1055 Mendell Davis Drive, Jackson, MS 39272
888-994-7636, unifiedbrands.net
Please reference our website for the most
updated product information and specifications.
Custom Remote Refrigerated Storage models 53000LPPO
Description:
Remote drawer base refrigerator storage units with mechanically cooled
pan opening. These units are offered in variety of lengths to meet your
specific base storage or pan storage requirements. The mechanically cooled
pan opening uses Randell’s exclusive design technologies, such as our
Exclusive Refrigerated Pan Opening Thermostat allowing customers
to make adjustments to the opening temperatures (independent of the
base). The base is designed with a “low-profile” cabinet and is supplied
with a plate shelf above the refrigerated door openings.
These units feature our Patented Drawer Cartridge Assembly.
A fully welded, unitized drawer cartridge assembly with a quick release
that allows the refrigerated drawers to be easily removed for cleaning.
This equipment is intended for use in rooms having an ambient temperature of
86˚F (30˚C) or less.
model 53375LPPO shown with:
•optional nished end
•pan covers removed
•standard backsplash removed
Standard Features:
• “Low-prole” refrigerated cabinet with plate shelf above
• Low prole 2" recess pan design provides easy reach and optimal pan
temperatures & reliability
• Full Length Poly Cutting Board
• Front breathing compressor housing with directed air ow-Randell Exclusive
• Patented Drawer Cartridge System with easy maintenance Press-Fit gaskets
- A Randell Exclusive
• Pan opening thermostat-
A Randell Exclusive
• Drain in pan opening for easy cleaning
• Hinged Removable stainless steel covers
• Automatic base defrost
• Foamed in place urethane insulation providing superior insulation and durability
• 6" high adjustable legs, moveable left to right if needed
• Available up to 16' under one common assembly
• Adapter bars are standard to accommodate a compliment of 1/6 size pans
• Filter dryer installed on each liquid line
Specifications:
Options & Accessories:
Hinged slide-back removable covers
Lift-Off (removable) night covers
Stainless Steel Ends
Stainless Steel Back
Laminate fronts, ends and back options
Casters in lieu of legs
Export voltages
Electric condensate evaporator
Wide pan opening
CABINET EXTERIOR: Top to be one piece of die-formed 16 gauge
stainless steel with 2 1/2" nosing. Backsplash to be coved cornered,
with 45˚ return at top and overall height of 6 3/4". Ends at top tted
with recessed heavy duty steel bars for field bolting units together,
producing a hairline seam. Exterior body to be corrosion resistant steel.
Door opening frames are ABS and contain magnetic strip for positive
seal of door gaskets. Work surface to be at 36" work height. Legs to be
6" high stainless steel with adjustable bullet foot. Legs mounted to full
length channel frame assembly which is integrally welded to bottom of
body assembly. Legs can be moved left to right to avoid oor obstacles
during installation.
CABINET INTERIOR: Base interior to be ABS thermoplastic at ends only.
Stainless steel interior liner to be coved cornered to form bottom, back
and top. One baked enamel finished shelf provided behind each door.
Unit insulation to be CFC free foamed in place urethane.
REFRIGERATED DRAWERS: Fully welded, unitized drawer cartridge
assembly - patented. Heavy duty full extension 14 gauge drawer tracks
on 1 5/8" heavy duty stainless steel bearings. Will accommodate (2)
12" x 20" x 4" deep pans per drawer (pans not included). Quick release
allows drawers to be easily removed for cleaning. Stainless fronts,
mounted to drawer cartridge assembly with easy to grasp drawer
handles. Drawers are self-closing with press fit magnetic gaskets -
(designed for installation & removal without tools).
REFRIGERATION:Refrigerant to be specied by customer. System is a
balanced heavy duty set-up to accept hook-up to a single compressor
system. The base is cooled by an independent blower coiled operating on
its own expansion valve and thermostat and operates through a dedicated
solenoid valve. The pan opening is provided with its own expansion valve,
thermostat, and operates through its own dedicated solenoid valve (lo-
cated in the compressor housing) making it easily adjustable for specific
ambient conditions without effecting the balance of the system. An on/off
switch for the pan opening is provided.
Randell Custom, Page 21a
PP SPEC0136 Rev. A
Revised 07/07
model 53330LPPO 53338LPPO 53343LPPO 53355LPPO 53360LPPO 53363LPPO
53368LPPO 53373LPPO 53385LPPO
33°F to 40°F 18°F to 22°F33°F to 41°F
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.
Length
73" 85"
Model 33" deep 53373LPPO 53385LPPO
# of sets of doors (2) sets 32" (1) set 19"
+ 5" mullion (2) sets 27"
+ (2) 3" mullion
+ 6" mech. hsg.
Total # of 12x12 (8) 12x20’s (10) 12x20’s
pans in drawer
Min. # Pans (10) 1/6 (10) 1/6
Min. Length 41” 41”
(clear) of opening
Max. # Pans (18) 1/6 (20) 1/6”
Cutting Bd. Width 11" wide 11" wide
Recommended*
H.P./Refrigerant 1/2hp/404a 1/2hp/404a
Volt/Cycle/Phase 115/60/1
115/60/1
Amps 5.0 5.0
Ship Wt. - lbs. 617 717
BTU Design load 680/1186 832/1472
(-10)/Base (+20)
Evap. BTU/°TD** 30/120 36/120
opening/base
5300OLPP0 Series
53000LPPO SERIES REMOTE DRAWER BASE REFRIGERATORS WITH STANDARD DEPTH RECESSED PAN OPENING
Length
30" 38" 43" 55" 60" 63"
68"
Model 33" deep 53330LPPO 53338LPPO 53343LPPO 53355LPPO 53360LPPO 53363LPPO 53368LPPO
# of sets of doors (1) set 19" (1) set 27" (1) set 32" (1) set 19" (1) set 19" (2) sets 27" (1) set 27"
+ 5" mullion + 5" mullion + 5" mullion (1) set 27" (1) set 27" + 3" mullion (1) set 32"
+ 6" mech. hsg.
+ 6" mech. hsg.
+ 6" mech. hsg.
+ 3" mullion
+ 3" mullion
+ 6" mech. hsg.
+ 3" mullion
+ 6" mech. hsg. + 6" mech. hsg. + 6" mech. hsg.
Total # of 12x12 (2) 12x20’s (4) 12x20’s (4) 12x20’s (6) 12x20’s (6) 12x20’s (8) 12x20’s (8) 12x20’s
pans in drawer
Min. # Pans (6) 1/6 (6) 1/6 (6) 1/6 (6) 1/6 (10) 1/6 *(6) 1/6 (10) 1/6
Min. Length 27” 27” 27” 27” 41” 41” 41”
(clear) of opening
Max. # Pans (6) 1/6 (8) 1/6” (10) 1/6” (14) 1/6” (14) 1/6” (14) 1/6” (14) 1/6”
Cutting Bd. Width 10" wide 10" wide 10" wide 10" wide 10" wide 10" wide 10" wide
Recommended*
H.P./Refrigerant 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/3hp/404a 1/2hp/404a 1/2hp/404a 1/2hp/404a
Volt/Cycle/Phase 115/60/1
115/60/1 115/60/1 115/60/1 115/60/1 115/60/1 115/60/1
Amps 5.0 5.0 5.0 5.0 5.0 5.0 5.0
Ship Wt. - lbs. 391 422 463 524 571 587 602
BTU Design load 227/446 302/563 378/636 454/791 605/996 605/1040 680/1113
opening
(-10)/Base (+20)
Evap. BTU/°TD** 13/120 16/120 19/120 22/120 27/120 27/120 30/120
opening/base
NOTE: Pan capacity reected is the actual amount of pans that
are clearly accessible by the operator. Units with multiple covers may
actually have additional pan capacity that is partially obstructed by the
cover divider/mullion.
*BTU loads shown are based on 100° ambient plus 30% for usage and product loading in base.
Final system selection should consider usage requirements and combined loads.
Recommended H.P. reects Randell H.P. applied to self-contained (single) unit of equal storage
capacity, increasing HP may be appropriate in some remote applications.
**Evaporator BTU/*TD reects NSF refrigerated base requirements when base is provided with
+20° F system separate from -10°F pan opening system.
***Remote pan openings intended to be connected to separate low-temp system,
can be as small as (6) pans on any size base.
Component
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.
53000LPPO Series
25"
NOTE: REQUIRES (2)
REFRIGERATION HOOK-UPS
CONDENSATE DRAIN 1/2 "
1/4" LIQUID, 3/8" SUCTION
115V-60Hz-1Ph
PVC 8-1/2" AFF.
LOCATION
EVAPORATOR COIL
R134A REFRIG.
R-22 REFRIG.
R404 REFRIG.
CHOOSE ONE:
LINE 8 1/2 " AFF
MODEL # 53000LPP0
JUNCTION BOX 26"
AFF. FAN MOTOR(S) AND
AFF. = ABOVE FINISHED FLOOR
LEGEND FOR
OC
J
LIGHT(S)
OR
(PANS NOT PROVIDED)
PLATE SHELF
27" REFRIG.
27" REFRIG. 27" REFRIG.
27" REFRIG.
4"DP
12x20
4"DP
12x20 12x20
4"DP
4"DP
12x20
63"
25"
(PANS NOT PROVIDED)
32" REFRIG.
32" REFRIG.19"REFRIG.
19"REFRIG.
PLATE SHELF
(PANS NOT PROVIDED)
4"DP
12x20
4"DP
12x20
12x20
4"DP
25"
60"
17.75"
19"REFRIG.
19"REFRIG.
(PANS NOT PROVIDED)
27" REFRIG.
PLATE SHELF
27" REFRIG.
(PANS NOT PROVIDED)
4"DP
12x20
12x20
4"DP
12x20
4"DP
55"
17.75"
33"
36"
42.75"
BUILT-IN COLD PAN W/RECESSED PANS, HINGED
COVER (PANS BY OTHERS)
63" X 10" X .50"
POLY CUTTING BOARD
60" X 10" X .50"
POLY CUTTING BOARD
BUILT-IN COLD PAN W/RECESSED PANS, HINGED
COVER (PANS BY OTHERS)
55" X 10" X .50"
POLY CUTTING BOARD
BUILT-IN COLD PAN W/RECESSED PANS, HINGED
COVER (PANS BY OTHERS)
32" REFRIG.
32" REFRIG.
PLATE SHELF
PANS NOT PROVIDED
43" X 10" X .50"
POLY CUTTING BOARD
4"DP
12x20
BUILT-IN COLD PAN W/RECESSED PANS, HINGED
COVER (PANS BY OTHERS)
12x20
4"DP
25"
43"
27" REFRIG.
27" REFRIG.
PLATE SHELF
(PANS NOT PROVIDED)
38" X 10" X .50"
POLY CUTTING BOARD
BUILT-IN COLD PAN W/RECESSED PANS, HINGED
COVER (PANS BY OTHERS)
12x20
4"DP
12x20
4"DP
25"
38"
J
OC
OR
PLATE SHELF
19"REFRIG.
19"REFRIG.
(PANS NOT PROVIDED)
30" X 10" X .50"
POLY CUTTING BD
BUILT-IN COLD PAN W/RECESSED PANS, HINGED
COVER (PANS BY OTHERS)
12x20
4"DP
30"
17.75"
6"
Page 21b
Component
1055 Mendell Davis Drive, Jackson, MS 39272, 888-994-7636, unifiedbrands.net
© 2009 Unified Brands. All Rights Reserved. DOVER® and the DOVER® Logo are registered
trademarks in the United States [and various other countries] of Unified Brands, a
wholly-owned subsidiary of Dover Corporation.
53000LPPO Series
25"
85"
17.75"
25"
73"
19"REFRIG.
19"REFRIG.
27" REFRIG.
PLATE SHELF
27" REFRIG.
(PANS NOT PROVIDED)
27" REFRIG.
27" REFRIG.
(PANS NOT PROVIDED)
85" X 10" X .50"
POLY CUTTING BOARD
BUILT-IN COLD PAN W/RECESSED PANS, HINGED
COVER (PANS BY OTHERS)
4"DP
12x20
4"DP
12x20
12x20
4"DP
12x20
12x20
4"DP
4"DP
32" REFRIG.
PLATE SHELF
32" REFRIG.
32" REFRIG.
32" REFRIG.
(PANS NOT PROVIDED)
12x20
4"DP
12x20
4"DP
73" X 10" X .50"
POLY CUTTING BOARD
12x2012x20
4"DP 4"DP
BUILT-IN COLD PAN W/RECESSED PANS, HINGED
COVER (PANS BY OTHERS)
PLATE SHELF
27" REFRIG.
27" REFRIG.
32" REFRIG.
32" REFRIG.
(PANS NOT PROVIDED)
68" X 10" X .50"
POLY CUTTING BOARD
BUILT-IN COLD PAN W/RECESSED PANS, HINGED
COVER (PANS BY OTHERS)
12x20
4"DP
12x20
4"DP
4"DP
12x20
4"DP
12x20
25"
68"
25"
85"
17.75"
25"
73"
19"REFRIG.
19"REFRIG.
27" REFRIG.
PLATE SHELF
27" REFRIG.
(PANS NOT PROVIDED)
27" REFRIG.
27" REFRIG.
(PANS NOT PROVIDED)
85" X 10" X .50"
POLY CUTTING BOARD
BUILT-IN COLD PAN W/RECESSED PANS, HINGED
COVER (PANS BY OTHERS)
4"DP
12x20
4"DP
12x20
12x20
4"DP
12x20
12x20
4"DP
4"DP
32" REFRIG.
PLATE SHELF
32" REFRIG.
32" REFRIG.
32" REFRIG.
(PANS NOT PROVIDED)
12x20
4"DP
12x20
4"DP
73" X 10" X .50"
POLY CUTTING BOARD
12x2012x20
4"DP 4"DP
BUILT-IN COLD PAN W/RECESSED PANS, HINGED
COVER (PANS BY OTHERS)
PLATE SHELF
27" REFRIG.
27" REFRIG.
32" REFRIG.
32" REFRIG.
(PANS NOT PROVIDED)
68" X 10" X .50"
POLY CUTTING BOARD
BUILT-IN COLD PAN W/RECESSED PANS, HINGED
COVER (PANS BY OTHERS)
12x20
4"DP
12x20
4"DP
4"DP
12x20
4"DP
12x20
25"
68"
Component
SECTION VIEW
-
1
-
2
-
3
-
4
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Southbend 30096RSB Datasheet
-
Delfield F170S36 User manual
-
Delfield F2000 User manual
-
Delfield F2952C User manual
-
Carrier BT30RSFMS-4.1 Service & Installation Manual
-
-
Silver King SKP278 Datasheet
-
Southbend 20048SB Datasheet
-
Notifier BB-25 Operating instructions
-
Notifier BB-25 Cabinet Operating instructions