squish SQ261 User guide

Type
User guide
SQUISH
USER GUIDE
Electronic Wireless Charger Phone Mount
You can now quickly and wirelessly charge your phone.
Assemble provided mounting arm with wireless mount.
Lift lever to release suction cup. Place on a flat surface then push
down lever to secure mount arm. Connect provided usb cable.
Quick Installation Guide
Arm Mount
Continue reading for detailed instructions.
Loosen bottom knob, adjust arm to desired
angle then tighten knob to secure position.
Counter-Clockwise
to loosen and adjust.
Clockwise to tighten
and secure.
Loosen top knob, extend arm to desired
height, tighten knob to secure position.
Counter-Clockwise
to adjust.
Clockwise to tighten
and secure.
Attach mount arm to tightening bolt.
Screw mount arm and bolt onto
wireless charger to secure mount arm.
Locate a flat surface on your dashboard
or a corner space on your windshield.
CAUTION: DO NOT OBSTRUCT YOUR WINDSHIELD VIEW.
IF INSTALLING ON WINDSHIELD ONLY INSTALL ON CORNERS.
Place unlocked mount onto a clean flat
surface. Lock mount to secure position.
Press lever down to lock
and secure mount.
Press lever up to unlock
and release suction.
Slide your phone into your
wireless charger mount.
The electronic grip automatically
and securely grips your phone.
To unmount press either side button
to release grip then remove phone.
You can now wirelessly charge your phone,
& mount/unmount your phone with ease.
We want you to be fully satisfied
with your new Wireless Charger.
We want to hear from you!
Please leave us feedback or post a review!
Thank you for choosing
SQUISH
Electronic Wireless Charger Phone Mount
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

squish SQ261 User guide

Type
User guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI