Noble House 305774 is a versatile piece of furniture that can be used as both a chair and a table. With its sturdy construction and stylish design, this product is perfect for any home or office.
As a chair, the Noble House 305774 provides a comfortable and supportive seat. The backrest and seat cushion are made of high-quality materials, and the chair is adjustable to ensure a perfect fit.
As a table, the Noble House 305774 offers a sturdy and spacious surface for working, dining, or other activities. The table is made of durable materials and is easy to clean.
Noble House 305774 is a versatile piece of furniture that can be used as both a chair and a table. With its sturdy construction and stylish design, this product is perfect for any home or office.
As a chair, the Noble House 305774 provides a comfortable and supportive seat. The backrest and seat cushion are made of high-quality materials, and the chair is adjustable to ensure a perfect fit.
As a table, the Noble House 305774 offers a sturdy and spacious surface for working, dining, or other activities. The table is made of durable materials and is easy to clean.
Assembly Instructions
CHAIR
Caution: You must read this before you proceed
CAUTION : This Chair is NOT a TOY.
Keep your child / children at bay during the assembly process.
For turning the Chair and to prevent damage to the Chair, 02 persons may be needed
to execute this action.
Assembly Instructions
Noble House Home Furnishings LLC
1/7
No. Picture Description QTY
A Backrest Panel 1
B Right Leg Panel 1
C Left Leg Panel 1
D Seat Panel 1
E Seat Cushion 1
No. Picture Description QTY
① Allen Key 1
② Screw (M6*60mm) 7
Parts List
Hardware
Noble House Home Furnishings LLC
1/7
2/7
Assembly Preparation
This Chair has multiple parts and may require up to 30 minutes to assemble. To give you an
overview of the Chair parts, the above picture is to help you put the various parts into perspective.
Please read through the instructions below to familiarise yourself with the parts and steps before
assembly.
Before Beginning Assembly:
Assembly Steps
Overview
Front Facing
Right Leg Panel (B)
Left Leg Panel (C)
Backrest Panel (A)
Seat Cushion (E)
Seat Panel (D)
Noble House Home Furnishings LLC
1/7
3/7
Unpack and place all parts on a clean, non-marring surface.
2.1) Align Backrest Panel (A) and Seat Panel (D) onto Left Leg Panel (C) as shown above.
2.2) Align Right Leg Panel (B) onto Backrest Panel (A) and Seat Panel (D) as pictured.
Noble House Home Furnishings LLC
4/7
Carefully turn the Chair over.
Attach Left Leg Panel (C) to Seat Panel (D) and Backrest Panel (A) by using 3 Screws (②) with
Allen Key (①).
Do not fully tighten the Screws.
Attach Right Leg Panel (B) to Seat Panel (D) and Backrest Panel (A) by using 3 Screws (②) with
Allen Key (①).
Do not fully tighten the Screws.
Noble House Home Furnishings LLC
5/7
Place Seat Cushion (E) onto the Chair.
Lay the Chair down and tie the velcro straps of the Cushion (E) to the Seat Panel (D) as shown
above.
Your Chair is ready for use.
This Chair can only be used on a flat, level surface.
Step 6
Step 5
Place the Chair onto a level surface, then carefully sit onto the Chair.
This pressure will help the Chair reach full alignment at all joints.
In a sequential manner, gradually tighten all Screws until evenly secured.
Inspect the Chair and make sure all parts are adequately connected.
Noble House Home Furnishings LLC
6/7
Noble House Home Furnishings LLC
7/7
TABLE
CAUTION : This Table is NOT a TOY.
Keep your child / children at bay during the assembly process.
For moving the Table and to prevent damage to the Table, two adults are
needed to execute this action.
Caution: You must read this before you process
Label Picture
Description
QTY
①
②
③
④
⑤
Short Bolts (M8x55mm)
Sleeve Nut (M8x20mm)
Long Bolts (M6x90mm)
Screw (M7x45mm)
Allen key
5
5
2
9
2
5
Iron washer
A
B
C
D
E
1
1
1
1
1
Label
Picture
Description
QTYLabel
Table Top
First Leg Frame (with
Leveler)
Second Leg Frame (with
Leveler)
Lower Cross Block
Upper Cross Block
6
Before Beginning Assembly:
This Table has multiple parts and may require up to 30 minutes to assemble. To give you an
overview of the Table parts, the above picture is to help you put the various parts into perspective.
Please read through the instructions below to familiarise yourself with the parts and steps before assembly.
Table Top (A)
Second Leg
Frame (C)
First Leg
Frame (C)
Lower Cross Block (D)
Upper Cross Block (E)
FRONT FACING
Step 1
Unpack and place all parts on a clean, non-marring surface.
With the assistance of your partner, position the First Leg Frame(B) to the
Second Leg Frame © as picture above.
Secure First Leg Frame(B) with the Second Leg Frame (C) by using
Long Bolt ( ) and Allen Key ( ).③ ⑤
. Note: This step, legs with leveler will be upside down
Do not fully tighten the Bolts.
Step 2
c
B
B
c
Step 3
With the assistance of your partner, position the Lower Cross Block (D) onto
the Leg Frames in Step 2. Secure by using Screws ( ) and the Allen Key ( ).④ ⑤
Do not fully tighten the Screws.
Step 4
With the assistance of your partner, turn Leg Frame in step 3 180 degree.
Position the Upper Cross Block (E) onto the Leg Frame as picture above.
Secure by using Screws ( ) and the Allen Key ( ).④ ⑤
Do not fully tighten the Screws.
D
E
Step 5
Place Table top (A) with its underside skywards onto a clean, soft surface
to avoid any scratch or damage to the product.
Position Leg Frame in step 4 onto Table Top (A)
Using two Short Bolts ( ), two Sleeve Nuts ( ), two Iron Washer ( ) and 5.1)
① ②
⑥
Allen Key ( ) to connect middle support bar of Table Top (A) and Leg Frame (B & C).
⑤
Using two Short Bolts( ), two Sleeve Nuts ( ), two Iron Washer ( ) and 5.2)
① ②
⑥
Allen Key ( ) to connect side support bar of Table Top (A) and Leg Frame (B & C).
⑤
Do not fully tighten the Bolts.
Step 6
With assistance from your adult partners, turn the Table back to normal flat
ground
EXERT pressure, floorwards, onto the Table.
This pressure will help the Legs and Table Top reach alignment at all joints.
Check for wobbles.
In a sequential manner, gradually tighten all Screws and Bolts until evenly
secured.
Inspect the Table and make sure all parts are adequately connected.
Your Table is ready for use.
This Table can only be used on a flat, level surface.
LEVELER
STEP 5.1 STEP 5.2
Questions & Answers about Proposition 65
·
What is Proposition 65?
Proposition 65 requires businesses to provide warnings to Californians about significant
exposures to chemicals that cause , birth defects or other . These
chemicals can be in the products that Californians purchase, in their homes or workplaces, or
that are released into the environment. By requiring that this information be provided,
Proposition 65 enables Californians to make informed decisions about their exposures to these
chemicals.
Proposition 65 also prohibits California businesses from knowingly discharging significant
amounts of listed chemicals into sources of drinking water.
Proposition 65 requires California to publish a list of chemicals known to cause , birth
defects or other . This list, which must be updated at least once a year, has
grown to include approximately 900 chemicals since it was first published in 1987.
What types of chemicals are on the Proposition 65 list?
The list contains a wide range of naturally occurring and synthetic chemicals that include
additives or ingredients in pesticides, common household products, food, drugs, dyes, or
solvents. Listed chemicals may also be used in manufacturing and construction, or they may be
byproducts of chemical processes, such as motor vehicle exhaust.
What does a warning mean?
If a warning is placed on a product label or posted or distributed at a workplace, a business, or
in rental housing, the business issuing the warning is aware or believes that it is exposing
individuals to one or more listed chemicals.
By law, a warning must be given for listed chemicals unless the is low enough to pose
no significant risk of or is significantly below levels observed to cause birth defects or
other .
Where can I get more information on Proposition 65?
If you have specific questions on the administration or implementation of Proposition 65, you
can contact OEHHA's Proposition 65 program at , or by phone at
(916) 445-6900.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
Noble House 305774 is a versatile piece of furniture that can be used as both a chair and a table. With its sturdy construction and stylish design, this product is perfect for any home or office.
As a chair, the Noble House 305774 provides a comfortable and supportive seat. The backrest and seat cushion are made of high-quality materials, and the chair is adjustable to ensure a perfect fit.
As a table, the Noble House 305774 offers a sturdy and spacious surface for working, dining, or other activities. The table is made of durable materials and is easy to clean.
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Noble House 306669 Operating instructions
-
Noble House 11309 Operating instructions
-
Noble House 41861 Operating instructions
-
Noble House 41496 Operating instructions
-
Noble House 9748 Operating instructions
-
Noble House 301120 User guide
-
Noble House 305583 Operating instructions
-
Noble House 41892 Operating instructions
-
Noble House 54454 Operating instructions
-
Noble House 41648 Operating instructions
Other documents
-
Patio Festival PF19105-B Operating instructions
-
-
LOKATSE AC18803G User guide
-
HONEY JOY TOPB003106 User manual
-
Furniture of America IDF-3411WH-SC Installation guide
-
Crosley Furniture KO10004WH Operating instructions
-
Furniture of America IDF-4164E Installation guide
-
MODWAY EEI-1104-BLK Installation guide
-
Carolina Cottage 3048CHETBK Installation guide
-
