3M Imprint™ II VPS Impression Material User guide

ONE-STEP/TWO VISCOSITY TECHNIQUE

Imprint

™

II Garant

™

Quick Step Heavy Body/Light Body

Impression Material System

1 of 1

3M ESPE Customer Hotline 1-800-634-2249

Please refer to instructions for more detailed information 70-2009-2456-4

as well as precautionary and warranty information. 44-0023-3751-5

Syringe light body impression material

around the clean, dry tooth preparation(s)

using either Imprint II Garant Quick Step

Light Body (A) or Imprint II Garant Quick

Step Regular Body (B) Viscosity Wash.

Intraoral Working Time: 40 seconds

Fill the tray with Imprint II Garant Quick

Step heavy body material while the light

body material is being syringed on the

preparation.

Slowly seat the tray in the mouth. The

tray must be seated within 40 seconds

of the start of oral syringing and within

1:15 minutes of the start of tray filling.

Have patient bite down into centric

occlusion. Oral Setting Time: 2:30

minutes

Remove the impression, rinse, dry and

disinfect. The stone model may be

poured after 2 hours.