Hailey Home PD1656 User manual

Brand
Hailey Home
Model
PD1656
Type
User manual

Hailey Home PD1656 is a pendant lamp designed for indoor use in dry locations. It features a simple and elegant design, perfect for adding a modern touch to any room. The lamp is compatible with E26 (medium) base light bulbs and supports a maximum wattage of 60W for incandescent bulbs, 9W for LED bulbs, 13W for fluorescent (CFL) bulbs, or 9W for self-ballasted LED bulbs. (Bulbs not included). Installation requires connecting the wires (white to white, black to black, and green/copper ground wire to the mounting plate ground) and securing the mounting bracket to the ceiling.

Hailey Home PD1656 is a pendant lamp designed for indoor use in dry locations. It features a simple and elegant design, perfect for adding a modern touch to any room. The lamp is compatible with E26 (medium) base light bulbs and supports a maximum wattage of 60W for incandescent bulbs, 9W for LED bulbs, 13W for fluorescent (CFL) bulbs, or 9W for self-ballasted LED bulbs. (Bulbs not included). Installation requires connecting the wires (white to white, black to black, and green/copper ground wire to the mounting plate ground) and securing the mounting bracket to the ceiling.

PENDANT LAMP
Save these instructions
CARE INSTRUCTIONS:
• Turnlightoandallowbulbtocoolbeforecleaning.
• Carefullywipecleanwithasoft,dryclothorstaticduster.
• Alwaysavoidtheuseofharshchemicalsorabrasivecleanersastheymay
causedamagetothexture’snish
Removethextureandthemountingpackagefromthebox
andmakesurethatnopartsaremissingbyreferencingthe
illustrationsontheinstallationinstructions.
IMPORTANT SAFETY INSTRUCTIONS:
• CAUTION –TURN OFF THE MAIN POWER AT THE
CIRCUIT BREAKER BEFORE INSTALLING THE FIXTURE,
IN ORDER TO PREVENT POSSIBLE SHOCK.
• CAUTION –If you feel you do not have enough electrical wiring experience contact a
qualiedlicensedelectricianforinstallationofyourlightingxture.
• Theseinstructionsareprovidedforyoursafety.Pleasereadcarefullyandcompletelybefore
beginningtheassemblyandinstallationofthislightingxture.
• Donotusetheelectriccordonly(withoutsteel/reinforcedcable)tosupporttheweightofthe
lightingxture.
• Thislightingxtureisintendedforindooruseonly,andindrylocations.
• Thislightingxtureisintendedforceilingmountonly,andconnectedonlyto3-wire,
single-phaseelectricalsupplysystemwithproperGroundwireorsystem.
• ForusewithE26(medium)baselightbulbsonly.
• Toavoidtheriskofre,donotexceedthemaximumwattageof60Wincandescentbulb,
or9WLEDbulb,or13Wuorescent(CFL)bulb,or9Wself-ballastedLEDbulb.
(Bulbsnotincluded)
WARNINGS:
• Toreducetheriskofre,electricalshock,orpersonalinjury:alwaysturnothislightingxture
andallowittocoolbeforeattemptingtoreplacethelightbulb.
• Donottouchlightbulbwhilextureisturnedon.
• Keepammablematerialsawayfromthislightingxture.
• Neverlookdirectlyatalitbulb.
1
Made in China PD1655PD1656PD1657rev062422EFSME1A
Do not discard any contents until after
assembly is complete to avoid accidentally
discarding small parts or hardware.
2
Required Supply Circuit: 120V, 60Hz
1/2 Inch (12.7 mm)
WHITE WHITE
BLACK BLACK
GREEN/COPPER GREEN/COPPER
1/2 Inch (12.7 mm)
1/2 Inch (12.7 mm)
1/2 Inch (12.7 mm)
!
1/2 Inch (12.7 mm)
1. Feed wires through the mounting
bracket (A).
2. Securely connect wires as shown
using wire connectors. Connect white
to white, black to black, and connect
the green or copper ground wire to the
mounting plate ground as shown.
3. Secure mounting bracket (A) to the
ceiling using long screws.
4. Secure ceiling cover (B) to the mounting
bracket (A) using short screws.
5. Determine the desired length of the
lamp cord, and secure length using
small screw (C) and tool (D).
6. Install the speciedlightbulb.
ForusewithlightbulbswithaE26(medium)base.
DO NOT EXCEED THE SPECIFIED WATTAGE.
A
B
C
D
LAMPE SUSPENSION
Conservez ces instructions
INSTRUCTIONS D’ENTRETIEN :
• Éteindrelalumièreetlaisserl’ampoulerefroidiravantdenettoyer.
• Essuyeravecprécautionavecunchiondouxsecouunplumeauantistatique.
• Éviteztoujoursd’utiliserdesproduitschimiquesfortsouagentsnettoyantsabrasifs,
carilspourrontendommagerlanitionduluminaire.
3
FabriquéenChine
CONSIGNES DE SÉCURITÉ ESSENTIELLES :
• ATTENTION – SECTIONNER L’ALIMENTATION AU NIVEAU
DU DISJONCTEUR AVANT D’INSTALLER LE LUMINAIRE,
AFIN D’ÉCARTER LE RISQUE DE CHOC ÉLECTRIQUE.
• ATTENTION–Sivouspenseznepasavoirsusammentdecompétences
decâblageélectrique,faitesinstallerleluminaireparunélectricienagréé.
• Cesconsignessontfourniesauxnsdevotresécurité.Veuillezleslireattentivementet
aucompletavantdecommencerl’assemblageetlamiseenplacedeceluminaire.
• Nepasutiliserlecordonélectriqueseul(sanscâblederenfortenacier)poursoutenirle
poidsduluminaire.
• Celuminaireestconçuexclusivementpouruneutilisationàl’intérieuretdansdesendroits
secs.
• Celuminaireestconçupourêtremontéauplafondseulementetraccordéàuncircuit
électriquemonophaséà3conducteursaveccircuitouconducteurdeterrecorrect.
• PourutilisationuniquementaveclesampoulesavecbasedeE26(moyenne).
• Pouréliminertoutrisqued’incendie,évitezdedépasserlapuissancemaximaleprescrited’une
ampouleàincandescencede60W,oud’uneampouleDÉLde9W,oud’uneampoule
uorescente(CFL)de13W,oud’uneampouleDÉLàballastintégréde9W.
(Ampoulesnonincluses)
AVERTISSEMENTS :
• Pourréduirelerisqued’incendie,dechocélectriqueoudeblessurecorporelle,toujours
éteindreceluminaireetlelaisserrefroidiravantdetenterdechangerl’ampoule.
• Évitezdetoucherl’ampoulependantqueleluminaireestsoustension.
• Gardeztoutematièreinammableéloignéedeceluminaire.
• Éviteztoujoursderegarderdirectementuneampouleallumée.
Sortirleluminaireetlenécessairedexationdel’emballage
etconsulterlesillustrationsdanslesinstructionsd’installation
pourvérierqu’ilnemanqueaucunepièce.
Ne mettez aucun élément de contenu au rebut
avant de terminer l’assemblage au complet, an
d’éviter de jeter accidentellement de petites
pièces ou un élément de quincaillerie.
4
Circuit d’alimentation requis : 120 V, 60 Hz
1/2 Inch (12.7 mm)
12,7 mm (½ pouce)
1. Faites passer les ls à travers la plaque de
xation (A).
2. Raccordez solidement les ls à l’aide de
connecteurs à ls tel que l’illustre la gure
ci-contre. Raccordez blanc à blanc, et noir
à noir, puis raccordez le l de masse vert ou
cuivre à la mise à la masse de la plaque de
xation tel que l’illustre la gure ci-contre.
3. Fixez la plaque de xation (A) au plafond à
l’aide de vis longues.
4. Mettez en place la couverture de plafond
(B) à la plaque de xation (A) en utilisant
les vis courtes.
5. Déterminez la longueur désirée du cordon
d’alimentation de la lampe, et sécurisez la
longueur choisie à l’aide d’une petite vis (C)
à tête triangulaire et d’un outil (D).
6. Installez l’ampoule spéciée.
Pourutilisationuniquementavecles
ampoulesavecbasedeE26(moyenne).
ÉVITEZ DE DÉPASSER LA PUISSANCE
MAXIMALE SPÉCIFIÉE
A
B
C
D
1/2 Inch (12.7 mm)
BLANC BLANC
NOIR NOIR
VERT/CUIVRE VERT/CUIVRE
1/2 Inch (12.7 mm)
1/2 Inch (12.7 mm)
1/2 Inch (12.7 mm)
!
LÁMPARA DE TECHO
Guarde estas instrucciones
INSTRUCCIONES DE CUIDADO:
• Desenchufelalámparaantesdelimpiarla.
• Limpieconunpañosuaveysecooconunpañoparaestática.
• Evitesiempreelusodelimpiadoresquímicosásperosoabrasivos,yaquepuedendañar
elacabadodelaccesorio.
5
Hecho en China
Extraigaelartefactoyelpaquetedemontajedelacajay
asegúresedequenofaltenpiezasvericandoconlas
ilustracionesdelasinstruccionesdemontaje.
INSTRUCCIONES IMPORTANTES DE SEGURIDAD:
• PRECAUCIÓN-ANTESDEINSTALARELARTEFACTOCORTE
LA ALIMENTACIÓN ELÉCTRICA PRINCIPAL EN EL DISYUNTOR
PARA EVITAR POSIBLES DESCARGAS ELÉCTRICAS.
• PRECAUCIÓN-Sicreequenotienesucienteexperienciaconcableseléctricos,
hagainstalarelartefactoporunelectricistacualicadoymatriculado.
• Estasinstruccionesseproporcionanparasuseguridad.Léalascuidadosamenteypor
completoantesdecomenzaraensamblareinstalarestalámpara.
• Noutilicesoloelcableeléctrico(sinunalambredeacero/reforzado)parasostenerelpeso
delalámpara.
• Estalámparaestádestinadaaserutilizadasoloeninterioresyenlugaressecos.
• Estalámparaestádestinadaasermontadaenelcielorrasoúnicamenteyconectadaaun
sistemadealimentacióneléctricade3cables,monofásica,conunsistemaocablede
descargaatierraadecuado.
• ParautilizarconbombillasconunabaseE26(mediano)solo.
• Paraevitarelriesgodeincendios,noexcedaelvatajemáximodeunabombilla
de60Wincandescente
,LEDde9W,uorescente(CFL)de13W,
oLEDbalastoincorporadode9W.(Bombillasnoincluidas)
ADVERTENCIAS:
• Parareducirelriesgodeincendio,electrochoqueolesionespersonales:siempreapaguey
desenchufeestalámparaydéjelaenfriarantesdeintentarreemplazarlabombilla.
• Notoquelabombillamientraslalámparaestáencendida.
• Mantengalosmaterialesinamableslejosdelalámpara.
• Nuncamiredirectamenteaunabombillaencendida.
No deseche nada hasta después de haber
terminado de ensamblar para evitar botar por
accidente piezas pequeñas o herramientas.
6
Circuito de alimentación necesario: 120V, 60Hz
1/2 Inch (12.7 mm)
1/2 pulgada (12.7 mm)
1. Pase los cables a través de la placa de
montaje (A).
2. Conecte los cables en forma segura con
conectores para cable, tal como se muestra.
Conecte blanco con blanco, negro con negro
y el cable verde o cobre de descarga a tierra
a la descarga a tierra de la placa de montaje
tal como se muestra.
3. Asegure la placa de montaje (A) al
techo con tornillos largos.
4. Instale la cubierta del techo (B) a la placa de
montaje (A) usando los tornillos cortos.
5. Determine el largo deseado del cable de
la lámpara y asegúrelo con un pequeño
tornillo (C) y un herramienta (D).
6. Instale la bombilla especicada.
ParautilizarconbombillasconunabaseE26
(mediano)solo.NO EXCEDA EL VATAJE
ESPECIFICADO.
A
B
C
D
BLANCO BLANCO
NEGRO NEGRO
VERDE/COBRE VERDE/COBRE
1/2 Inch (12.7 mm)
1/2 Inch (12.7 mm)
1/2 Inch (12.7 mm)
!
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

Hailey Home PD1656 User manual

Brand
Hailey Home
Model
PD1656
Type
User manual

Hailey Home PD1656 is a pendant lamp designed for indoor use in dry locations. It features a simple and elegant design, perfect for adding a modern touch to any room. The lamp is compatible with E26 (medium) base light bulbs and supports a maximum wattage of 60W for incandescent bulbs, 9W for LED bulbs, 13W for fluorescent (CFL) bulbs, or 9W for self-ballasted LED bulbs. (Bulbs not included). Installation requires connecting the wires (white to white, black to black, and green/copper ground wire to the mounting plate ground) and securing the mounting bracket to the ceiling.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents