Halo H99TAT-6PK Specification

Halo
Brand
Halo
Model
H99TAT-6PK
Type
Specification

This manual is also suitable for

S
P E C I F I C A T I O N F E A T U R E S
HALO
®
D E S C R I P T I O N
The H99TAT is a small aperture Non-IC AIR-TITE™ housing for
providing accent and task lighting. The H99T is designed for use
in non-insulated ceiling or for insulated ceilings but insulation
MUST be kept 3” from all sides of the housing. Non-IC Housing is
AIR-TITE™ but insulation must be kept 3 inches away from all
sides of housing.
H o u s i n g
Formed of CRS with powder
coat finish.
P l a s t e r F r a m e
• Galvanized steel die-formed
construction.
• The inner housing can be
removed from plaster frame to
provide access to the junction
box.
• Plaster frame features include:
- Patented regressed locking
screw positioned for
securing hanger bars
from below the ceiling.
- Cutouts for easily crimping
hanger bars in position.
- AIR-TITE aperture gasket is
pre-installed.
- HALO identity embossed on
plaster frame
S L I D E - N - S I D E ™ J u n c t i o n
B o x
• Positioned to accommodate
straight conduit runs
• Four 1/2” trade size conduit
knockouts with true pry-out
slots
• Slide-N-Side wire traps allow
non-metallic sheathed cable to
be installed without tools and
without removing knockouts.
• Accepts a wide range of
non-metallic (type NM)
sheathed cables - the standard
cable types used in lighting in
both U.S. and Canada.
- Allows wiring connections to
be made outside the junction
box.
- Simply insert the cable
directly into the trap after
connections are made.
- Accommodates the following
standard non-metallic
sheathed cable sizes:
(US) #14/2, #14/3, #12/2, #12/3
(Canada) #14/2, #14/3, #12/2
“ Q u i c k C o n n e c t ”
C o n n e c t o r s
Three quick connect wiring
connectors included.
G O T N A I L ! P a s s - N -
T h r u ™ B a r H a n g e r s
• Pre-installed nail easily installs in
regular lumber, engineered
lumber and laminated beams.
• Safety and guidance system
prevents snagging, ensures
smooth straight nail penetration
and allows bar hangers to be
easily removed if necessary.
• Automatic levelling flange aligns
the housing and lets you hold
the housing in place with one
hand while driving nails.
• Housing can be positioned at
any point within 24” joist span.
• Pass-N-Thru™ feature allows
bar hangers to be shortened
without removing from plaster
frame.
• Score lines allow “tooless”
shortening for 12” joists.
• Bar hangers may be
repositioned 90°.
• Integral T-bar clip snaps onto
T-bars - no additional clips
required.
S o c k e t
Fixed position porcelain socket
with nickel plated brass screw
shell provides consistent lamp
positioning.
T h e r m a l P r o t e c t o r
Thermal protector deactivates
fixture if overheating occurs due
to improper lamping or
misapplied insulation.
L a b e l s
• UL/cUL Listed 1598 Luminaire
• UL/cUL Damp Location Listed
• UL/cUL Listed for Wet
Location, covered ceiling -
with select trims
• UL/cUL Listed for Feed
Through
• Certified Under ASTM-E283 for
air tight construction
• IP rated (Improper Lamp)
8 inch
(203 mm)
5-1/4 inch
(133 mm)
1/2 inch
(13 mm)
5 inch
(127 mm)
4-3/8
(111 mm)
Ceiling opening
H99TAT
4" Non-Insulated
Ceiling
AIR-TITE™ Recessed
Housing
4 " T R I M S
F O R U S E I N
N O N I N S U L A T E D
C E I L I N G S
O R
I N S U L A T E D C E I L I N G S
W H E R E I N S U L A T I O N
C A N B E K E P T 3 "
F R O M A L L S I D E S O F
F I X T U R E
Catalog #
Project
Comments
Type
Prepared by
Date
ADV110469
3/11/11
Slide-N-Side
™
Pass-N-Thru
™
Pass-N-Thru
™
™
H
9 9 T A T
T R I M S
Note: Specifications and Dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX 770 486.4801 ADV110469
Cooper Lighting 5925 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX 905.568.7049
O
R D E R I N G I N F O R M A T I O N
S A M P L E N U M B E R : H 9 9 T A T - 9 9 9 P
O
r d e r h o u s i n g a n d t r i m s s e p a r a t e l y .
H99TAT= 4" Non-Insulated Ceiling
Small Aperture AIR-TITE
Housing
T
r i m s
H
o u s i n g
Reflector Cone
4
0W R16, 50W R20, 50W PAR20
999P=Specular Clear, White Trim Ring
999AC=Antique Copper with Antique
Copper Trim Ring
999RG=Residential Gold, white trim ring
999W=White Reflector, White Trim Ring
999H=Haze Reflector, White Trim Ring
999MB=Specular Black Reflector, White
Trim Ring
999SN=Satin Nickel Reflector with Satin
Nickel Trim Ring
999TBZ=Tuscan Bronze Reflector with
Tuscan Bronze Trim Ring
O
D: 5 1/16" (129mm)
REFLECTORS
999
C
oilex Baffle with Die Cast Trim Ring
40W R16, 50W R20, 50W PAR20
993P=Black Baffle with White Trim Ring
993AC=Black Baffle with Antique
Copper Trim Ring
9
93PB=Black Baffle with Polished Brass
Trim Ring
993W=White Baffle with White Trim Ring
993SN=Black Baffle with Satin Nickel
Trim Ring
9
93TBZ=Black Baffle with Tuscan Bronze
Trim Ring
OD: 5 1/16" (129mm)
BAFFLES
993
Eyeball - 30° Tilt
40W R16, 60W PAR16
9
98P=White Eyeball
998AC=Antique Copper Eyeball
998PB=Polished Brass Eyeball
998SN=Satin Nickel Eyeball
998TBZ=Tuscan Bronze Eyeball
O
D: 5 1/16" (129mm)
9
98
Eyeball - 15° Tilt
50W PAR20
996P=White Eyeball
996AC=Antique Copper Eyeball
9
96SN=Satin Nickel Eyeball
996TBZ=Tuscan Bronze Eyeball
OD: 5 1/16" (129mm)
ADJUSTABLES
996
O
PEN
Metropolitan Ice Light
5
0W PAR20, 50W R20
9
45=Clear Frosted
945BLUE=Blue Frosted
OD: 5 5/16" (135mm)
945
WALL WASH
W
all Wash with Baffle
40W R16, 40W A19, 50W R20
992P=White Scoop and Trim Ring,
Black Baffle
992AC=Antique Copper, Scoop and
Trim Ring, Black Baffle
992W=White Scoop and Trim Ring,
White Baffle
992SN=Satin Nickel Scoop and Trim
Ring, Black Baffle
9
92TBZ=Tuscan Bronze Scoop and
Trim Ring, Black Baffle
OD: 5 1/16" (129mm)
992
Metropolitan Deco
50W PAR20, 50W R20
946BC=Green Tint Rings with
Black Chrome Metal Body
946PB=Green Tint Rings with
Polished Brass Metal Body
OD: 5 5/8" (143mm)
946
SHOWER LIGHT
Shower Light, Full Reflector
4
0W A19, 50W PAR20, 50W R20
951PS=Shower Light, White Trim Ring,
Glass Lens
951ACS=Shower Light, Antique Copper
Trim Ring, Glass Lens
9
51SNS=Shower Light, Satin Nickel Trim
Ring, Glass Lens
951TBZS=Shower Light, Tuscan Bronze
Trim Ring, Glass Lens
OD: 5 1/16" (129mm)
951
Shower Light, Cone Reflector
40W A19, 50W PAR20, 50W R20
955PS=Shower Light, White Trim Ring,
Glass Lens
955
Pinhole Trim
40W A19, 40W R16, 50W PAR20,
50W R20
990P=White Die Cast Trim
990AC=Antique Copper Die
Cast Trim
990SN=Satin Nickel Die Cast
Trim
990TBZ=Tuscan Bronze Die
Cast Trim
OD: 5 1/16" (129mm)
990
Metal Baffle with Die Cast Trim Ring
40W R16, 50W R20, 50W PAR20
953P=Black Baffle with White Trim Ring
953W=White Baffle with White Trim Ring
953AC=Antique Copper Baffle with Antique
Copper Trim Ring
953SN=Satin Nickel Baffle with Satin Nickel
Trim Ring
953TBZ=Tuscan Bronze Baffle with Tuscan
Bronze Trim Ring
OD: 5 1/16" (129mm)
Metal Baffle with Die Cast Trim Ring
40W R16, 50W R20, 50W PAR20
953P=Black Baffle with White Trim Ring
953W=White Baffle with White Trim Ring
953AC=Antique Copper Baffle with Antique
Copper Trim Ring
953SN=Satin Nickel Baffle with Satin Nickel
Trim Ring
953TBZ=Tuscan Bronze Baffle with Tuscan
Bronze Trim Ring
OD: 5 1/16" (129mm)
953
Full Cone Metal Baffle
40W A19, (50W R20 - ERT413WHT only),
50W PAR 20
ERT413WHT=High Gloss Appliance White Trim
Ring with White Baffle
ERT413=High Gloss Appliance White Trim
Ring with Black Baffle
OD: 5 1/16" (129mm)
Full Cone Metal Baffle
40W A19, (50W R20 - ERT413WHT only),
50W PAR 20
ERT413WHT=High Gloss Appliance White Trim
Ring with White Baffle
ERT413=High Gloss Appliance White Trim
Ring with Black Baffle
OD: 5 1/16" (129mm)
ERT413
Frosted Dome Lens Shower Light,
Cone Reflector
40W A19, 50W PAR20, 50W R20
952PS=White Trim Ring, Dome Lens
Shower Light
952
  • Page 1 1
  • Page 2 2

Halo H99TAT-6PK Specification

Halo
Brand
Halo
Model
H99TAT-6PK
Type
Specification
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents