2. CLD
  3. Street Legal Light Bar
Street Legal Light Bar

CLD Street Legal Light Bar Installation guide

  • Hello! I've reviewed the instruction manual for the CLD light bars, including models CLDBARS6H, CLDBARS6F, CLDBARS10H, and CLDBARS20H. This document covers mounting, wiring, and specifications, such as light output and beam patterns. I'm ready to answer your questions about these light bars.
  • What is included with the light bar?
    What is the voltage range for the light bars?
    What beam pattern and compliance does the 6" light bar have?
SKU# CLDBARS6H / CLDBARS6F / CLDBARS10H / CLDBARS20H CLDLED.COM
1
WHAT’S INCLUDED:
1 X Light Bar
Side and Bottom Mount Brackets & Hardware
STREET LEGAL LIGHT BAR
DRIVING / FOG BEAM
CLDBARS6H
CLDBARS6F
CLDBARS10H
CLDBARS20H
FEATURES & SPECIFICATIONS:
Light Output: 718 - 6,898 Lumens
Power: 20W - 180W @ 13.6V DC
Voltage: 10 - 36V DC
Beam Pattern & Compliance:
6"Auxiliary High Beam (SAE J581, CLDBARS6H)
6"Fog Light (SAE J583, CLDBARS6F)
10"Auxiliary High Beam (SAE J581, CLDBARS10H)
20"Auxiliary High Beam (SAE J581, CLDBARS20H)
6" 10" 20"
Dimensions: mm
MOUNTING INSTALL INSTRUCTION
SKU# CLDBARS6H / CLDBARS6F / CLDBARS10H / CLDBARS20H CLDLED.COM
2
INSTALL INSTRUCTION
For Two 6" or 10" Light Bars
For One 6", 10" or 20" Light Bar
1. Determine suitable mounting locations to install the LED light bars, wiring harness and switch. Once
all mounting locations are confirmed, connect the wires as shown above. Proper insulation at
connections is required.
2. Connect positive and negative wire properly. Press the switch button to test if the lights are
functioning properly.
3. Adjust the light to the desired angle and then secure by tightening all mounting screws.
/