CONCORD Detail Steel Hutch Installation guide

CONCORD
Brand
CONCORD
Model
Detail Steel Hutch
Type
Installation guide
The Responsible Solution
Installation Manual Detail
Steel Hutch
Steel Hutch
Explosion
View
Step 1
*SAFETY ISSUE/DANGER: THE
HUTCH TO BE BOLTED TO
THE WORK TOP TO PREVENT
ACCIDENTAL TIPPING
LH SUPPORT
RH SUPPORT
“L” ANGLE (fits worktop :NOT
SHOWN IN IMAGE. SEE NEXT
PAGE)
BACKWALL WITH SLOTTED END
CHANNELS
“L” ANGLE BRACKET MUST BE INSTALLED AND FASTEND ONTO THE
DESK TO SECURE THE HUTCH TO IT
INSIDE STOWING
FLIPPER DOOR
LH CABINET
SIDE
RH CABINET
SIDE
END VIEW
1
INSTALL SEQUENCE
1.
FIRST, ALIGN LH SUPPORT WITH BACKWALL SO THE SELF
CUTTING SCREWS FASTENS THE LH SUPPORT WITH THE
BACKWALL. REPEAT STEP FOR THE RH SUPPORT
LH SUPPORT
BACKWALL WITH SLOTTED
END CHANNELS
TOP VIEW OF BACKWALL AND SHELF
SUPPORT DETAIL
SELF CUTTING
SCREW
LH SUPPORT
BACKWALL WITH
SLOTTED END
CHANNELS
2
SEE
NEXT
PAGE
1
2
“L” ANGLE SLIDES ON THE INSIDE OF
THE RH AND LEFT HAND SUPPORT
THE “L” ANGLE SLIDES ONTO
THE WORK SURFACE AND #10
SELF CUTTING SCREWS IS
USED TO SECURE THE HUTCH
TO THE WORK SURFACE
3
WORKTOP
“L” ANGLE
MOUNTED ON
THE INSIDE OF THE
LH SUPPORT
*IN THESE PHOTOS SHOWING OUTSIDE OF THE RH FLIPPER DOOR SIDE BEING ENGAGED
INTO THE BACK WALL SLOTS USING THE HOOKS FROM THE FLIPPER DOOR SIDE. (IMAGES
SHOWN ABOVE)
2.
SECOND, ENGAGE THE HOOKS OF THE FLIPPER DOOR SIDE
INTO THE SLOTTED END CHANNELS ON THE BACKWALL.
CAREFULLY SIT THE FLIPPER DOOR SIDE ON TOP OF THE LH AND
RH SUPPORT. THEN USE #10 PAN HEAD SHEET METAL SCREW
TO INSTALL TOP AND BOTTOM SHELF THEN INSTALL FLIPPER
DOOR FRONT.
2
3
INSIDE OF FLIPPER DOOR SIDE ENGAGED INTO THE BACK WALL
SLOTS USING THE HOOKS SHOWN IN IMAGE ON
PREVIOUS PAGE.
UNDERNEATH THE FLIPPER DOOR
SIDE SITTING ON TOP OF THE RH
SUPPORT
BACKWALL WITH
SLOTTED END
CHANNELS
RH SUPPORT
USING SELF CUTTING #10
SCREWS TO FIT INTO 3/16
HOLES TO SECURE THE RH
SUPPORT AND FLIPPER
DOOR SIDE INTO PLACE
4
The Responsible Solution
www.concordproducts.com
1.800.220.5043
COMMITTED TO:
the environment
responsible manufacturing
minimal waste
® Trademarks of Concord Products Company, Inc.
INSTALLHUTCH-10 13
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

CONCORD Detail Steel Hutch Installation guide

CONCORD
Brand
CONCORD
Model
Detail Steel Hutch
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Other documents