1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
Custom Remote Refrigerated Chef Stand models 24000
Description:
Remote, CFC free, refrigerated cooking equipment stand with
reinforced stainless steel equipment shelf. Integral backsplash
with 45˚ return. Refrigerated drawers on 16 gauge stainless
steel tracks with 1 5/8" stainless steel bearings and removable
plastic pan. 6" high adjustable legs. R-134a cooling system
with evaporator blower coil and expansion valve supplied and
installed.
Shown with optional finished end.
Standard Features:
• Available under one piece top with other modular equipment up
to 16' in length
• 6" high legs—adjustable and movable
• 10 3/8" wide x 1 1/4" thick laminated maple work board
• Self-closing drawers with removable plastic pan
• Evaporator blower coil with expansion valve, solenoid valve,
thermostat, and refrigeration lines provided and installed,
R-134a refrigerant, CFC free
• If unit is tted with vent, then backsplash will be 3" thick to
meet NFPA 96
• 45˚ integral stainless backsplash is standard. 90˚ stainless
steel backsplash is optional.
• Equipment Rails are optional
Specifications:
EQUIPMENT SHELF: Equipment shelf to be one piece of die-
formed stainless steel with 2" nosing and marine edge. Shelf is
reinforced with welded channel brace assembly.
UNIT BODY: Body ends to be die-formed stainless steel, nished
and polished on the inside, with corrosion resistant exterior. Ends
at top fitted with recessed heavy duty steel bars for splining units
together, producing a hairline seam. Backsplash to be coved
cornered, with 45˚ return at top and overall height of 6 3/4". (If
fitted with vent system, standard backsplash to be omitted and
unit tted with 3" thick backsplash to meet NFPA 96). 10 3/8"
wide x 1 1/4" thick laminated maple cutting board provided with
removable supports. Base interior to be ABS thermoplastic at
ends only. Stainless steel interior liner to be coved cornered to
form bottom, back and top. Unit insulated with CFC free, high
density polyurethane expanding foam. Units totally prewired to
junction box. Legs to be 6" high stainless steel, with adjustable
bullet foot. Legs mounted to full length channel frame assembly
which is integrally welded to bottom of assembly. Legs can be
moved left to right to avoid floor obstacles during installation.
DRAWERS: Remote refrigerated drawers are located below
equipment shelf. Drawer liners are plastic, removable without
tools, with drawer tracks of 16 gauge stainless steel with 1 5/8"
stainless steel bearings, self-closing. Drawer opening frame to be
ABS and contain magnetic strip for positive sealing of gaskets.
Drawer fronts to be 22 gauge stainless steel with 16 gauge
stainless steel handles, magnetic gaskets, and plastic pan.
REFRIGERATION: Interior tted with Randell R-134a evaporator
blower coil for cooling base. Expansion valve, solenoid valve,
thermostat, and refrigeration lines provided and installed for
connection at unit rear. Condensing unit and controls not
provided. Units totally prewired to junction box.
Randell Custom, Page 7
PP SPEC0122 Rev. A
Revised 08/07
model 24348 24366 24378 24384 24396 243102 243114
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.
29" Deep Equipment
Length 48" 66" 78" 84" 96" 102" 114"
Height* 36" 36" 36" 36" 36" 36" 36"
Drawers
(1) 18" (1) 24"
(2) 18" (1) 24"
(3) 24" (3) 24"
(2) 18" (2) 24"
(1) 18" (3) 24"
(3) 18" (2) 24"
H.P. 1/4 1/4 1/4 1/3 1/3 1/3 1/3
BTUs 1250 1250 1250 2500 2500 2500 2500
Volts 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
Amps 2.5 2.5 2.5 3 3 3 3
NEMA 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P
Ship Wt. 367 lbs. 452 lbs. 480 lbs. 516 lbs. 570 lbs. 634 lbs. 655 lbs.
33" Deep Equipment
Length 48" 66" 78" 84" 96" 102" 114"
Model No. 25348 25366 25378 25384 25396 25602 25614
Height* 36" 36" 36" 36" 36" 36" 36"
Drawers
(1) 18" (1) 24"
(2) 18" (1) 24"
(3) 24" (3) 24"
(2) 18" (2) 24"
(1) 18" (3) 24"
(3) 18" (2) 24"
H.P. 1/4 1/4 1/4 1/3 1/3 1/3 1/3
BTUs 1250 1250 1250 2500 2500 2500 2500
Volts 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
Amps 2.5 2.5 2.5 3 3 3 3
NEMA 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P
Ship Wt. 367 lbs. 452 lbs. 480 lbs. 516 lbs. 570 lbs. 634 lbs. 655 lbs.
24000 Series
• Equipment shelf depth is 25" deep on 29" deep equipment.
• Equipment shelf depth is 29" deep on 33" deep equipment.
• Inside clearance = total unit length less 3"
* All models with adjustable and movable legs for 35 1/2" to 36 3/4" work height.
ABS DRAWER PANS
Drawer Size Removable Pan Size
18" 11" x 16" x 6"
24" 16" x 16" x 6"
JUNCTION BOX 6 1/2 " AFF.
R134A STD. REFRIGERANT
(SPECIFY IF OTHERWISE)
1/4" LIQUID, 3/8" SUCTION
CONDENSATE DRAIN 1/2
120V-60Hz-1Ph-50W
AFF. = ABOVE FIXED FLOOR
PVC 8 1/2 " AFF.
FAN MOTOR(S)
LINE 8 1/2 " AFF
1250 or 2500 BTU'S
OC
J
OR
LEGEND
L
L
J
OC
OR
27"
REFRIG.24" REFRIG. REFRIG.
18" 18"
REFRIG.
18"
EACH DRAWER SUPPLIED
W/(1) 12" x 20" PAN
24" REFRIG.
114"
112.5"
EACH DRAWER SUPPLIED
24" REFRIG. 24" REFRIG.
REFRIG.
18"
W/(1) 12" x 20" PAN
24" REFRIG.
102"
99"
18"
REFRIG.
EACH DRAWER SUPPLIED
W/(1) 12" x 20" PAN
24" REFRIG. REFRIG.
18"
24" REFRIG.
93"
96"
24" REFRIG. 24" REFRIG.
24" REFRIG.
EACH DRAWER SUPPLIED
W/(1) 12" x 20" PAN
84"
81"
24" REFRIG24" REFRIG 24" REFRIG
EACH DRAWER SUPPLIED
W/(1) 12" x 20" PAN
78"
75"
24" REFRIG
EACH DRAWER SUPPLIED
W/(1) 12" x 20" PAN
18" REFRIG18" REFRIG
66"
63"
48" X 10" X 1 1/4 "
MAPLE WORK BOARD
W/(1) 12" x 20" PAN
EACH DRAWER SUPPLIED
18" REFRIG.24" REFRIG.
48"
45"
66" X 10" X 1 1/4 "
MAPLE WORK BOARD
78" X 10" X 1 1/4 "
MAPLE WORK BOARD
84" X 10" X 1 1/4 "
MAPLE WORK BOARD
102" X 10" X 1 1/4 "
MAPLE WORK BOARD
114" X 10" X 1 1/4 "
MAPLE WORK BOARD
96" X 10" X 1 1/4 "
MAPLE WORK BOARD
Component
SECTION VIEW
-
1
-
2
