Toro Front Pivot Arm Kit, Heavy-Duty Recycler/Rear Bagger Lawn Mower Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Toro Front Pivot Arm Kit, Heavy-Duty Recycler/Rear Bagger Lawn Mower Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
FormNo.3394-369RevA
FrontPivotArmKit
Heavy-DutyRecycler
®
/RearBaggerLawnMower
ModelNo.131-5304
InstallationInstructions
WARNING
CALIFORNIA
Proposition65Warning
ThisproductcontainsachemicalorchemicalsknowntotheStateofCaliforniato
causecancer,birthdefects,orreproductiveharm.
Important:Saveallthepartsthatyouremovefromthe
machineinthisprocedureexceptthefrontpivotarm
andthe2Bellevillewashers.
1.Removetheangenutandthewheelfromthemachine
(Figure1).
Figure1
1.Flangenut
2.Removethelocknutthatsecuresthespringarmand
thefrontpivotarmtothemachine(Figure2).
Figure2
1.Axle
5.Frontpivotarm(discard)
2.Bolt(3/8x2-3/4inches)
6.Wheelspacer
3.Bellevillewasher(discard)
7.Locknut
4.Springarm
3.Removethewheelspacer,frontpivotarm,springarm,
bolt(3/8x2-3/4inches),and2Bellevillewashers
(Figure2).
4.Discardthefrontpivotarmandthe2Belleville
washers.
5.Installthebolt(3/8x2-3/4inches)intothenewfront
pivotarmfromtheinsideasshowninFigure3.
©2015—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420
Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved
*3394-369*A
Figure3
1.Axle5.Wheelspacer
2.Bolt(3/8x2-3/4inches)
6.Locknut
3.Springarm
7.Flangenut
4.Newfrontpivotarm
6.Installthespringarmandthenewfrontpivotarm
(withthebolt—3/8x2-3/4inches)andsecurethem
withthelocknut(Figure3).
Note:Torquethelocknutto68to81N-m(50to60
ft-lb).
7.Installthewheelspacerandwheelontothemachine
andsecurethemwiththeangenut(Figure3).
Note:Torquetheangenutto28to45N-m(250
to400in-lb).
8.Repeatthisprocedurefortheotherfrontwheel
assembly.
2
/