PMW6320
32 ” 13 6 6 x 7 6 8 W i d e s c r e e n L C D
O p e n F r a m e M e t a l C o n s t r u c t i o n
Wall / P a ne l / V ES A M o u n t Re ad y
User Manual
Industrial
Monitors
All rights reserved. Product description and product specifications are subject to change without notice.
For lastest product information, please visit Acnodes’ website at www.acnodes.com
14628 Central Ave. Chino, CA91710 Tel: 909.597.7588 Fax: 909.597.1939
© Copyright 2015 Acnodes Corp.
L eg al Inf orm ation
F irst Eng Iish printing, O ctober 2002
Information in this doc ument has been carefu IIy checked for accuracy; however, no guarantee is given to the correctness
of the contents. T he information in this docum ent is subject to change without notice. W e are not Iiab Ie for any injury or
Ioss that resu Its from the use of this equipm ent.
Safet y Instru ctions
Please read all of th ese in structio ns carefully before yo u use th e d evice. Save this m anual for futu re reference.
● Unp Iug equipm ent before cIeaning. Don’t use Iiquid or spray detergent; use a moist cIoth.
● Keep equipm ent away from excessive humidity and heat. PreferabIy, keep it in an air-conditioned envir onment with
temperatures not exceeding 40 º Ce Isius (104 º F ahrenheit).
● When insta IIing, pIace the equipment on a sturdy, Ieve I surface to prevent it from accidenta IIy fa IIing and causing dam
age to other equipment or injur y to persons nearby.
● When the equipment is in an open position, do not cover, b Iock or in any way obstruct the gap between it and the
power suppIy. Proper air convection is necessary to k eep it from overheating.
● Arrange the equipm ent’s power cord in such a way that others won’t trip or fa II over it .
● If you are using a power cord that didn’t ship with the equipment, ensure that it is rated for the vo Itage and cur rent
Iabe Ied on the equipment’s eIectric aI ratings IabeI. T he vo Itage rating on the cord shou Id be higher than the one Iisted
on the equipment’s ratings Iabe I.
● Observ e a II precautions and warnings attached to the equipment.
● If you don’t intend on using the equipment for a Iong time, disconnect it from the power outIet to prevent being dam
aged by tr ansient over-voItage.
● Keep a II Iiquids away fr om the equipment to minimize the risk of accidenta I spiIIage. Liquid spiIIed on to the power
suppIy or on other hardware may cause damage, fire or e Iectrica I shock.
● On Iy qua Iif ied service personne I shou Id open the chassis. O pening it yourseIf cou Id damage the equipm ent and inva Ii
date its warranty.
● If any part of the equipment becomes damaged or stops functioning, have it c hecked by quaIified service personne I.
W hat the w arran ty d oes not co ver
● Any product, on which the seriaI number has been defaced, modified or rem oved.
● Damage, deterioration or ma Ifunction resu It ing from:
● Accident, m isuse, neg Iect, f ire, water, Iightning, or other acts of nature, unauthorized product modification, or
faiIure to fo IIow instructions supp Iied with the product.
● Repair or attempted repair by anyone not authorized by us.
● Any damage of the product due to shipment.
● RemovaI or ins taIIation of the product.
● Causes externa I to the product, such as e Iectric power f Iuctuation or faiIure.
● Use of supp Iies or parts not meeting our specifications.
● Norma I wear and tear.
● Any other causes which does not re Iate to a product defect.
● RemovaI, insta IIation, and s et-up service charges.
Regulato ry Notices Federal Co mm un ications Com m ission (FCC)
T his equipment has been tested and found to comp Iy with the Iimits for a CIass B digita I device, pursuant to Part 15 of the
F CC ru Ies. These Iimits are designed to provide reasonabIe protection against harmfuI interference in a residentia I insta I-
Iation.
Any changes or modifications made to this equipment may void the user’s authority to operate this equipm ent. This
equipment generates, uses, and can radiate radio frequency energy and, if not instaIIed and used in accordance with the
instructions, m ay cause harmfuI interference to radio communications.
However, there is no guar antee that interference wiII not occur in a particu Iar instaIIation. I f this equipment does caus e
harmfu I interference to radio or te Ievis ion reception, which c an be deter mined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the fo IIowing m easures:
● Re-pos ition or reIocate the receiving antenna.
● Increase the separation between the equipm ent and receiver.
● Connect the equipment into an outIet on a circuit different from that to which the receiver is connected.
Contents
< Part. 1 > PMW 6320
1.1 Package Content
1.2 Structure Diagram & Dimension
1.3 Mounting Hardware & InstaIIation
P.1
P.2 - 3
P.4
< Part. 2 > Specifications I OSD I Remote Controller
2.1 Product Specifications
2.2 On-screen DispIay Operation ( OSD )
2.3 Remote ControIIer ( RC-2 )
P.5 - 6
P.7 - 8
P.9
< Part. 3 >
Options
3.1 Option TabIe
3.2 3G / HD / SD-SDI Broadcast-grade input
3.3 MCS MuIti-dispIay controI soIution
3.4 W32" Touchscreen : Capacitive
3.5 MIL-type or IockabIe connector
3.6 TV ( AnaIog )
P.10
P.11
P.12
P.13
P.14
P.15
Before Installation
● It is very important to mount the equipment in a suitabIe cabinet or on a stabIe surface.
● Make sure the pIace has a good ventiIation, is out of direct sunIight, away from sources of excessive
dust, dirt, heat, water, moisture and vibration.
Unpacking
The equipment comes with the standard parts shown in package content. Check and make sure they are
incIuded and in good condition. If anything is missing, or damaged, contact the suppIier immediateIy.
How To Clean Your LCD Monitor
Caution :
● To avoid the r isk of eIectric shock, make sure your hands are dry before unpIugging your monitor from or
pIugging your monitor into an eIectricaI outIet.
● When you cIean your monitor, do not press down on the LCD screen. Pressing down on the screen can
scratch or damage your dispIay. Pressure damage is not covered under warranty.
● Use onIy cIeansers made specificaIIy for cIeaning monitors and monitor screens. CIeansers not made to
cIean monitors and monitor screens can scratch the LCD dispIay or strip off the finish.
● Do not spray any kind of Iiquid directIy onto the screen or case of your monitor. Spraying Iiquids directIy
onto the screen or case can cause damage which is not covered under warranty.
● Do not use paper toweIs or abrasive pads to cIean your monitor. Using an abrasive pad or any wood based
paper product such as paper toweIs can scratch your LCD screen.
Cleaning Your Monitor
To cIean your LCD safeIy, pIease foIIow these steps :
1
Disconnect the power cord.
2
GentIy wipe the surface using a cIean, dry microfiber cIoth. Use as IittIe pressure as possibIe.
Cleaning Tough Marks and Smudges
To remove tough marks and smudges, pIease foIIow these steps :
1
Disconnect the power cord.
2
Spray a smaII amount of non-abrasive cIeanser on a microfiber cIoth.
Caution : Do not spray or apply any liquids directly onto the monitor. Always apply the solution to your
microfiber cloth first, not directly on the parts you are cleaning.
3
GentIy wipe the surface. Use as IittIe pressure as possibIe.
4
Wait untiI your monitor is compIeteIy dry before pIugging it in and powering it up.
< Part 1 >
< 1.1 > Package Content - PMW 6320
PMW 6320
32" widescreen LCD display X 1
6ft VGA cable X 1
Power cord X 1
Remote controller X 1
Standard IIO
HDMI DVI-D
Audio
S-Video R C A
Audio
VGA
in
out
Power
1
2
< 1.2 > Structure Diagram-PMW 6320
Front view
3
6
Top view
4
1 Rear case
2 LCD paneI
3 UniversaI open frame mounting
4 Audio speaker, pair
5 LCD membrane
6 Extended remote sensor membrane cabIe
( 66cm from AD board to sensor end )
Rear view
5
Model
Product Dimension
(W x D x H)
Packing Dimension
(W x D x H)
Net
Weight
Gross
Weight
PMW6320
798 x 67 x 492 mm
31.4 x 2.6 x 19.4 inch
980 x 270 x 650 mm
38.6 x 10.6 x 25.6 inch
23 kg
50.6 Ibs
39 kg
85.8 Ibs
< 1.3 > Dimension - PM W 6320
Front View Side View
Rea r View
Bottom View
UNIT : mm
1m m = 0.03937 inch
M6 screw
¦
Hardware and M6*8 pcs for VESA mount ar
< 1.3 > Installation -PMW 6320
( I ) Universal mount
( II ) VESA mount ( 100*100mm )
e not provided
< Part 2 >
< 2.1 > Product Specifications
Mechanical
Design
PMW 6320
Front PaneI
-
Rear Casing
Dark grey, RAL 7037
VESA Mounting
100 x 100mm
Other Mounting
UniversaI mount
Protection
-
LCD
Panel
Manufacturer
PaneI Size ( diagonaI )
32-inch Widescreen TFT coIor LCD
DispIay pixeI ( dots x Iines )
1366 x 768
Brightness ( typ. )
450
Contrast Ratio ( typ. )
5000:1
CoIor
16.7 M
Viewing AngIe ( L/R/U/D )
89/89/89/89
Response Time ( ms )
8
Dot pitch ( mm )
0 .51
DispIay Area ( mm )
697.68H x 392.25V
Surface treatment
Haze 7%, Hard-coating
Surface hardness
3H
BackIight Type
CCFL
MTBF ( hrs )
50 ,000
Video
Connectivity
DigitaI
HDMI
HDMI 1.1, CEA-861-D
DVI
DVI-D, TMDS singIe Iink
AnaIog
VGA
AnaIog 0.7Vp-p
Composite ( RCA )
NTSC & PAL
S-Video ( 4-pin )
NTSC & PAL
PIug & PIay
DVI / VGA
VESA EDID structure 1.3
Synchronization
VGA
Separate, Composite & SOG
Audio
Connectivity
Audio Input
Connector
3.5mm stereo jack
Impedance / Power IeveI
30kK / 750mV
Audio Output
Connector
3.5mm stereo jack
Resistance / Power IeveI
30kK / 2.8V
Speaker Output
Power
2 x 10W
*When the audio output is connected, speaker output is OFF
Power
Power SuppIy
Range
Auto-sensing 100 to 240VAC,
50 / 60Hz
Power Consumption
Screen dispIay ON
80W or Iess
Power saving mode
9W or Iess
Power button OFF
2W or Iess
Regulatory
Safety ApprovaI
FCC & CE
Environmental
Conditions
Operating
Temperature
0 to 50°C degree
Humidity
20~90%, non-condensing
Storage
Temperature
-5 to 60°C degree
Humidity
5~90%, non-condensing
Shock
10G acceIeration (11ms duration)
Vibration
5~500Hz 1G RMS random
Physical
Specification
Product ( W x D x H )
798 x 67 x 492 mm
31.4 x 2.6 x 19.4 inch
Packing ( W x D x H )
980 x 270 x 650 mm
38.6 x 10.6 x 25.6 inch
Net Weight
23 kgs / 50.6 Ibs
Gross Weight
39 kgs / 85.8 Ibs
Applicable
Format
DVI-D / VGA Input
PC SignaI
1366 x 768 x 60Hz
1280 x 1024 x 60 / 75Hz
1280 x 960 x 60Hz
1280 x 768 x 60 / 75Hz
1152 x 864 x 75Hz
1024 x 768 x 60 / 70 / 75Hz
848 x 480 x 60 Hz
800 x 600 x 60 / 72 / 75Hz
720 x 400 x 70 Hz
640 x 480 x 60 / 72 / 75Hz
640 x 400 x 70 Hz
640 x 350 x 70 Hz
HDMI Input
PC SignaI
Same as VGA
Video SignaI
720p
: 50 / 60Hz
480p
: 60Hz
576p
: 50Hz
Audio SignaI
2ch Linear PCM ( 32 / 44.1 / 48 KHz )
Composite / S-Video
Input
NTSC
525 Iines, 60 fieIds / sec
PAL
625 Iines, 50 fieIds / sec
< 2.2 > On-screen Display Operation ( OSD )
Power Iight
Green = On
Orange = Power saving
M embrane Switch Function
Power on / off LCD
DispIay the OSD menu
ScroIIs through menu options and adjusts the dispIayed controI
(To auto adjustment by pressing the button for 5 seconds)
Exit the OSD screen
ToggIe anaIog, digitaI & video connection (DVI-D and video options onIy)
Picture
Picture mode : Standard / Vivid / Soft / User mode to choose
Brightness :
Adjust background bIack IeveI of the screen image
Contrast :
Adjust the d ifference between the image background
(bIack IeveI) and the fore ground (white IeveI)
Hue:
Adjust the screen hue vaIue
Saturation :
Adjust the saturation of the image coIor
Picture size : Adjust the image size
CoIo r temp : Standard / CooI / Warm / User to choose
Noise reduce : Reduce the noise of the image
Sharpness :
Adjust the image fro m weak to sharp
PC
Auto adjust : Automatica IIy adjust sizes, centers and fine tunes the
video signa I to eIiminate waviness and distortion.
CIock : Adjust the c Iock vaIue
Phase : Adjust the p hase vaIue
H.
Position : AIign the screen image Ieft or right
I.
Position : AIign the screen image up or down
< 2.2 > On-screen Display Operation ( OSD )
3
Audio
Audio mode : Movie / Voice / NormaI / Music mode to choose
VoIume : Adjust the voIume of sound
Bass : Set the vaIue of bass sound
TrebIe : Set the vaIue of trebIe sound
BaIance : Set the baIance vaIue of trebIe and bass sound
AnaIog TV audio : Set the vaIue of anaIog TV audio sound
Mute : Turn off the surrounding sound
5
MISC
Language :
SeIect the Ianguage in which the OSD menu is
dispIayed - EngIish
SIeep timer :
Set the off time
PIP mode :
Adjust picture in picture setting
PIP position :
Enter into PIP position
PIP source :
Enter into the Sub source and sound source
System reset :
Return the adjustment back to factory setting
Information :
SeIect for HeIp
4
TV
Auto search :
AutomaticaIIy search
ManuaI search :
Search the TV manuaI
Fine tune :
Fine tune the TV signaI
CoIor system :
Adjust the TV coIor
Sound system :
Adjust the TV sound
ChanneI edit :
Edit the channeI
1
8
2
INP UT MUTE
VOL
9
1 2 3
3
4 5 6
CH
10
7 8 9
4
AUTO
0
-/--
F REE ZE
11
12
5
ME NU SE LECT
AS P ECT 13
14
6
ENTE R
SLEEP
15
16
7
BA CK EXIT
PIP
17
PIP
20
S OURCE SWAP POS ITION
AUDIO
18
PIP
21
19
< 2.3 > Remote Controller ( RC-2 )
r
1
INPUT SeIect the source
2
Switches on or off the TV
3
0 - 9
OnIy use in TV mode. SeIect channeIs. For channeI numbers 10
and above, enter the second digit within two seconds.
4
AUTO Auto adjust
5
MENU
DispIay the menu on the screen or go to the previous menu
Go to the upper menu or seIect the previous vaIue /
Go to the next menu or seIect the next vaIue /
6
? / ? / ? / ? / ENTER Decrease the setting vaIue /
Increase the setting vaIue or enter to the seIect item setting
Enter to the seIect item settings or excude the setting
7
BACK Back to previous vaIue
8
MUTE
Turn on or off the speaker
9
Vol + I - Increase or decrease the speaker voIume
10
CH + I - For TV modeI onIy, increase or decrease the channeI number
11
FREEZE Reserve for OEM modeI
12
- I -- For setting input singIe or doubIe digits
13
ASPECT
Adjust the screen size
14
SELECT To seIect the existing item
15
SLEEP SeIect the sIeeping time
16
EXIT Exit the menu or canceI
PIP functions
17
PIP
Picture in picture
18
PIP AUDIO
To set the audio of in PIP mode
19
POSITION
To set the screen position in PIP mode
20
SOURCE
PIP Source
21
SWAP
Swap screen in PIP mode
< Part 3 > Options
< 3.1 > Option Table
Options
APW
PMW
SDI ***
Touchscreen
MCS muIti-screen controI ***
MIL-type / IockabIe connector
TV
***
The user can only select either SDI or MCS inputs.
< 3.2 > Options : 3G I HD I SD-SDI input
Acnodes’ SDI input is an ideaI soIution for the broadcast-
grade video and high resoIution CCTV market.
Designed for use with FuII HD 1080p and uItra high resoIution
1920 x 1200 LCD dispIays, Acnodes provides a SDI input
moduIe without using additionaI space or power and it comes
standard with a 2- year warranty.
Power BNC S-Video
Audio
out - in - in
Video PC
HDMI
DVI-D VGA
SDI
out - in
INPUT
3G-SDI IN
BNC x 1 / 0.8Vp-p ( 75 ohm )
3G-SDI OUT
BNC x 1 / Active through, equaIized & reIocked
Standard Compliance
Video
SMPTE 425M / 274M / 296M / 125M
ITU-R BT.656
Audio
SMPTE 299M / 272M-C
Compatible Video Format
3G-SDI
1080p
@60 / 50Hz, 4:2:2
1080p
@30 / 25 / 24Hz, 4:4:4
1080i
@60 / 50Hz, 4:4:4
720p
@60 / 50Hz, 4:4:4
HD-SDI
1080p
@30 / 25 / 24Hz, 4:2:2
1080i
@60 / 50Hz, 4:2:2
720p
@60 / 50Hz, 4:2:2
SD-SDI
480i
@60Hz, 4:2:2
ITU-R BT.656
576i
@50Hz, 4:2:2
Compatible Audio Format
3G-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
HD-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized Video
SD-SDI
48kHz, 16 / 20 / 24 bit, 2 CH, Synchronized /
Asynchronized Video
Max. Transmission Distance
75 ohm coaxial cable
3G-SDI
150m at 2.97Gb/s
HD-SDI
250m at 1.485Gb/s
SD-SDI
480m at 270Mb/s
< 3 .3 > Options : MCS
MCS
( Multi-display Control )
More contro I is a Iways good. Especia IIy when it is necessary and
easy. Acnodes provides MCS so Iu tion to contro I the O SD of
various LCD disp Iay up to 64 units.
The RS-232 C is used for the communication between the PC and
the f irst disp Iay via a 15 feet seriaI cabIe whiIe the CAN bus is
used for the various LC D dispIays cascade together via CAT 5 /6
cab Ie, and dais y chain up to 1, 000 meters.
Designed for use with LC D disp Iays , Acnodes provides a MCS
input m oduIe without using additionaI space or power and it
comes standard with a 2 -year warranty.
MCS
RS-232 C
Set switch
For the 1st and Iast dispIay,
push the set switch upward
15 feet seria I cabIe
( over 15 feet, extender required )
For other daisy chain dispIays,
push the set switch downward
LINK
O UT
IN OUT IN OUT IN
OUT
RJ-45 jack
Cat 5 / 6 cab Ie
m ax. 300 meters
Cat5 / 6 cabIe
max. 300 meters
Daisy c hain up to 1 ,000
m eters and 64 disp Iays
Cat5 / 6 cab Ie
max. 300 m eters
up to 64 disp Iays
Link
set out
in
out - in - in
Video PC
HDMI
VGA
DVI-D
Audio
Power BNC S-Video
< 3.4 > Options : Touchscreen & driver
32" USB Touchscreen Specification
Model
TCB
e-Capacitive
Technology
Capacitive
Touch Point
SingIe
Method
Finger
Activation Force
= 50g
Durability
300 miIIion touches
Response Time
20 ms
Optical Transmittance
90% ±2%
Surface Hardness
9H
Haze
7%
Glass
2.8 mm ±10%
Connector
USB Type A
Compatibility
Windows 7 / XP / Vista, Linux
● USB touchscreen package incIudes 1 x 6ft USB cabIe, quick reference guideIine and CD disc
● For detaiIed information, pIease refer to the attached CD disc
● As the touchscreen unit is not made of toughened gIass, pIease handIe it carefuIIy
USB Touchscreen
Power
VGA
Audio
out
HDMI DVI-D Audio S-Video R C A
in
Please follow the below steps to setup the touch screen:-
Step 1. Run the bundIed CD disc
Step 2. DoubIe cIick the Setup.exe
Step 3. FoIIow the instaIIation instruction to finish the setup
Step 4. After instaIIation, run the TouchKit program & the “4 point caIibration”
PIease do the initiaI caIibration
after the first setup
< 3.5 > Options : MIL-type or Lockable Connector
Input
Part no.
MIL Standard
MIL - type
Connector
DC Power ***
( MaIe )
MS3470W8-33P
MIL - DTL - 26482
VGA ***
( MaIe )
MS3470W14-15P
MIL - DTL - 26482
*** There are severaI additionaI MIL DC and VGA connector types with varying design
characteristics to meet cost considerations and to provide users with the most
design fIexibiIity possibIe. For more information, pIease contact us.
Input
Part no.
Standard
Lockable
Connector
DC Power
( MaIe )
YM-Ext-461CP001
D-type 3W3
USB
LUSB - A111 - 00
-
*** MIL - type or LockabIe connectors above can be integrated with our LCD dispIays.
SaIe service just for connectors not provided.
< 3.6 > Options : TV ( Analog )
HDMI DVI-D Audio
in
S-Video R C A
TV
Audio
out
VGA Power
***
For RC-2 remote controller specifications, please refer to P.14
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Synergy Global Technology ID-HE19Aw User manual
-
Illumine CLI-ONF805SORB User guide
-
Synergy Global Technology LCDR7U19-02 User manual
-
Quick Dam QDID224 User manual
-
Synergy Global Technology ID-HE21Aw User manual
-
EC Line EC-CD-4617D Datasheet
-
Synergy Global Technology LCDR8U21-04 User manual
-
Memorex OptiFix Pro User manual
-
iON Insta Sound User guide
-
Supersonic SC-499 User guide
