2. CLD
  3. PD6FL 6 Inches Slim Led Light Flush Mount Flood Beam
PD6FL 6 Inches Slim Led Light Flush Mount Flood Beam

CLD PD6FL 6 Inches Slim Led Light Flush Mount Flood Beam, MPD6FL 6 Inches Slim Led Light Flush Mount Flood Beam User manual

  • Hello! I've reviewed the user manual for the CLD LED Work Light CLDMPD6FL. This document contains specifications and detailed mounting & wiring instructions. I can help you with any questions you have about its installation or features described in the manual.
  • What is included in the package?
    What is the light output?
    What is the voltage range for the light?
SKU# CLDMPD6FL CLDLED.COM
1
WHAT’S INCLUDED:
1 X LED Work Light
Mounting Hardware
6" SLIM LED LIGHT
FLUSH MOUNT
FLOOD BEAM
CLDMPD6FL
FEATURES & SPECIFICATIONS:
Light Output: 510 Lumens
Power: 18W @ 13.6V DC
Current: 1.3A @ 13.6V DC
Voltage: 10 - 36V DC
Beam Pattern: Flood Beam
MOUNTING & WIRING INSTALL INSTRUCTION
SKU# CLDMPD6FL CLDLED.COM
2
INSTALL INSTRUCTION
Wiring Harness sold separately
1. Determine and suitable mounting locations to install the LED work lights, wiring harness and switch.
2. Ensure your mounting surface is flat and allows for the light to go in. Also ensure your surface
allows enough room for the depth of the light.
3. Cut out only the hole for the light housing and drill the 2 outside holes.
4. Connect the wires as illustrated in page 1. Proper insulation at connections is required. Connect
positive and negative wire properly. Press the switch to test if the lights are functioning properly.
/