KLT KLT Wireless Car Charger Mount 15W Qi Fast Charging Auto-Clamping Windshield Dash Air Vent Car Phone Holder Compatible User manual

Brand
KLT
Model
KLT Wireless Car Charger Mount 15W Qi Fast Charging Auto-Clamping Windshield Dash Air Vent Car Phone Holder Compatible
Type
User manual
Suction Cup Mount
X 1
Air Vent Clip
X 1
Easily charging your phone wirelessly while driving
15W wireless fast charging, no need to plug and unplug the charging
cable
Wireless bracket rotates 180 degrees with the perfect viewing angle
Support installation: center console / front glass / air conditioning
airvent
Product Specification
Adjustable bottom of wireless stand to match different sizes mobile
phones
Feature
Ring Light Strip
Wireless Mount
X 1
Regulator
X 1
X 1
Charging Cable
Car Charger
X 1
User Manual
Induction Wireless Car Charging Mount
Thank you for choosing our product.
Please read this manual carefully before using it
Mounted on the windshield
Installation steps
1.Insert the adjuster into the ball
3.Fix the suction cup mount
firmly on the windshield, adjust
the control shaft
2.Insert the ball into the back of
the wireless stand then tighten
4.Connect the wireless mount
and USB cable interface
6.Open the clamp arm, put the
phone in, and extend the bottom
bracket to adjust (bottom mount
adjuster) electrical position
5. Connect the other end to the
interface of the car charger
Fixed Switch
Air vent clip
Wireless stand rotation angle
90°
Bottom bracket adjuster
Fixed Switch
Operation instructions
1、Bright blue, cyan aura flashing: Power connection, power-on
status
2、Green light surround: Standby state
3、Green light circulation on both sides: Working status
4、Full circle red light flashing: Foreign object detection status
Button :
①Open/Close the arm: Click the A button or the B button / press
the AB button at the same time
②Infrared enable/disable.Long press B button ( 1. Light off -
infrared induction enabled 2. Light on - infrared induction
disabled )
③Press and hold A: turn off or turn on the light strip
Light color description
Button: B
Infrared ndicator light
（sInduction disabled）
Button: A
Wireless bracket
Suction cup mount
Appearance
1
5
5
m
m
Bottom suction cup
Fixed rod
Rotate button
1
1
5
m
m
Fixed switch:
press: fixed state
open: adjustment state
Colorful Light
Intelligent sensing area
Clamp arm
Bottom bracket
Button: B
Infrared ndicator light
（sInduction disabled）
Button: A
①Support QI charging standard mobile phone
②Phone size：Lumia1520、Lumia929、Nexus6、iPhone8、
iPhone 8 plus、iPhone X、XR、XS、Nexus5、Xperia Xz、
S7、S8、S8+、S9、S9+、S10、Note7 etc....
Technical Parameters
Applicable models
Not suitable for the following air vent
Suitable for the following air vent
Input voltage
Product material
Wiring length
Product output
Induction wireless car charging mount
Type-C
1m
Interface
15W Max
Optimal transmission distance
3-8mm
PC fire V0 grade material + glass + silica gel combination
5V 2A 9V 1.8A
Installed on the center console
3.Connect the wireless mount
and USB interface
1.Find a flat area, secure the
suction cup mount on the center
console and adjust the control
axis
2.Fix the suction cup mount
firmly on the windshield, adjust
the control shaft, and press the
fixed switch
Fixed Switch
4. Connect the other end to the
car electrical interface
5. Open the clamp arm, place
the phone, and extend the
bottom bracket (bottom mount
adjuster) to adjust the charge
Installed on the air conditioning vent
2.Insert the ball into the back of
unt then tighten
5. Connect the other end to the
interface of the car charger
1.Insert the adjuster into the ball
(Air vent clip)
6.Open the clamp arm, put the
phone in, extend the bottom
bracket to adjust (bottom
mount adjuster) charging
position
3.Insert the air outlet clip into the
blinds and adjust the switch
4. Connect the wireless mount
and USB interface
Precautions
1. Please use this product correctly according to the
instructions
2. It is strictly forbidden to disassemble,impact, put
into fire or water in this product
3. Do not use the wireless charger in high temperature,
humidity or corrosive environment to avoid leakage
due to circuit damage
4.Please do not degauss the wireless charger near the
card with magnetic stripe or chip (ID card, credit card,
etc.)
6. Please keep it safe. Don't let your child use the
wireless charger as a toy to avoid accidents
5.Do not scrub this product with harsh chemicals such
as soap or detergent
7.If the product is found to be deformed, leaking or
smelly, please stop using it immediately
Product certification
  • Page 1 1
  • Page 2 2

KLT KLT Wireless Car Charger Mount 15W Qi Fast Charging Auto-Clamping Windshield Dash Air Vent Car Phone Holder Compatible User manual

Brand
KLT
Model
KLT Wireless Car Charger Mount 15W Qi Fast Charging Auto-Clamping Windshield Dash Air Vent Car Phone Holder Compatible
Type
User manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents