PROAIM P-MC-CNL-01 User manual

Brand: PROAIM

Model: P-MC-CNL-01

Type: User manual

PROAIM P-MC-CNL-01 is an advanced motion control system designed for precise camera movements. With its motorized slider and remote controller, you can achieve smooth panning, tilting, and sliding shots. It's perfect for creating dynamic videos and time-lapses. Easily set up your camera using the included 1/4"-20 screw and convertible screw. Power the system using the 12V adapter or a battery (not included). Experience professional-level motion control with PROAIM P-MC-CNL-01.

PROAIM P-MC-CNL-01 is an advanced motion control system designed for precise camera movements. With its motorized slider and remote controller, you can achieve smooth panning, tilting, and sliding shots. It's perfect for creating dynamic videos and time-lapses. Easily set up your camera using the included 1/4"-20 screw and convertible screw. Power the system using the 12V adapter or a battery (not included). Experience professional-level motion control with PROAIM P-MC-CNL-01.

1

What’s In The Box

Please inspect the contents of your shipped package to ensure you have received everything

that is listed below.

All rights reserved.

No part of this document may be reproduced, stored in a retrieval system, or transmied by any form or by any means,

electronic, mechanical, photo-copying, recording, or otherwise, except as may be expressly permied by the applicable

copyright statutes or in wring by the Publisher.

Advanced Moon Control System (P-MC-CNL-01)

Assembly Manua l

Camera Plate with Motor

12v Adapter

Remote Controller

3mtr Wire

Adapter

1 x 1/4" to 3/8" Convertible Screw,

1 x 1/4"-20 Screw & Accessories.

2

Moon Control Setup

Loosen the knob of camera plate and remove

the camera plate from the Slider.

Pull out the motor from the camera base

plate as shown in the image.

Loosen both side knobs of camera plate then

aach onto the slider and ghten the

provided knob.

Push the motor towards your side and aach

the motor with slider as shown in image.

Aach the 3 pin side of the wire with the

camera plate as shown.

3

You can Power the Remote Controller with 2 ways

1. 12v Adapter

2. Baery

12v Adapter: Aach the 12v Adapter

with controller then press the power

buon.

Battery: Attach the battery (Not

Included) with controller then press the

power button

Aach the another side of the wire (5 pin)

with remote controller for movement of

slider.

YOUR PROAIM ADVANCED MOTION CONTROL SYSTEM

ALL DRESSED UP AND READY TO GO!

(SHOWN WITH OPTIONAL ACCESSORIES)

4

Warranty: We oer one year warranty for our products from date of purchase. Within this period of

me, we will repair it without charge for labor or parts. Warranty doesn’t cover transportaon costs nor

does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to

inspecon and evaluaon by us.

Liability: We are not liable for damage caused by products that we do not supply or from mishandling

in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our

company.

Contact Us: In case of any kind of dissasfacon, please Contact us immediately and we promise our

utmost support and care unl you use our product.

1
2
3
4

PROAIM P-MC-CNL-01 User manual

Brand: PROAIM

Model: P-MC-CNL-01

Type: User manual

PROAIM P-MC-CNL-01 is an advanced motion control system designed for precise camera movements. With its motorized slider and remote controller, you can achieve smooth panning, tilting, and sliding shots. It's perfect for creating dynamic videos and time-lapses. Easily set up your camera using the included 1/4"-20 screw and convertible screw. Power the system using the 12V adapter or a battery (not included). Experience professional-level motion control with PROAIM P-MC-CNL-01.

Related papers

Other documents