Samsung Headphones WEP750, WEP750 User manual

  • Hello! I am an AI chatbot trained to assist you with the Samsung Headphones WEP750 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Headquarters:
1301 East Lookout Drive Richardson,
TX
75082
Internet Address:
http://www.samsungmobileusa.com/
accessories
Customer Care Center:
1-800-SAMSUNG
Guide No.: GH68-xxxxxA
10/2008. Rev. 1.0
Your headset overview
Earpiece
Volume down
button
Charger
jack
Ear hook
Microphone
Volume up
button
Talk button
NOTE:
Make sure you have the following items with your headset :
Charger, User's Guide.
The items supplied with your headset may vary depending on
your region.
NOTE:
Use only a Samsung-approved travel adapter. Unauthorized
adapters may cause an explosion or damage to the
headset.
The battery will gradually wear out while charging or
discharging because it is a consumable part.
The headset is not able to operate while charging. Try
connecting after charging is completed.
Wearing the headset
Place the headset on your ear. Ensure to put the correct
(Left, Right) earpiece on each ear.
Depending on what ear you are going to wear the
headset, simply adjust the ear hook accordingly.
Charging the headset
This headset has a rechargeable internal battery which is
non-removable. Ensure that you fully charge the battery
before using the headset for the rst time.
1
Put the travel adapter into the adapter jack and into a
power outlet.
2 Disconnect the travel adapter from the power outlet
and the headset when the indicator light changes to
blue.
Turning the headset on or off
To turn the headset on, press and hold [ ] until the
indicator light ashes blue 4 times.
To turn the headset off, press and hold [
] until the
indicator light sequentially ashes blue and red.
Pairing with your Bluetooth phone
1 Enter Pairing mode.
If you turn the headset on for the rst time, it
proceeds into Pairing mode immediately.
Make sure that the headset is off, and press and
hold [
] until the indicator light turns on blue and
stays lit after blinking.
2
Search for and connect with your phone according
to your phone user's guide. (Bluetooth PIN: 0000, 4
zeros).
NOTE:
When the headset and the phone are paired, the headset
attempts to reconnect automatically each time it turns on.
Otherwise, press [
] to reconnect.
Using call functions
Some features may not be supported by your phone.
When the headset is idle (in standby mode),
Press
[
] to:
Answer an incoming call
Make a voice-activated call
Press and hold [
] to:
Redial the last number called
Reject an incoming call
When the headset has a call in progress,
Press [
] to:
End a call
Transfer a call from the phone to the headset
End the rst call and answer a second call
Press and hold [
] to:
Place a call on hold
Place the rst call on hold and answer a second call
R
etrieve a call on hold
Press [
+]
or [-] to adjust the volume.
Press and hold [+]
or [-] to turn the microphone off or
on.
Press and hold [+] and [-] to turn the indicator light on
or off.
Specications
Item Specications and description
Bluetooth version 2.0+EDR
Support prole Headset Prole, Hands-Free Prole
Oper
ating range Up to 30 feet (10 meters)
Standby time Up to 150 hours*
Talk time Up to 6 hours*
Charging time Approximately 2 hours*
* Depending on the phone type and usage, the actual time may
vary.
/