Balboa Decorative Escutcheon Installation guide

DECORATIVE ESCUTCHEON

INSTALLATION INSTRUCTIONS

REMOVE THE EXISTING PLASTIC EYEBALL AND RETAINING RING. 1.

PLACE THE O-RING IN THE HOLE FROM WHICH THE PLASTIC EYEBALL CAME. 2.

PLACE THE EYEBALL ON TOP OF THE O-RING. 3.

CENTER THE ESCUTCHEON PLATE OVER THE FACE OF THE WALL FITTING, AND TIGHTEN 4.

UNTIL SNUG.

CAUTION: DO NOT USE ABRASIVE OR CAUSTIC CLEANSERS ON DECORATIVE ESCUTCHEONS

AS THEY WILL DAMAGE THE FINISH AND VOID THE WARRANTY.

88-4024 Rev A June 30, 2009