2. Legrand
  3. RFLC Control4 Integration

Legrand RFLC Control4 Integration User guide

  • Hello! I am an AI chatbot trained to assist you with the Legrand RFLC Control4 Integration User guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Integrating RF Lighting Control
with
Prerequisites:
1. Reserve LC7001 DHCP assigned IP address
2. Download driver file
3. Unzip to: My Documents > Control4 > Drivers
• Legrand_rflighting_controller.c4z
• Legrand_rflighting_dimmer.c4z
• Legrand_rflighting_switch.c4z
Step 1: Add LC7001 Driver
1. Open: System Design > Select Room > Items > Search
• Check: Local
• Category: Lighting
• Type: – All Types –
• Manufacturer: Legrand
2. Double-Click: Legrand RF Lighting Controller
• Note Connection Status: NOT_CONNECTED / CREATING_CONNECTION
3. Open: Connections > Network
4. Select: Legrand RF Lighting Controller
• Click Identify
• Enter IP Address
• Close
5. Verify Driver Connection Status: OPERATIONAL
• Open: System Design > Legrand RF Lighting Controller
Step 2: Add device drivers
1. Select a Room
2. Double-Click: Legrand RF Lighting Dimmer or Legrand RF Lighting Switch
3. Rename device
4. From the Advanced Properties > Properties menu: Select Zone
5. Click: Set
6. OPTIONAL: Configure Properties
• Ramp Rate Up
• Ramp Rate Down
• Preset Level
v.062419
Integrating RF Lighting Control
with
v.062419
Step 3: Define the Navigator
1. Select Room: Open Navigator > Experience Menus > Lights
• Click – “Modify”
• Define Order of Visible Devices using “Move Up/Down”
Step 4: Refresh Navigators
1. Select File/Refresh Navigators
Notes:
• For voice integration with:
• Amazon Alexa, enable the Control4 Skill
• “Works with Google” IS NOT supported
• If the RF Lighting Control systems IS NOT using the Legrand in-wall scene controllers (LC2303xx, ADTHRIWHCxx,
ADTPRIWHCxx):
• Scenes MUST be set up using the Control4 Advanced Lighting Agent
• If the RF Lighting Control systems IS using Legrand in-wall scene controllers (LC2303xx, ADTHRIWHCxx,
ADTPRIWHCxx):
• DO NOT use the Button Behavior “Toggle Scene On/Off” feature in the Legrand Lighting Control app.
• DO NOT use the plus/minus buttons on the Legrand in-wall scene controllers
These behaviors are NOT supported by the Control4 driver.
/