KU171/KU173
USB 3-4
USB 3.0
Nuvoton
NCT6106D
USB 1-2
USB 3.0
Intel
I210AT
Line-out
DC-in
4-pin Vertical Type (optional)
4-pin
Right Angle
(optional)
2
1
39
40
LVDS LCD Panel
LVDS Panel Power
Select (JP6)
12
56
PTN3460
1
2
5
6
SMBus
1
Digital I/O
Power
1
2
1
13
14
LPC
LCD/Inverter
Power Select
(JP8)
LCD/Inverter Power
SPI Flash BIOS
1
eDP (optional)
29
302
1
6
5
1
2
eDP Backlight Power
Select (JP2) (optional)
eDP Panel Power
Select (JP1) (optional)
eDP Inverter Power
Select (JP3) (optional)
1
1
COM 1 COM 2
1
2
9
1
2
9
6
51
2
Buzzer
1
S/PDIF
Standby
Power LED
1
System
Fan 2
PCIe 1 (PCIe x4)
M.2 M Key
Mini PCIe
USB 8-9USB 6-7
1
2
10
1
210
USB 2.0
1
2
11
12
Front Panel
1
System Fan 1
1
1
Chassis
Intrusion
Clear CMOS (JP4)
1
1
2
Battery
Intel
BGA 1356
DDR4_1 SODIMM
DDR4_2 SODIMM
1
CPU Fan
SATA Power 0
1
4
1
4
LVDS Backlight Power Select (JP7)
DP++ 1
DP++ 2
LAN 1
LAN 2
Mic-in
Digital I/O
SATA Power 1
COM 1 RS232/Power
Select (JP5)
SATA 0-1
SATA 3.0
Auto Power-on
Select (JP9)
1
Flash Descriptor Security
Override
1
1
Note:
1. KU171: Single 12V +/-10% DC.
2. KU173: Wide Range 9~36V.
3. The eDP connector is optional. Please contact your sales
representative for more information.
4. JP1, JP2 and JP3 will work when the eDP connector is populated
on the system board.
Clear CMOS JP4
Normal (default) 1-2 On
Clear CMOS 2-3 On
LVDS Panel Power Select JP6
+12V 1-2 On
+5V 3-4 On
+3.3V (default) 5-6 On
LCD/Inverter Power Select JP8
+12V (default) 1-2 On
+5V 2-3 On
COM 1 RS232/Power Select JP5
RS232 (default) 1-3 (RI-), 2-4 (DCD-) On
RS232 with power 3-5 (+5V), 4-6 (+12V) On
Auto Power-on Select JP9
Power-on via power button (default) 1-2 On
Power-on via AC power 2-3 On
LVDS Backlight Power Select JP7
+3.3V (default) 1-2 On
+5V 2-3 On
eDP Panel Power Select (optional) JP1
+12V 1-2 On
+5V 3-4 On
+3.3V (default) 5-6 On
eDP Inverter Power Select (optional) JP3
+12V (default) 1-2 On
+5V 2-3 On
eDP Backlight Power Select (optional) JP2
+3.3V (default) 1-2 On
+5V 2-3 On
A46601836
www.dfi .com
The lithium ion battery powers the real-time clock and CMOS
memory. It is an auxiliary source of power when the main
power is shut off.
• Danger of explosion if battery incorrectly replaced.
• Replace only with the same or equivalent type recommend-
ed by the manufacturer.
• Dispose of used batteries according to local ordinance.
• Danger d’explosion si la batterie n’est pas correctement
remplacée.
• Remplacez seulement avec le même type ou équivalent
recommandé par le fabricant.
• Traitez des batteries usées selon le règlement local.
Battery Usage
Safety Measures
Mesure de Sécurité de l’usage de Batterie
Battery Notice
/
