Pairing with your Bluetooth phone
1 Enter Pairing mode.
Slide the power switch
with pressing and
holding [
] to turn the headset on. The
indicator light turns on blue and stays lit after
ashing blue, red, and purple twice.
If you turn the headset on for the rst time,
it proceeds into Pairing mode immediately.
2 Search for and connect with your phone according
to your phone user's guide. (Bluetooth PIN: 0000,
4 zeros).
NOTE:
When the headset and the phone are paired, press
[ ]
to reconnect via the previously connected Headset Prole
or Hands-Free Prole, or press [ ] to reconnect via the
Advanced Audio Distribution Prole.
•
•
Using call functions
Some features may not be supported by your phone.
When the headset is waiting for a call,
Press [
] to:
Answer an incoming call
Redial the last number called
Press and hold [
] to:
Make a voice-activated call
Reject an incoming call
When the headset has a call in progress,
Press [
] to:
End a call
Transfer a call from the phone to the headset
End the rst call and answer a second call
•
•
•
•
•
•
•
Press and hold [ ] to:
Place a call on hold
Place the rst call on hold and answer a second call
Retrieve a call on hold
Press [
+] or [-] to adjust the volume.
Press and hold [
+] or [-] to turn the microphone off
or on.
Using music control functions
Press [ ] to:
Listen to music
Pause and resume playback
Press and hold [
] to stop playback.
Press [
] to skip backward or [ ] to skip forward.
Press and hold [
] to scan backward or [ ] to scan
forward in a le.
Press [
+] or [-] to adjust the volume.
•
•
•
•
•
Specications
Item Specications and description
Bluetooth version
2.0
Support prole
Headset Prole, Hands-Free Prole,
Advanced Audio Distribution Prole,
Audio/Video Remote Control Prole
Operating range Up to 30 feet (10 meters)
Standby time Up to 200 hours*
Talk time Up to 9 hours*
Play time Up to 9 hours*
Charging time Approximately 3 hours*
* Depending on the phone type and usage, the actual time may
vary.