Toro Front Pivot Arm Kit, Heavy-Duty Recycler/Rear Bagger Lawn Mower Installation guide

Type
Installation guide
FormNo.3394-369RevA
FrontPivotArmKit
Heavy-DutyRecycler
®
/RearBaggerLawnMower
ModelNo.131-5304
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
Important:Saveallthepartsthatyouremovefromthe
machineinthisprocedureexceptthefrontpivotarm
andthe2Bellevillewashers.
1.Removetheangenutandthewheelfromthemachine
(Figure1).
Figure1
1.Flangenut
2.Removethelocknutthatsecuresthespringarmand
thefrontpivotarmtothemachine(Figure2).
Figure2
1.Axle
5.Frontpivotarm(discard)
2.Bolt(3/8x2-3/4inches)
6.Wheelspacer
3.Bellevillewasher(discard)
7.Locknut
4.Springarm
3.Removethewheelspacer,frontpivotarm,springarm,
bolt(3/8x2-3/4inches),and2Bellevillewashers
(Figure2).
4.Discardthefrontpivotarmandthe2Belleville
washers.
5.Installthebolt(3/8x2-3/4inches)intothenewfront
pivotarmfromtheinsideasshowninFigure3.
©2015—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3394-369*A
Figure3
1.Axle5.Wheelspacer
2.Bolt(3/8x2-3/4inches)
6.Locknut
3.Springarm
7.Flangenut
4.Newfrontpivotarm
6.Installthespringarmandthenewfrontpivotarm
(withthebolt—3/8x2-3/4inches)andsecurethem
withthelocknut(Figure3).
Note:Torquethelocknutto68to81N-m(50to60
ft-lb).
7.Installthewheelspacerandwheelontothemachine
andsecurethemwiththeangenut(Figure3).
Note:Torquetheangenutto28to45N-m(250
to400in-lb).
8.Repeatthisprocedurefortheotherfrontwheel
assembly.
2
  • Page 1 1
  • Page 2 2

Toro Front Pivot Arm Kit, Heavy-Duty Recycler/Rear Bagger Lawn Mower Installation guide

Type
Installation guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI