings including network data.RESET - Button to restore the factory settings. Hold for 5 seconds to restore the factory settings including network data.
MOUNTING THE CAMERA
If installed inside the camera it can be fixed to the wall with a bracket for cameras such as RE-ST2L. For outdoor installation should be
used as a protective case
USER MANUAL
CAMERAS IP H.264 1080P FULLHD
Page: 8 Page: 8
DSE SRL - ITALY - WWW.DSE.EU
RE-C3.
USER MANUAL
CAMERAS IP H.264 1080P FULLHD
Page: 9 Page: 9
DSE SRL - ITALY - WWW.DSE.EU
RH-BCC1 - Waterproof camera with IR illuminator 30 m.RH-BCC1 - Waterproof camera with IR illuminator 30 m.
GOAL SETTING
The camera is provided competa adjustable lens from 2.8 to 12 mm focal length so as to allow a perfect adjustment of the area to be
framed. The camera body is provided with two knobs to adjust the focal length (ZOOM) and the focus (FOCUS) that can be rotated
without using any tool. It 'also local analog video output with RCA connectors behind the tin lid on the bottom of the camera. This
output can be used to connect a monitor locally and be able to adjust the lens to the actual position of the camera operation.
Adjust with the screw of the focal area framed and subsequently act on the screw of the focus in order to optimize the vision.
CONNECTIONS
The connections are placed at the end of the cable that protrudes from the camera body. The cable connections is 40 cm long and is
used to reach a protected box to be prepared to accommodate inside the connectors.
USER MANUAL
CAMERAS IP H.264 1080P FULLHD
Page: 10 Page: 10
DSE SRL - ITALY - WWW.DSE.EU
• RJ45 (NET) (1) - MALE RJ45 connector to connect the network. To connect to a hub or network
switch using a standard LAN cable. To connect a PC directly just use a crossover cable. It
provided an RJ45 adapter female-female for connecting a cable with male connector.
• AUDIO IN (2) - MICROPHONE INPUT - The camera is equipped with an RCA female connector to connect an external
microphone. (Impedance 1 KOhm)
• AUDIO OUTPUT (3) - The camera is equipped with an RCA female connector which allows connection of local speakers. This
feature allows you to create a two-way audio conversation between the person in front of the camera and the operator in front of
the client PC. (Impedance sup.16 Ohm)
• 12VDC (4) - RTB two places that connect the power supply 220VAC / 12VDC (not included). Alternatively, it is possible to feed the
camera POE directly from the network if the network switch supports this feature.
USER MANUAL
CAMERAS IP H.264 1080P FULLHD
Page: 11 Page: 11
DSE SRL - ITALY - WWW.DSE.EU
• ZOOM ADJUSTMENT (1) - Adjusts the focal length of 2.8 to 12 mm
• SETTING FIRE (2) - Adjust the focus
• Micro SD CARD SLOT (3) - The slot to insert a Micro SD card (32GB max) to save on board images from the same camera is
placed behind the pond door located on the underside of the camera.
• VIDEO OUT (5) - E 'this female RCA output for connecting analog monitor. Connects such as a portable monitor to comfortably
focus on the goal after installation. The connector is placed behind the pond door located on the underside of the camera.
CAUTION: this output may not be active if disabled in the camera configuration.
• RESET (7) - The button to restore the factory parameters, including the network parameters, is placed behind the pond door located RESET (7) - The button to restore the factory parameters, including the network parameters, is placed behind the pond door located
on the underside of the camera. Hold for 5 seconds to restore the factory settings including network data.
• RED LED (4) - Set behind the pond door on the underside of the camera indicates the correct power of the camera with external
power supply 12VDC
• YELLOW LED (6) - Set behind the pond door on the underside of the camera indicates the correct dialogue with the network
switch.
MOUNTING THE CAMERA
The camera has a sealed container that allows its installation in the exterior without protections.
USER MANUAL
CAMERAS IP H.264 1080P FULLHD
Page: 12 Page: 12
DSE SRL - ITALY - WWW.DSE.EU
E 'it supplied with the camera fixing a metal ring to be fixed to the wall with 4 anchors (supplied) using the drilling template included in the
package. On the ring bearing the inscription TOP to indicate the side to be kept at the top. On this ring, firmly anchored to the wall, is
screwed with 4 screws the camera bracket always respecting the TOP written in such a way that the slit lateral cable outlet remains
downward. The cables can pass back of the bracket or exit laterally through the slit arranged in the bracket.
Attention to the seal placed on the fixing disk which must remain in position in its housing during the fastening of the bracket to ensure
the impermeability.
The bracket of the camera is equipped with 3 allen star ABC (key supplied) which must be loosened to allow the orientation on the 3
axes. Once the camera oriented properly it is necessary to retighten the bottom. Finally adjust the sun visor with the screw D
USER MANUAL
CAMERAS IP H.264 1080P FULLHD
Page: 13 Page: 13
DSE SRL - ITALY - WWW.DSE.EU
RH-DCC1 - Vandal proof, waterproof IR 20m.RH-DCC1 - Vandal proof, waterproof IR 20m.
MOUNTING THE CAMERA
The camera is closed in a vandal-proof sealed container that can be installed on the ceiling both internally and externally. The
camera is composed of 3 distinct parts: BASE FOR FIXING, CAMERA BODY AND SHELL DOME. First, it must separate the 3
elements. The cap is secured with Phillips screws (key supplied) and the camera body with screws to the cross.
Remove the Phillips screws tamper stopping the dome housing with the key
provided. If you plan on using the side cable access unscrew
cap with the key provided.
Remove the Phillips screws that join the chamber body with the fixing base.
USER MANUAL
CAMERAS IP H.264 1080P FULLHD
Page: 14 Page: 14
DSE SRL - ITALY - WWW.DSE.EU
Attach to the ceiling fixing base with dowels by means of the drilling template
provided. different mounting options with 2 or more anchors are available.
Once fixed the base to the ceiling make the electrical connection and re-enter
the chamber body, paying attention to the fastening lugs and rotating
clockwise.
Orient the camera toward the target to be captured. Screw the fixing screws
in the cross.
The camera is provided with a masking cap, which prevents us from seeing
the outside camera. Remove the masking plastic cap by pressing in
correspondence with the arrow.
Enter the TEST VIDEO cable provided in the set up on the card connector.
The cable is terminated with a BNC connector to which you can connect a
monitor for adjusting the lens.
On the lens 2 are adjustment screws that allow to modify FOCAL and FOCUS
lens. It should be noted that the screws must first be loosened with a
screwdriver to release the movement. At the end of the adjustment retighten
the screws to avoid unwanted movements of the lens.
USER MANUAL
CAMERAS IP H.264 1080P FULLHD
Page: 15 Page: 15
DSE SRL - ITALY - WWW.DSE.EU
Close the container by mounting the dome bubble.
CONNECTIONS
The connections are placed on the cable that protrudes from the camera
The cable connections is 40 cm long and is used to reach a protected box to be prepared to accommodate inside the connectors.
• AUDIO IN - MICROPHONE INPUT - The camera is equipped with a 3.5 mm mini-jack for connecting an external microphone.
(Impedance 1 KOhm)
• AUDIO OUTPUT - minijack 3.5 mm allows the connection of the local speakers. This feature allows you to create a two-way audio
conversation between the person in front of the camera and the operator in front of the client PC. (Impedance sup.16 Ohm)
• Micro SD CARD SLOT - The slot to insert a Micro SD card (up to 32GB) to save aboard the same camera images on the card is
placed behind the lens.
• 12VDC - plug that connect the power supply 220VAC / 12VDC (not included). Alternatively, it is possible to feed the camera POE
directly from the network if the network switch supports this feature.
• RJ45 (NETWORK) - MALE RJ45 connector to connect the network. To connect to a hub or network
switch using a standard LAN cable. To connect a PC directly just use a crossover cable. It provided
an RJ45 adapter female-female for connecting a cable with male connector.
• RS485 - (TX + / TX- / RX + / RX) This port allows you to connect external devices such as PTZ and speed dome cameras to
control them via the web interface of the camera. Supported Protocols Pelco P / D.
• ALARM IN / OUT - alarm entrance, between the IN and COM terminals can be connected with a voltage input between 5 and
12VDC. In programming it is possible to define whether the alarm is considered in the presence or in the absence of tension. The
alarm output is used to actuate external devices such as acoustic or luminous alarms. The contact is ON / OFF type with maximum
load can be driven directly to 300mA at 12VDC. In programming it is possible to set the operation (NO / NC), the eventual
intermittently, and the duration of activation in the event of an alarm.
Example output connection
USER MANUAL
CAMERAS IP H.264 1080P FULLHD
Page: 16 Page: 16
DSE SRL - ITALY - WWW.DSE.EU
Example input connection
• VIDEO OUT - output to connect analog monitors. Connects such as a portable monitor to comfortably focus on the goal after
installation. And 'placed on the camera board next to the SD card slot. CAUTION: this output may not be active if disabled in the camera
configuration.
• RESET - Button to restore the factory settings. And 'place on the camera card close to the SD card slot. Hold for 5 seconds to
restore the factory settings including network data.
USER MANUAL
CAMERAS IP H.264 1080P FULLHD
Page: 17 Page: 17
DSE SRL - ITALY - WWW.DSE.EU
Network Configuration
After providing power to the camera via a 12VDC power supply or via POE and after connecting the network you are necessary to
proceed to the configuration of the network parameters in order to be able to make the cameras are accessible from the PC on the
network. The cameras are supplied with address 192.168.0.120 Factorynetwork. The cameras are supplied with address 192.168.0.120 Factory
SOFTWARE IPSEARCH
The CD supplied with the camera software is included IPSEARCH that requires no installation and can easily be run on any PC on The CD supplied with the camera software is included IPSEARCH that requires no installation and can easily be run on any PC on The CD supplied with the camera software is included IPSEARCH that requires no installation and can easily be run on any PC on
the network. The function of this software is to detect the presence of the camera network regardless of its address and allow you
to configure the network address of the camera so as to be consistent with your network. We recall that because the camera is
visible from the other PCs on the network it is necessary that the first 3 address parts are the same as other network PC and is
equal also the subnet mask. And 'advisable to connect a network camera at a time, and insert new ones after you have set earlier.
PRELIMINARY CHECKS
Before you must obtain from your network some information about the management of the IP addresses used on your network. E
'need to know an IP address can be assigned to the camera that is not equal to any other device already present in the network. If
you are unsure about your network's operation you can use certain commands in DOS PROMPT
On a network PC launched a DOS window available between the Windows accessory programs. Type IPCONFIG at the
command prompt and press ENTER. They will see the TCP / IP parameters. The second line is the IP address assigned to your
computer.
USER MANUAL
CAMERAS IP H.264 1080P FULLHD
Page: 18 Page: 18
DSE SRL - ITALY - WWW.DSE.EU
In the above example the address of the PC on which you are working is 192.168.2.3 and the subnet mask used is the classic
255.255.255.0. The camera can therefore assign an address chosen by the 192.168.2.XXX type, where XXX stands for a number
between 0 and 255. E '
important choose an address that is not already used by other devices of network. To verify that the chosen address is important choose an address that is not already used by other devices of network. To verify that the chosen address is important choose an address that is not already used by other devices of network. To verify that the chosen address is
free, try to make a PING from the same DOS window by typing PING followed by a space and by the IP you wish to assign to the
camera. If there is no device responds to that address, you will receive 4 REQUEST TIME OUT as in the following example:
All cameras support the automatic IP address assignment from a DHCP server. This mode, however, is not recommended
because in the event of power failure or restart of the equipment it is possible that the cameras IP address change necessitating a
reconfiguration of recording software.
IPSEARCH OF USE TO ASSIGN IP ADDRESS
1. Insert the CD into a PC player and explore the content. You will find a folder called IPSEARCH inside some files. IP SEARCH
does not require installation. Double-click the IPSEARCH.EXE and will start the program.
E 'can copy this folder to a USB key to easily run the program on any PC on the network.
USER MANUAL
CAMERAS IP H.264 1080P FULLHD
Page: 19 Page: 19
DSE SRL - ITALY - WWW.DSE.EU
2. Click on START SEARCH button. The program will start to search for the IP cameras2. Click on START SEARCH button. The program will start to search for the IP cameras
RH series on the network. Wait to complete the search. IP search is able to detect even cameras with different address class from
that of the PC on which you are working.
3. When the search will see the list of detected cameras. If the camera is not3. When the search will see the list of detected cameras. If the camera is not
It was detected check the functionality of network links. Each camera is distinguished by a unique ID that is inherent in the device.
A appears beside the current IP address of the camera. In the right section, there are all the other network parameters and
password.
4. Of particular relevance are of the IP address (IP DEVICE) which must have the same class 4. Of particular relevance are of the IP address (IP DEVICE) which must have the same class
network (first three groups of equal numbers) and the SUBNETMASK which must be the same as that used by the network
(typically 255.255.255.0). You can edit the network parameters as desired by writing in the boxes.
5. Press MODIFY for transferring the pattern into the camera. 5. Press MODIFY for transferring the pattern into the camera.
USER MANUAL
CAMERAS IP H.264 1080P FULLHD
Page: 20 Page: 20
DSE SRL - ITALY - WWW.DSE.EU
with browser access
Once properly set the network parameters it is possible to perform the first access to the camera using the Internet browser you prefer,
for example INTERNET EXPLORER, SAFARI, FIREFOX, CHROME etc.
FLASH TECHNOLOGY SUPPORTS ALL BROWSERS
Unlike most IP cameras on the market, the RH cameras dialogue with the browser using Flash
technology instead of the traditional activeX. This way you have imported several advantages:
1 - Support for all internet browsers on the market, and all operating systems. You can connect
with your favorite browser (Internet Explorer, Firefox, Chrome, Safari etc) and use any Windows
or Mac OS to access the cameras without changing your habits.
2 - The camera web interface does not install external components (activeX) in the browser and therefore it is not necessary to intervene
in the settings, reducing the security parameters.
The web interface is based on ADOBE FLASH PLAYER the most common and efficient video player that will presumably already The web interface is based on ADOBE FLASH PLAYER the most common and efficient video player that will presumably already The web interface is based on ADOBE FLASH PLAYER the most common and efficient video player that will presumably already
installed on your PC if you have already used before to play an online video from sites like you tube or similar. If your PC does not have
installed ADOBE FLASH PLAYER is required to first access to the installation that you do for free in seconds.
ACCESS WITH BROWSER
To access the camera using the Internet browser just type the address in the browser bar as in the following example:
A window will appear first log-in for entering username and password for access.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/