Randell 51355LPPO Datasheet

Brand: Randell

Model: 51355LPPO

Type: Datasheet

1055 Mendell Davis Drive, Jackson, MS 39272

888-994-7636, uniﬁedbrands.net

Please reference our website for the most

updated product information and speciﬁcations.

Custom SC Refrigerated Storage models 51000LPPO

Description:

Self-Contained drawer base refrigerator storage units with mechanically

cooled pan opening. These units are offered in variety of lengths to meet

your speciﬁc base storage or pan storage requirements. The mechanically

cooled pan opening uses Randell’s exclusive design technologies, such as

our Exclusive Refrigerated Pan Opening Thermostat allowing customers

to make adjustments to the opening temperatures (independent of the

base). Automatic hot gas evaporator is provided for eliminating the base

coil’s condensation. The base is designed with a “low-proﬁle” cabinet and

is supplied with a plate shelf above the refrigerated openings.

These units feature our Patented Drawer Cartridge Assembly.

A fully welded, unitized drawer cartridge assembly with a quick release

that allows the refrigerated drawers to be easily removed for cleaning.

This equipment is intended for use in rooms having an ambient tem-

perature of 86˚F (30˚C) or less.

model 51375LPPO shown with:

•optional nished end

•pan covers removed

•standard backsplash removed

CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge

stainless steel with 2 1/2" nosing. Backsplash to be coved cornered,

with 45˚ return at top and overall height of 6 3/4". Ends at top ﬁtted with

recessed heavy duty steel bars for ﬁeld bolting units together, producing

a hairline seam. Hinged louver panel to be stainless steel. Exterior body

to be corrosion resistant steel. Door opening frames are ABS and contain

magnetic strip for positive seal of door gaskets. Work surface to be at

36" work height. Legs to be 6" high stainless steel with adjustable

bullet foot. Legs mounted to full length channel frame assembly which

is integrally welded to bottom of body assembly. Legs can be moved left

to right to avoid ﬂoor obstacles during installation.

CABINET INTERIOR: Base interior to be ABS thermoplastic at ends only.

Stainless steel interior liner to be coved cornered to form bottom, back

and top. One baked enamel ﬁnished shelf provided behind each door.

Unit insulation to be CFC free foamed in place urethane.

REFRIGERATED DRAWERS: Fully welded, unitized drawer cartridge

assembly - patented. Heavy duty full extension 14 gauge drawer tracks

on 1 5/8" heavy duty stainless steel bearings. Will accommodate (2)

12" x 20" x 4" deep pans per drawer (pans not included). Quick release

allows drawers to be easily removed for cleaning. Stainless fronts,

mounted to drawer cartridge assembly with easy to grasp drawer

handles. Drawers are self-closing with press ﬁt magnetic gaskets -

(designed for installation & removal without tools).

REFRIGERATION: System is a balanced heavy duty R-404A refrigerant

system with an energy efﬁcient automatic defrost (for base evaporator

coil). The base is cooled by an independent blower coiled operating on its

own expansion valve and thermostat and operates through a dedicated

solenoid valve. A pressure control is provided to operate the condensing

unit on demand. The pan opening is provided with its own thermostat

(located in the compressor housing) making it easily adjustable for speciﬁc

ambient conditions without effecting the balance of the system. An on/off

switch for the pan opening is located above the louver panel.

Standard Features:

• “Low-prole” refrigerated cabinet with plate shelf above

• Low prole 2" recess pan design provides easy reach and

optimal pan temperatures & reliability

• Balanced (extra) high capacity refrigeration system with expansion valve

metering-able to handle peak period demands

• Full Length Poly Cutting Board

• Front breathing compressor housing with directed air ow-Randell Exclusive

• Patented Drawer Cartridge System with easy maintenance Press-Fit gaskets

- A Randell Exclusive

• Pan opening thermostat- A Randell Exclusive

• Drain in pan opening for easy cleaning

• Hinged louver for easy access

• Hinged removable stainless steel covers

• Automatic base defrost with condensate evaporator

• Foamed in place urethane insulation providing superior insulation

and durability

• 6" high adjustable legs, moveable left to right if needed

• Available up to 16' under one common assembly

• Adapter bars are standard to accommodate a compliment of 1/6 size pans

• Front breathing louver design allows sealing to wall & curb

mounting without special requirements

Specifications:

Options & Accessories:

Hinged slide-back removable covers

Lift-Off (removable) night covers

Stainless Steel Ends

Stainless Steel Back

Laminate fronts, ends and back options

Casters in lieu of legs

Export voltages

Wide pan opening

Randell Custom, Page 17a

PP SPEC0132 Rev. B

Revised 5/09

model 51342LPPO 51350LPPO 51355LPPO 51367LPPO 51372LPPO 51375LPPO

51380LPPO 51385LPPO 51397LPPO

33°F to 40°F 18°F to 22°F33°F to 41°F

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, uniﬁedbrands.net

trademarks in the United States [and various other countries] of Uniﬁed Brands, a

wholly-owned subsidiary of Dover Corporation.

5100OLPP0 Series

51000LPPO SERIES (compressor left) SELF-CONTAINED DRAWER BASE REFRIGERATORS WITH STANDARD DEPTH RECESSED PAN OPENING

Length

42" 50" 55" 67" 72" 75"

80" 85" 97"

Model 33" deep 51342LPPO 51350LPPO 51355LPPO 51367LPPO 51372LPPO 51375LPPO 51380LPPO 51385LPPO 51397LPPO

# of sets of (1) set 19" (1) set 27" (1) set 32" (1) set 19" (1) set 19" (2) sets 27" (1) set 27" (2) sets 32" (1) set 19"

drawers

+ 5" mullion + 5" mullion + 5" mullion (1) set 27" (1) set 32" + 3" mullion (1) set 32" + 3" mullion (2) sets 27"

+ 3" mullion + 3" mullion + (2) 3" mullion

Total # of 12x12 (2) 12x20’s (4) 12x20’s (4) 12x20’s (6) 12x20’s (6) 12x20’s (8) 12x20’s (8) 12x20’s (8) 12x20’s (10) 12x20’s

pans in drawer*

Min. Compr. Hsg. 18" 18" 18" 18" 18" 18" 18" 18" 18"

Min. # Pans (6) 1/6 (6) 1/6 (6) 1/6 (6) 1/6 (8) 1/6 (6) 1/6 (10) 1/6 (10) 1/6 (10) 1/6

Min. Length 27” 27” 27” 27” 34” 41” 41” 41” 41”

(clear) of opening

Max. # Pans (10) 1/6 (12) 1/6” (12) 1/6” (16) 1/6” (16) 1/6” (16) 1/6” (18) 1/6” (20) 1/6” (24) 1/6”

Cutting Bd. Width 10" wide 10" wide 10" wide 10" wide 10" wide 10" wide 10" wide 10" wide 10" wide

H.P./Refrigerant 1/3hp/404a

1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/2hp/404a 1/2hp/404a 1/2hp/404a 1/2hp/404a

Volt/Cycle/Phase 115/60/1

115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1

Amps 9.0 9.0 9.0 9.0 12.0 12.0 12.0 12.0 12.0

NEMA 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P 5-15P

Ship Wt. - lbs. 460 496 545 617 672 687 708 726 844

BTU Design load 294/267 353/337 412/381 529/552 529/596 588/622 588/666 647/710 764/881

opening

(-10)/Base (+20)

BTU Design load 1109/2141 1201/2141 1283/2141 1423/2141 1759/3319 1866/3319 1866/3319 1966/3319 2151/3319

opening/base

NOTE: Pan capacity reected is the actual amount of pans that are clearly accessible by the operator. Units with multiple covers may

actually have additional pan capacity that is partially obstructed by the cover divider/mullion.

BTU based on 86F ambient.

*Pans not provided.

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, uniﬁedbrands.net

trademarks in the United States [and various other countries] of Uniﬁed Brands, a

wholly-owned subsidiary of Dover Corporation.

51000LPPO Series

JUNCTION BOX 26" AFF

115V/60Hz/1Ph

9' LONG CORD SET

CONDENSATE DRAIN 1/2"

I.D. VINYL TUBING

(NEMA 5-15P)

MODEL # 51000LPPO

HP COMPRESSOR

LEGEND FOR

AFF = ABOVE FINISHED FLOOR

19"REFRIG.

27" REFRIG.

19"REFRIG.

67"

(PANS NOT PROVIDED)

27" REFRIG.

PLATE SHELF

75" X 10" X .50"

POLY CUTTING BOARD

4"DP

12x20

4"DP

12x20

4"DP

12x20

4"DP

BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER

(PANS BY OTHERS)

75"

25"

32" REFRIG.

(PANS NOT PROVIDED)

PLATE SHELF

72" X 10" X .50"

POLY CUTTING BOARD

4"DP

12x20

4"DP

(PANS NOT PROVIDED)

4"DP

12x20

BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER

(PANS BY OTHERS)

72"

17.75"

25"

(PANS NOT PROVIDED)

PLATE SHELF

(PANS NOT PROVIDED)

4"DP

12x20

4"DP

67" X 10" X .50"

POLY CUTTING BOARD

12x20

BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER

(PANS BY OTHERS)

17.75"

25"

42.75"

36"

33"

(PANS NOT PROVIDED)

32" REFRIG.

PLATE SHELF

4"DP

12x2012x20

4"DP

55" X 10" X .50"

POLY CUTTING BOARD

BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER

(PANS BY OTHERS)

55"

25"

(PANS NOT PROVIDED)

27" REFRIG.

PLATE SHELF

4"DP

12x20

50" X 10" X .50"

POLY CUTTING BOARD

12x20

BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER

(PANS BY OTHERS)

50"

25"

19"REFRIG.

PLATE SHELF

42" X 10" X .50"

POLY CUTTING BOARD

12x20

4"DP

(PANS NOT PROVIDED)

BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER

(PANS BY OTHERS)

COMPR. HSG.

42"

17.75"

18"

Page 17b

1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, uniﬁedbrands.net

trademarks in the United States [and various other countries] of Uniﬁed Brands, a

wholly-owned subsidiary of Dover Corporation.

51000LPPO Series

PLATE SHELF

48.5" X 10" X .50"

POLY CUTTING BOARD

(PANS NOT PROVIDED)

27" REFRIG.

19"REFRIG.

27" REFRIG.

PLATE SHELF

(PANS NOT PROVIDED)

48.5" X 10" X .50"

POLY CUTTING BOARD

4"DP

12x20

4"DP

12x20

4"DP

12x20

BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER

(PANS BY OTHERS)

17.75"

97"

25"

32" REFRIG.

85"

32" REFRIG.

27" REFRIG.

PLATE SHELF

80"

(PANS NOT PROVIDED)

85" X 10" X .50"

POLY CUTTING BOARD

BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER

(PANS BY OTHERS)

12x20

4"DP 4"DP

12x20

4"DP

12x20

4"DP

12x20

25"

4"DP

12x20

BUILT-IN COLD PAN W/RECESSED PANS, HINGED COVER

(PANS BY OTHERS)

(PANS NOT PROVIDED)

4'DP

12x20

4"DP

12x20

80" X 10" X .50"

POLY CUTTING BOARD

12x20

25"

SECTION VIEW

Randell 51355LPPO Datasheet

Randell 51355LPPO Datasheet

Randell 51355LPPO Datasheet

Related papers

Other documents