H3C SecPath F100-A Firewall
Installation Manual
Hangzhou H3C Technologies Co., Ltd.
http://www.h3c.com
Manual Version: T2-08044B-20070622-C-1.03
Copyright © 2006-2007, Hangzhou H3C Technologies Co., Ltd. and its licensors
All Rights Reserved
No part of this manual may be reproduced or transmitted in any form or by any means
without prior written consent of Hangzhou H3C Technologies Co., Ltd.
Trademarks
H3C, , Aolynk, , H
3
Care,
, TOP G, , IRF, NetPilot,
Neocean, NeoVTL, SecPro, SecPoint, SecEngine, SecPath, Comware, Secware,
Storware, NQA, VVG, V
2
G, V
n
G, PSPT, XGbus, N-Bus, TiGem, InnoVision and
HUASAN are trademarks of Hangzhou H3C Technologies Co., Ltd.
All other trademarks that may be mentioned in this manual are the property of their
respective owners.
Notice
The information in this document is subject to change without notice. Every effort has
been made in the preparation of this document to ensure accuracy of the contents, but
all statements, information, and recommendations in this document do not constitute
the warranty of any kind, express or implied.
To obtain the latest information, please access:
http://www. h3c.com
Technical Support
customer_service@h3c.com
http://www. h3c.com
About This Manual
Related Documentation
In addition to this manual, each H3C SecPath Series Security Products documentation
set includes the following:
Manual Description
H3C SecPath Series Security Products
Operation Manual
It introduces the functional features,
principles and guide to configuration and
operation for H3C SecPath Series
Security Gateways/Firewalls.
H3C SecPath Series Security Products
Command Manual
It discusses all commands available in
the configuration and operation on H3C
SecPath Series Security
Gateways/Firewalls. The details include
command name, complete command
form, parameter, operation view, usage
description and configuration example.
H3C SecPath Series Security Products
Web-Based Configuration Manual
It directs users to configure the H3C
SecPath Series Firewalls in Web mode.
Organization
H3C SecPath F100-A Firewall Installation Manual is organized as follows:
Chapter Contents
1 Product Overview
Profiles the system characteristics and applications.
Product appearance and system description are
also available in this chapter.
2 Installation Preparations
Focuses on environment requirements for system
installation, precautions before and during
installation. Installation tools are also listed in this
chapter.
3 Firewall Installation
Elaborates on mechanical installation, physical
connection of power cords, console cables and
Ethernet cables.
4 Firewall Configuration
Presents fundamentals on system booting and
configuration.
5 Software Maintenance
Discusses system software maintenance, including
software upgrade and configuration file loading.
Chapter Contents
6 Troubleshooting
Lists common system failures and specific locating
methods.
7 MIM Modules
Details appearance, panel and LEDs of the
functional modules available on the H3C SecPath
F100-A, as well as module installation and
connection of interface cables.
Conventions
The manual uses the following conventions:
I. Command conventions
Convention Description
Boldface
The keywords of a command line are in Boldface.
italic
Command arguments are in italic.
[ ]
Items (keywords or arguments) in square brackets [ ] are
optional.
{ x | y | ... }
Alternative items are grouped in braces and separated by
vertical bars. One is selected.
[ x | y | ... ]
Optional alternative items are grouped in square brackets
and separated by vertical bars. One or none is selected.
{ x | y | ... } *
Alternative items are grouped in braces and separated by
vertical bars. A minimum of one or a maximum of all can be
selected.
[ x | y | ... ] *
Optional alternative items are grouped in square brackets
and separated by vertical bars. Many or none can be
selected.
&<1-n>
The argument(s) before the ampersand (&) sign can be
entered 1 to n times.
# A line starting with the # sign is comments.
II. GUI conventions
Convention Description
< >
Button names are inside angle brackets. For example, click
<OK>.
[ ]
Window names, menu items, data table and field names
are inside square brackets. For example, pop up the [New
User] window.
Convention Description
/
Multi-level menus are separated by forward slashes. For
example, [File/Create/Folder].
III. Symbols
Convention Description
Warning
Means reader be extremely careful. Improper operation
may cause bodily injury.
Caution
Means reader be careful. Improper operation may cause
data loss or damage to equipment.
Note Means a complementary description.
Environmental Protection
This product has been designed to comply with the requirements on environmental
protection. For the proper storage, use and disposal of this product, national laws and
regulations must be observed.
Installation Manual
H3C SecPath F100-A Firewall Table of Contents
i
Table of Contents
Chapter 1 Product Overview........................................................................................................1-1
1.1 Overview ............................................................................................................................ 1-1
1.2 Hardware Features ............................................................................................................ 1-3
1.2.1 Appearance............................................................................................................. 1-3
1.2.2 System Specifications ............................................................................................. 1-3
1.2.3 LEDs........................................................................................................................ 1-4
1.2.4 Fixed Interface Attributes ........................................................................................ 1-5
Chapter 2 Installation Preparations............................................................................................. 2-1
2.1 General Site Requirements ............................................................................................... 2-1
2.1.1 Temperature and Humidity...................................................................................... 2-1
2.1.2 Cleanliness.............................................................................................................. 2-1
2.1.3 ESD Prevention....................................................................................................... 2-2
2.1.4 Electromagnetic Compatibility................................................................................. 2-2
2.1.5 Lightning Protection ................................................................................................ 2-3
2.1.6 Checking the Rack .................................................................................................. 2-3
2.2 Safety Precautions............................................................................................................. 2-3
2.3 Unpacking Inspections....................................................................................................... 2-4
2.4 Installation Tools, Meters and Equipment ......................................................................... 2-4
Chapter 3 Firewall Installation .....................................................................................................3-1
3.1 Installation Flow ................................................................................................................. 3-1
3.2 Mounting the Firewall......................................................................................................... 3-2
3.2.1 Free-Standing.......................................................................................................... 3-2
3.2.2 Rack-Mounting ........................................................................................................ 3-2
3.3 Connecting the PGND Wire............................................................................................... 3-3
3.4 Connecting to the Console Terminal ................................................................................. 3-4
3.5 Connecting to the Ethernet Interface................................................................................. 3-5
3.6 Connecting the Power Cord............................................................................................... 3-6
3.7 Verifying Installation........................................................................................................... 3-7
Chapter 4 Firewall Configuration................................................................................................. 4-1
4.1 Booting............................................................................................................................... 4-1
4.1.1 Setting Up a Configuration Environment................................................................. 4-1
4.1.2 Powering Up the Firewall ........................................................................................ 4-4
4.1.3 Booting Process ...................................................................................................... 4-5
4.2 Configuration Fundamentals.............................................................................................. 4-6
4.2.1 Basic Configuration Procedures.............................................................................. 4-6
4.2.2 Command Line Interface......................................................................................... 4-7
Installation Manual
H3C SecPath F100-A Firewall Table of Contents
ii
Chapter 5 Software Maintenance................................................................................................. 5-1
5.1 Boot Menu.......................................................................................................................... 5-1
5.2 Upgrading Application and Boot ROM Using XModem..................................................... 5-2
5.3 Backing Up and Restoring the Extended Segment of the Boot ROM ............................... 5-5
5.4 Upgrading the Application Program Using TFTP .............................................................. 5-6
5.5 Uploading/Downloading Applications/Files Using FTP...................................................... 5-8
5.6 Modifying Boot ROM Password....................................................................................... 5-12
5.7 Resetting a Lost Password .............................................................................................. 5-13
Chapter 6 Troubleshooting ..........................................................................................................6-1
6.1 Troubleshooting PSU......................................................................................................... 6-1
6.2 Troubleshooting Configuration System ............................................................................. 6-1
6.3 Troubleshooting Application Upgrading............................................................................. 6-2
Chapter 7 MIM Modules................................................................................................................7-1
7.1 MIM Options....................................................................................................................... 7-1
7.2 Installing and Removing an MIM ....................................................................................... 7-1
7.3 Troubleshooting an MIM .................................................................................................... 7-3
7.4 1FE/2FE/4FE Module ........................................................................................................ 7-3
7.4.1 Introduction.............................................................................................................. 7-3
7.4.2 Appearance............................................................................................................. 7-3
7.4.3 Interface Attributes .................................................................................................. 7-4
7.4.4 Panel and Interface LEDs ....................................................................................... 7-5
7.4.5 Interface Cable........................................................................................................ 7-5
7.4.6 Connecting the Interface Cable............................................................................... 7-7
7.5 HNDE Module.................................................................................................................... 7-8
7.5.1 Introduction.............................................................................................................. 7-8
7.5.2 Interface Attributes .................................................................................................. 7-8
7.5.3 Panel and Interface LEDs ....................................................................................... 7-8
7.5.4 Troubleshooting the HNDE Module ........................................................................ 7-9
Installation Manual
H3C SecPath F100-A Firewall List of Figures
iii
List of Figures
Figure 1-1 Front panel of the H3C SecPath F100-A firewall.................................................. 1-3
Figure 1-2 Rear panel of the H3C SecPath F100-A firewall .................................................. 1-3
Figure 3-1 Installation flow for the firewall.............................................................................. 3-1
Figure 3-2 Rack-mount the firewall ........................................................................................ 3-3
Figure 3-3 Console cable assembly....................................................................................... 3-4
Figure 3-4 Ethernet cable assembly ...................................................................................... 3-5
Figure 4-1 Local configuration through the console port ....................................................... 4-1
Figure 4-2 Create a new connection...................................................................................... 4-2
Figure 4-3 Select connection port.......................................................................................... 4-2
Figure 4-4 Define port parameters......................................................................................... 4-3
Figure 4-5 Select emulation type ........................................................................................... 4-4
Figure 5-1 Send File dialog box ............................................................................................. 5-3
Figure 5-2 Sending File interface........................................................................................... 5-4
Figure 5-3 Set up the local upload/download environment.................................................... 5-8
Figure 5-4 Set up the remote upload/download environment................................................ 5-9
Figure 7-1 Install the MIM I .................................................................................................... 7-2
Figure 7-2 Install the MIM II ................................................................................................... 7-2
Figure 7-3 1FE module .......................................................................................................... 7-3
Figure 7-4 2FE module .......................................................................................................... 7-4
Figure 7-5 4FE module .......................................................................................................... 7-4
Figure 7-6 1FE module panel ................................................................................................ 7-5
Figure 7-7 2FE module panel ................................................................................................ 7-5
Figure 7-8 4FE module panel ................................................................................................ 7-5
Figure 7-9 Ethernet cable ...................................................................................................... 7-6
Figure 7-10 Category-5 twisted-pair cable............................................................................. 7-6
Figure 7-11 HNDE module panel ........................................................................................... 7-8
Installation Manual
H3C SecPath F100-A Firewall List of Tables
iv
List of Tables
Table 1-1 Technical specifications of the H3C SecPath F100-A firewall................................ 1-3
Table 1-2 LEDs on the H3C SecPath F100-A firewall............................................................ 1-4
Table 1-3 Attributes of the console port.................................................................................. 1-5
Table 1-4 Attributes of the AUX port ....................................................................................... 1-5
Table 1-5 Attributes of the Ethernet interfaces ....................................................................... 1-5
Table 2-1 Temperature/humidity requirements in the equipment room.................................. 2-1
Table 2-2 Limits on the dust particles in the equipment room................................................ 2-1
Table 2-3 Harmful gas limits in the equipment room.............................................................. 2-2
Table 3-1 Physical dimensions of the H3C SecPath F100-A firewall..................................... 3-2
Table 7-1 Interface attributes of the 1FE, 2FE and 4FE modules.......................................... 7-4
Table 7-2 LEDs on the 1FE/2FE/4FE module........................................................................ 7-5
Table 7-3 Straight-through cable pinout ................................................................................. 7-6
Table 7-4 Crossover cable pinout........................................................................................... 7-7
Table 7-5 Interface attributes of the HNDE module ............................................................... 7-8
Table 7-6 LEDs on the HNDE module.................................................................................... 7-9
Installation Manual
H3C SecPath F100-A Firewall Chapter 1
Product Overview
1-1
Chapter 1 Product Overview
1.1 Overview
H3C SecPath F100-A Firewall, developed by H3C Technologies, is a new-generation
firewall designed for enterprise users. It can work both as an egress firewall for small
and medium businesses and as an internal firewall for midsize enterprises.
H3C SecPath F100-A firewall provides four 10/100 Mbps autosensing LAN interfaces,
three 10/100 Mbps autosensing WAN interface and one MIM expansion slot which
supports multiple VPN access types and can accommodate the 1FE/2FE/4FE and
HNDE modules.
H3C SecPath F100-A firewall applies ASPF status detection technique to monitor
connection process and malicious commands and works together with access control
lists (ACLs) to implement dynamic packet filtering.
H3C SecPath F100-A firewall supports authentication, authorization, accounting (AAA ),
network address translation (NAT), hybrid mode, object oriented management, and
flow logging to ensure security and guaranteed services to the private networks
constructed on the open Internet.
H3C SecPath F100-A firewall supports multiple virtual private network (VPN) services,
such as layer 2 tunneling protocol (L2TP) VPN, IP security (IPsec) VPN, generic routing
encapsulation (GRE) VPN, and dynamic VPN, and allows users to build various VPNs,
like Internet, Intranet, and remote access VPNs using customized remote-user access
approaches, such as dial-up, leased line, Virtual LAN (VLAN), and tunneling.
H3C SecPath F100-A firewall provides basic routing features, including the routing
information protocol (RIP), open shortest path first (OSPF), routing policy, and policy
routing, as well as abundant QoS (quality of service) features, such as traffic policing,
traffic shaping, and multiple queue scheduling policies.
H3C SecPath F100-A firewall offers these main features:
I. IP VPN solution
Networks benefit enterprises in many ways; company headquarters can send important
information to its branch offices quickly and conveniently. To interconnect the intranets
of a company over the Internet, however, you need VPN technologies. The H3C
SecPath F100-A firewall provides abundant IP VPN services: L2TP and GRE provide
Layer 2 and Layer 3 tunneling respectively; IPsec provides tunnels encapsulated with a
security protocol.
Installation Manual
H3C SecPath F100-A Firewall Chapter 1
Product Overview
1-2
II. Data security and reliability
The H3C SecPath F100-A firewall offers:
z High network security. ACL-based packet filtering detects data packet at the
network and transport layers to prevent illegal intrusion. Application specific
packet filter (ASPF) detects information about the application layer protocols and
monitors traffic at the application layer.
z NAT. Other than the basic functions, the NAT also can limit the number of
concurrent connections for an individual user. This eliminates the malicious
resource seizures without any negative impact on general network applications. In
addition, its enhanced NAT application layer gateway (ALG) function provides NAT
traversal for H.323, FTP, ICMP, and so on.
z AAA and RADIUS user authentication
z VPN (including GRE, L2TP, and MPLS) with the IPsec and IKE technologies to
guarantee the security of private networks over the Internet.
z OSPF and RIP2 to offer MD5 authentication and guarantee reliable exchange of
routing information.
z Virtual router redundancy protocol (VRRP) to provide communication line or
equipment backup in case of failure. This effectively enhances network
robustness and reliability.
z Deeper application recognition (DAR) to recognize and classify packets more
deeply, enhancing the control over data flows.
z Active/standby switchover to protect current services against interruption,
eliminating the defects of traditional networking solution, for example, VRRP
networking solution.
III. Online software upgrade
You can upgrade the application and Boot ROM programs online to add features and
extend functions.
IV. Network management
The H3C SecPath F100-A firewall supports SNMPv3 network management
(compatible with SNMPv2c and SNMPv1) and provides powerful device management.
V. Regulatory compliance
Designed according to the standards dominant in China, North America, Europe,
Australia, and Japan, the H3C SecPath F100-A firewall complies with the requirements
of these countries and regions for electromagnetic compatibility (EMC), safety standard,
and network access.
Installation Manual
H3C SecPath F100-A Firewall Chapter 1
Product Overview
1-3
1.2 Hardware Features
1.2.1 Appearance
(1)
(2) (3)(4)(5) (6) (7) (8)(9)(10)(11)(12)(13)(14) (15)
ll
(1) MIM slot (2) Two LEDs for the fixed WAN 0 interface
(3) Two LEDs for the fixed WAN 1 interface (4) Two LEDs for the fixed WAN 2 interface
(5) Fixed WAN 0 interface (WAN 0) (6) Fixed WAN 1 interface (WAN 1)
(7) Fixed WAN 2 interface (WAN 2) (8) Fixed LAN 0 interface (LAN 0)
(9) Fixed LAN 1 interface (LAN 1) (10) Fixed LAN 2 interface (LAN 2)
(11) Fixed LAN 3 interface (LAN 3) (12) Auxiliary port (AUX)
(13) Console port (CONSOLE) (14) System LED (SYS)
(15) Power LED (PWR)
Figure 1-1 Front panel of the H3C SecPath F100-A firewa
(1) (2) (3)
ll
(1) Power switch (2) Power socket
(3) Grounding screw
Figure 1-2 Rear panel of the H3C SecPath F100-A firewa
1.2.2 System Specifications
Table 1-1 Technical specifications of the H3C SecPath F100-A firewall
Item Description
MIM slot 1
Fixed interface
Four 10/100 Mbps LAN interfaces, three
10/100 Mbps WAN interfaces
One AUX port
One console port (CONSOLE)
Boot ROM 512 KB
DDR SDRAM 256 MB
Installation Manual
H3C SecPath F100-A Firewall Chapter 1
Product Overview
1-4
Item Description
Flash memory 16 MB
Physical dimensions (H × W × D)
44 × 436 × 330 mm (1.7 × 17.2 × 13.0
in.) (excluding feet)
Weight
4 kg (8.8 lb)
Power supply
Rated voltage: 100 VAC to 240 VAC, 50
Hz or 60 Hz
Rated current: 1.5 A
Max. power consumption
54 W
Operating temperature
0°C to 40°C (32°F to 104°F)
Operating humidity (noncondensing)
10% to 90%
Note:
Double data rate synchronous dynamic random access memory (DDR SDRAM) stores
the communication data of the running system with the CPU.
1.2.3 LEDs
Table 1-2 LEDs on the H3C SecPath F100-A firewall
LED Description
PWR
Power supply unit (PSU) LED: OFF
means the PSU is not supplying power
to the device. ON means the PSU is
supplying power to the device.
SYS
System operating status LED: Blinking
means the system is operating normally.
OFF means the system is operating
abnormally.
LINK/ACT
OFF means no link is present. ON
means a link is present. Blinking means
packets are being transmitted/received.
100M
OFF means packets are being
transmitted/received at 10 Mbps on the
interface. ON means packets are being
transmitted/received at 100 Mbps on the
interface.
Installation Manual
H3C SecPath F100-A Firewall Chapter 1
Product Overview
1-5
1.2.4 Fixed Interface Attributes
I. Console port (CONSOLE)
Table 1-3 Attributes of the console port
Item Description
Connector
RJ-45
Interface standard
RS-232
Baud rate
1,200 bps to 115,200 bps, defaults to
9,600 bps
Service
Connected to an ASCII terminal
Connected to the serial interface of a
local PC running terminal emulation
software
Command line interface (CLI)
II. AUX port
Table 1-4 Attributes of the AUX port
Item Description
Connector
RJ-45
Interface standard
RS-232
Baud rate 1,200 bps to 115,200 bps
Service
Modem dialup
Backup
III. Ethernet interfaces
The H3C SecPath F100-A firewall provides seven 10/100 Mbps autosensing Ethernet
interfaces. Their attributes are described in
Table 1-5.
Table 1-5 Attributes of the Ethernet interfaces
Item Description
Connector
RJ-45
Installation Manual
H3C SecPath F100-A Firewall Chapter 1
Product Overview
1-6
Item Description
Interface type
Both LAN and WAN interfaces support
auto-MDI/MDIX.
Frame format
Ethernet_II
Ethernet_SNAP
Operating mode
10/100 Mbps autosensing
Half/full duplex
Installation Manual
H3C SecPath F100-A Firewall Chapter 2
Installation Preparations
2-1
Chapter 2 Installation Preparations
2.1 General Site Requirements
The H3C SecPath F100-A firewall must be used indoors. To guarantee normal
operation and longevity of your device, its installation site should meet the
requirements described in this chapter.
2.1.1 Temperature and Humidity
The equipment room must maintain proper humidity to prevent poor insulation,
electricity creepage and corrosion accompanying high humidity, or washer contraction
and electrostatic discharge accompanying low humidity. In dry environments where the
relative humidity is very low, electrostatic discharge (ESD) is more likely to happen
causing the complementary metal-oxide-semiconductor (CMOS) circuitry to fail.
Table 2-1 lists the temperature and humidity requirements.
Table 2-1 Temperature/humidity requirements in the equipment room
Temperature Relative humidity
0°C to 40°C (32°F to 104°F)
10% to 90% (noncondensing)
2.1.2 Cleanliness
Dust is hazardous to the operating safety of your device. Dust buildup on the chassis
may result in static absorption, causing poor contact of metal components or points.
When indoor humidity is extremely low, this is more likely to happen to shorten the
useful life of the device and cause communication failures.
The equipment room must be free of explosion hazards and the electrical and magnetic
conductible dust as well. The following table lists the limits on dust particles:
Table 2-2 Limits on the dust particles in the equipment room
Mechanical active
material
Unit Content
Dust particle
Particle/m³
≤ 3 × 10
4
(No visible dust on desk in three days)
Note: Dust particles diameter = 5µm
Installation Manual
H3C SecPath F100-A Firewall Chapter 2
Installation Preparations
2-2
Besides, the equipment room should meet the rigorous limits on salt, acid and sulfide to
eliminate corrosion and premature aging of some parts, as shown in the
Table 2-3.
Table 2-3 Harmful gas limits in the equipment room
Gas Max content (mg/m3)
SO
2
0.2
H
2
S 0.006
NH
3
0.05
Cl
2
0.01
2.1.3 ESD Prevention
By design, the H3C SecPath F100-A firewall is ESD preventative, but excessive
buildup of static electricity can still damage the card circuitry and even the entire device.
On the communication network connected to the firewall, static electricity is primarily
introduced from the outside electrical fields, such as the outdoor high-voltage power
cabling and lightning, and from the inside system, such as indoor environment, floor
material and the equipment frame. To avoid damage, ensure that:
z The device is well grounded.
z The equipment room is dust-proof.
z Maintain adequate temperature and humidity.
z Wear an ESD-preventive wrist strap and clothes when contacting the circuit board.
z Place the removed circuit board upward on the ESD-preventive workbench, or into
a static shielded bag.
z Hold the circuit board by its edge when observing or moving it, avoiding direct
contact with the elements on it.
2.1.4 Electromagnetic Compatibility
All interference sources, from the outside or from the inside of the device/application
system, adversely affect the device in the conduction patterns of capacitance coupling,
inductance coupling, electromagnetic wave radiation, and common impedance
(including grounding system) coupling. To prevent the interference, do the following:
z Take effective measures against interference from the power grid.
z Use a separate grounding system or lightning protection grounding from that for
the power supply equipment and keep them as far as possible.
z Keep the device far away from strong power wireless launchers, radar launchers
and high frequency and high-current equipment.
z Use electromagnetic shielding when necessary.
Installation Manual
H3C SecPath F100-A Firewall Chapter 2
Installation Preparations
2-3
2.1.5 Lightning Protection
By design, the H3C SecPath F100-A firewall is lightning protective; but excessive
lightning may still damage the device. To protect the device better, you are
recommended to:
z Ensure the grounding screw of the chassis is securely connected to the earth
ground.
z Ensure the earth point of the power socket is securely connected to the earth
ground.
z Add a lightning arrester onto the front end of the power input to better protect the
power supply from lightning strikes.
2.1.6 Checking the Rack
When installing the H3C SecPath F100-A firewall, observe the following:
z Reserve adequate clearance at the air inlet and exhaust for adequate ventilation
inside the chassis.
z The rack has a good ventilation system.
z The rack is stable enough to support the weight of the device and the installation
accessories.
z The rack is well-grounded.
2.2 Safety Precautions
When reading this manual, pay adequate attention to the following.
Warning appears in operation procedures that, if performed incorrectly, might
cause bodily injury to the operators or damage the device.
Caution appears throughout this manual in procedures that, if performed
incorrectly, might affect the operation of the device.
When installing or using on the firewall, you are recommended to:
z Keep the firewall far away from the heat sources and water/liquid.
z Make sure that the firewall has been correctly grounded.
z Wear an ESD-preventive wrist strap in installation and maintenance, making sure
that the strap has good skin contact.
z Do not hot swap the console cable or AUX cable.
z Adopt uninterrupted power supply (UPS).
Installation Manual
H3C SecPath F100-A Firewall Chapter 2
Installation Preparations
2-4
2.3 Unpacking Inspections
Check the arrived shipment contents against the packing list, making sure all the items
are included and in good condition. Contact your agent for shortage or wrong delivery.
2.4 Installation Tools, Meters and Equipment
I. Tools
z Phillips screwdriver
z ESD-preventive wrist strap
z Static shielding bag
II. Cables
z Grounding wire and power cord
z Console cable
z Optional cables
III. Meters and other equipment
z Hub or LAN switch
z Console terminal (or a PC)
z Multimeter
Note:
The firewall is not shipped with any installation tools, meters, or equipment. You must
prepare them yourself.
Installation Manual
H3C SecPath F100-A Firewall Chapter 3
Firewall Installation
3-1
Chapter 3 Firewall Installation
3.1 Installation Flow
Normal?
Install the device to
the specified location
Connect PGND wire
Connect power cord
Connect the device to
console terminal
Check
Power on
Power off and disconnect
the power cord
Install MIM (optional)
Connect device to Ethernet
Connect the power
cord/power on
Check
End
Power off
Troubleshooting
No
Yes
Start
Install cabinet (optional)
Figure 3-1 Installation flow for the firewall
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
/