1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
Custom Drawer Base Utility Stand models 12000
Description:
Drawer base utility stand with 16 gauge reinforced stainless top,
and integral backsplash with 45˚ return. Self-closing dry storage
drawers on 16 gauge tracks with 1 5/8" stainless bearings and
removable plastic pans. 6" high adjustable and movable legs.
Standard Features:
• Available under one piece top with other modular
equipment up to 16' in length
• 6" high legs—adjustable and movable
• Removable plastic pan(s) supplied for each self-closing
drawer
• 45˚ integral stainless backsplash is standard.
90˚ stainless backsplash is optional.
Specifications:
UNIT TOP: Top to be one piece of die formed 16 gauge stainless
steel with 2 1/2" nosing. Backsplash to be coved cornered,
with 45˚ return at top and overall height of 6 3/4". Ends at top
fitted with recessed heavy duty steel bars for field bolting units
together, producing a hairline seam. Top reinforced with (2) full
length channel braces.
UNIT BODY: Body ends to be die formed stainless steel, finished
and polished on the inside, with corrosion resistant exterior. Shelf
to be 22 gauge stainless steel with marine edge at front, 6 5/8"
removable coved cornered turn up at rear, and integrally welded
channel bracing. Dry storage drawer(s) are located below shelf.
Drawer pans are plastic, removable without tools, with drawer
track of 16 gauge stainless steel with 1 5/8" stainless steel
bearings, self-closing. Drawer front of 22 gauge stainless steel.
Drawer track, pan(s) and front assembly contained in 20 gauge
stainless steel housing. Legs to be 6" high stainless steel with
adjustable bullet foot. Legs mounted to full length channel frame
assembly which is integrally welded to bottom of body assembly.
Legs can be moved left to right to avoid floor obstacles during
installation.
NOTE: Multiple units may be built under a common top to get to
longer lengths.
Shown with optional finished end.
Randell Custom, Page 2
PP SPEC0117 Rev. A
Revised 07/07
model 12318 12324 12336 12348 12360 12372
Options & Accessories:
Additional drawers
Urn trough
Depth modification
Casters
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.
12000 Series
ABS DRAWER PANS
Drawer Size Removable Pan Size
A 18" 11" x 16" x 6"
B 24" 16" x 16" x 6"
29" Deep Equipment
Length 18" 24" 36" 48" 60" 72" 84" 96"
Height* 36" 36" 36" 36" 36" 36" 36" 36"
Drawers (1) 18" (1) 24" (2) 18" (2) 24" (2) 18" (1) 24" (3) 24" (2) 18" (2) 24" (4) 24"
Ship Wt. 152 lbs. 180 lbs. 236 lbs. 285 lbs. 334 lbs. 384 lbs. 427 lbs. 467 lbs.
33" Deep Equipment
Length 18" 24" 36" 48" 60" 72" 84" 96"
Model No. 12318 12324 12336 12348 12360 12372 12384 12396
Height* 36" 36" 36" 36" 36" 36" 36" 36"
Drawers (1) 18" (1) 24" (2) 18" (2) 24" (2) 18" (1) 24" (3) 24" (2) 18" (2) 24" (4) 24"
Ship Wt. 152 lbs. 180 lbs. 236 lbs. 285 lbs. 334 lbs. 384 lbs. 427 lbs. 467 lbs.
33"
36"
42.75"
B
24" DRY
OPEN STORAGE
B
24" DRY
B
24" DRY
72"
AA
B
24" DRY
OPEN STORAGE
18" DRY 18" DRY
60"
BB
24" DRY
OPEN STORAGE
24" DRY
48"
OPEN STORAGE
18" DRY
AA
18" DRY
36"
B
24" DRY
STORAGE
OPEN
24"
A
18" DRY
STORAGE
OPEN
18"
SECTION VIEW
/
