Furniture of America IDF-3411WH-SC Installation guide

For more information contact our team: [email protected]

Align connecting bar (#4) to the holes

of the left and right side frames (#2,3),

then secure by using bolts (#A).

DO NOT TIGHTEN ALL BOLTS UNTIL ASSEMBLY IS COMPLETED

Align side frames to the holes of the chair back (#1),

then secure by using bolts (#A).

Align seat (#5) to the frame of the

chair, then secure by using screws (#C).

There will be no pre-drilled holes on

the seat (#5).

ASSEMBLY COMPLETED