2. CLD
  3. MPD6 6 Inches Slim Led Light Flood Beam
MPD6 6 Inches Slim Led Light Flood Beam

CLD MPD6 6 Inches Slim Led Light Flood Beam, PD6 6 Inches Slim Led Light Flood Beam User manual

  • Hello! I've reviewed the user manual for the CLD LED Light CLDMPD6. This manual provides details on mounting and wiring the 6" slim LED work light, which features a flood beam pattern, 772 lumens output and operates on a 10-36V DC range. I'm ready to answer any questions you have about the device.
  • What is included with the LED work light?
    What is the light output of the LED light?
    What is the power consumption of the light?
    What is the voltage range of the light?
SKU# CLDMPD6 CLDLED.COM
1
WHAT’S INCLUDED:
1 X LED Work Light
2 X Bottom Mount Brackets
Mounting Hardware
6" SLIM LED LIGHT
FLOOD BEAM
CLDMPD6
FEATURES & SPECIFICATIONS:
Light Output: 772 Lumens
Power: 18W @ 13.6V DC
Current: 1.3A @ 13.6V DC
Voltage: 10 - 36V DC
Beam Pattern: Flood Beam
MOUNTING BRACKET INSTALL INSTRUCTION
SKU# CLDMPD6 CLDLED.COM
2
HARNESS INSTALL INSTRUCTION
Wiring Harness sold separately
1. Determine and suitable mounting locations to install the LED work lights, wiring harness and switch.
Once all mounting locations are confirmed, connect the wires as shown above. Proper insulation at
connections is required.
2. Connect positive wire and negative wire properly. Press the switch to test if the lights are
functioning properly.
3. Adjust the light to the desired angle and then secure by tightening all mounting screws.
/