19
Adjuing the volume
Your hearing inruments automatically adju the volume
to the liening situation.
XIf you prefer manual volume adjument, press the
rocker switch briey.
Refer to section "Controls" for the setting of the
rocker switch.
An optional signal tone can indicate the volume change.
Once the maximum or minimum volume has been
reached, you may hear an optional signal tone.
If you turn o the hearing inruments immediately
after changing the volume, the volume change may
not be saved. Wait 5 seconds before turning the
hearing inruments o.
Changing the hearing program
Depending on the liening situation, your hearing
inruments automatically adju their sound.
Your hearing inruments may also have several hearing
programs which allow you to change the sound, if
needed. An optional signal tone can indicate the program
change.
XTo change the hearing program, press the push button
or the rocker switch.
Refer to section "Controls" for the setting of your
controls. Refer to section "Settings" for a li of your
hearing programs.