ASSEMBLY INSTRUCTIONS
JJ
Connect chair back (A) with seat base (B) and armrests (C and D).
M6*30 bolts (I) are used. Please do not tighten bolts to the end at this step.
Connect chair seat support beams (G) with backrest (C and D).
M6*15 bolts (H) are used. Please do not tighten bolts to the end at this step.
Connect chair seat support frame (E) with seat base (B). M8*20 bolts (J) are used.
Please tighten bolts to the end at this step.
Insert the assemblied chair seat part into swivel base (F).
Stick the hook & loop velcro
of backrest and seat board.
Finish and enjoy your chair.
STEP 1
STEP 2
STEP 3
STEP 4
STEP 5
A
B
C
D
E
F
G
H
I
J
K
L
1
1
1
1
1
1
2
8
8
4
1
1
M6*15
M6*30
M8*20
Part # Reference Image QTY
A
C
B
I
D
I
G
HH
E
F
ASSEMBLY TIPS: Please use the hardware and accessories included in the set. DO NOT use other electrical or manual tools.
In order to facilitate the assembly and make your final product firm and stable, please tighten by a few rounds each screw one by one.
The assembly requires minimal level of DIY skills if you follow the instructions carefully. In case you encounter any difficulty or have any questions, feel free to contact
the store or manufacturer.
-
1
-
2
Patio Festival PF19105-B Operating instructions
- Type
- Operating instructions
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
-
Patio Festival PF19105-106-106-222-G User guide
-
-
-
-
-
-
-
-
-