Legrand ELAN Integration User guide

Brand: Legrand

Model: ELAN Integration

Type: User guide

Integrating RF Lighting Control

with

Prerequisites:

1. Reserve LC7001 DHCP assigned IP address

2. Download driver ﬁle

3. Unzip to: My Documents > Control4 > Drivers

• Legrand_LC7001_Controller.EDRVC

Step 1: Add LC7001 Driver

1. Open: g! Tools > Conﬁgurator > Lighting

• Right-Click “Lighting Interfaces”

• Add New Lighting Interface

• Name the interface

2. Select: Search Folder

• Navigate to the folder you extracted the driver to

• Click: OK

• Select: Legrand On-Q LC7001_ip

• Click: OK

3. Enter: IP Address of the LC7001

• Click: Apply

Step 2: Add/Conﬁgure Custom Buttons

1. Right-Click: Custom Pages

• Add New Custom Page

• Name the page

2. Right-Click: Add New Control

• Dimmers

• Light Dimmer Control

• Light Switch Control

• Switches

• Light Toggle Control

• Light Switch Control

• Scene Buttons

• Light Scene Button (From Keypad)

• Lighting Keypad

3. Conﬁgure Button Properties

• Select load to control using “Connect To” drop-down list

v.062019

Integrating RF Lighting Control

with

v.062019

Step 3: Supported Programing Options for other User Interfaces & Event Mapper

1. Switches

• On

• Off

2. Dimmers

• On (Last Level)

• Off

• Set Level to %

3. Scenes

• Action On

• Action Off (NOT SUPPORTED)

Legrand ELAN Integration User guide

Legrand ELAN Integration User guide

Legrand ELAN Integration User guide

Related papers

Other documents