Aaeon OMNI-3175-SKU User manual

Last Updated: September 2, 2019

OMNI-SKU Series

Industrial Modular Touch Panel PC

With 6

th

Gen. Intel® Core™ Processor

(Formerly code name: Skylake)

User’s Manual 5

th

Ed

Preface II

Industrial Modular Touch Panel

PC

OMNI

-

SKU

Series

Copyright Notice

This document is copyrighted, 2019. All rights are reserved. The original manufacturer

reserves the right to make improvements to the products described in this manual at

any time without notice.

No part of this manual may be reproduced, copied, translated, or transmitted in any

form or by any means without the prior written permission of the original

manufacturer. Information provided in this manual is intended to be accurate and

reliable. However, the original manufacturer assumes no responsibility for its use, or for

any infringements upon the rights of third parties that may result from its use.

The material in this document is for product information only and is subject to change

without notice. While reasonable efforts have been made in the preparation of this

document to assure its accuracy, AAEON assumes no liabilities resulting from errors or

omissions in this document, or from the use of the information contained herein.

AAEON reserves the right to make changes in the product design without notice to its

users.

Preface III

Industrial Modular Touch Panel

PC

OMNI

-

SKU

Series

Acknowledgement

All other products’ name or trademarks are properties of their respective owners.

 Microsoft Windows is a registered trademark of Microsoft Corp.

 Intel, Pentium, Celeron, and Xeon

are registered trademarks of Intel Corporation

 Core, Atom are trademarks of Intel Corporation

 ITE is a trademark of Integrated Technology Express, Inc.

 IBM, PC/AT, PS/2, and VGA are trademarks of International Business Machines

Corporation.

All other product names or trademarks are properties of their respective owners.

Preface IV

Industrial Modular Touch Panel

PC

OMNI

-

SKU

Series

Packing List

Before setting up your product, please make sure the following items have been

shipped:

Item

Quantity

OMNI-SKU Series Panel PC (panel size from 10.4 – 21.5”)

1

Product DVD

1

Phoenix Power Connector

1

If any of these items are missing or damaged, please contact your distributor or sales

representative immediately.

Preface V

Industrial Modular Touch Panel

PC

OMNI

-

SKU

Series

About this Document

This User’s Manual contains all the essential information, such as detailed descriptions

and explanations on the product’s hardware and software features (if any), its

specifications, dimensions, jumper/connector settings/definitions, and driver

installation instructions (if any), to facilitate users in setting up their product.

Users may refer to the AAEON.com for the latest version of this document.

Preface VI

Industrial Modular Touch Panel

PC

OMNI

-

SKU

Series

Safety Precautions

Please read the following safety instructions carefully. It is advised that you keep this

manual for future references

1. All cautions and warnings on the device should be noted.

2. All cables and adapters supplied by AAEON are certified and in accordance with

the material safety laws and regulations of the country of sale. Do not use any

cables or adapters not supplied by AAEON to prevent system malfunction or

fires.

3. Make sure the power source matches the power rating of the device.

4. Position the power cord so that people cannot step on it. Do not place anything

over the power cord.

5. Always completely disconnect the power before working on the system’s

hardware.

6. No connections should be made when the system is powered as a sudden rush

of power may damage sensitive electronic components.

7. If the device is not to be used for a long time, disconnect it from the power

supply to avoid damage by transient over-voltage.

8. Always disconnect this device from any AC supply before cleaning.

9. While cleaning, use a damp cloth instead of liquid or spray detergents.

10. Make sure the device is installed near a power outlet and is easily accessible.

11. Keep this device away from humidity.

12. Place the device on a solid surface during installation to prevent falls

13. Do not cover the openings on the device to ensure optimal heat dissipation.

14. Watch out for high temperatures when the system is running.

15. Do not touch the heat sink or heat spreader when the system is running

16. Never pour any liquid into the openings. This could cause fire or electric shock.

Preface VII

Industrial Modular Touch Panel

PC

OMNI

-

SKU

Series

17. As most electronic components are sensitive to static electrical charge, be sure

to ground yourself to prevent static charge when installing the internal

components. Use a grounding wrist strap and contain all electronic components

in any static-shielded containers.

18. If any of the following situations arises, please the contact our service personnel:

i. Damaged power cord or plug

ii. Liquid intrusion to the device

iii. Exposure to moisture

iv. Device is not working as expected or in a manner as described in

this manual

v. The device is dropped or damaged

vi. Any obvious signs of damage displayed on the device

19. DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH

TEMPERATURES BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES

(SEE CHAPTER 1) TO PREVENT DAMAGE.

Preface VIII

Industrial Modular Touch Panel

PC

OMNI

-

SKU

Series

FCC Statement

This device complies with Part 15 FCC Rules. Operation is

subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept

any interference received including interference that may

cause undesired operation.

Caution:

There is a danger of explosion if the battery is incorrectly replaced. Replace only with the

same or equivalent type recommended by the manufacturer. Dispose of used batteries

according to the manufacturer’s instructions and your local government’s recycling or

disposal directives.

Attention:

Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.

Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le

constructeur. Recycler les batteries usées en accord avec les instructions du fabricant et

les directives gouvernementales de recyclage.

Preface IX

Industrial Modular Touch Panel

PC

OMNI

-

SKU

Series

China RoHS Requirements (CN)

产品中有毒有害物质或元素名称及含量

AAEON System QO4-381 Rev.A0

部件名称

有毒有害物质或元素

铅

(Pb)

汞

(Hg)

镉

(Cd)

六价铬

(Cr(VI))

多溴联苯

(PBB)

多溴二苯醚

(PBDE)

印刷电路板

及其电子组件

X

○

外部信号

连接器及线材

X

○

外壳

○

中央处理器

与内存

X

○

硬盘

X

○

液晶模块

X

×

○

光驱

X

○

触控模块

X

○

电源

X

○

电池

X

○

本表格依据 SJ/T 11364 的规定编制。

○

：表示该有毒有害物质在该部件所有均质材料中的含量均在

GB/T 26572标准规定的限量要求以下。

×：表示该有害物质的某一均质材料超出了GB/T 26572的限量要求，然而该部件

仍符合欧盟指令2011/65/EU 的规范。

备注：

一、此产品所标示之环保使用期限，系指在一般正常使用状况下。

二、上述部件物质中央处理器、内存、硬盘、光驱、电源为选购品。

三、上述部件物质液晶模块、触控模块仅一体机产品适用。

Preface X

Industrial Modular Touch Panel

PC

OMNI

-

SKU

Series

China RoHS Requirement (EN)

Hazardous and Toxic Materials List

AAEON System QO4-381 Rev.A0

Component

Name

Hazardous or Toxic Materials or Elements

Lead

(Pb)

Mercury

(Hg)

Cadmium

(Cd)

Hexavalent

Chromium

(Cr(VI))

Polybrominated

biphenyls

(PBBs)

Polybrominated

diphenyl ethers

(PBDEs)

PCB and

Components

X

O

Wires &

Connectors for

Ext.Connections

X

O

Chassis

O

CPU & RAM

X

O

HDD Drive

X

O

LCD Module

X

O

Optical Drive

X

O

Touch Control

Module

X

O

PSU

X

O

Battery

X

O

This form is prepared in compliance with the provisions of SJ/T 11364.

O: The level of toxic or hazardous materials present in this component and its parts is below the

limit specified by GB/T 26572.

X: The level of toxic of hazardous materials present in the component exceed the limits specified

by GB/T 26572, but is still in compliance with EU Directive 2011/65/EU (RoHS 2).

Notes:

1. The Environment Friendly Use Period indicated by labelling on this product is applicable only

to use under normal conditions.

2. Individual components including the CPU, RAM/memory, HDD, optical drive, and PSU are

optional.

3. LCD Module and Touch Control Module only applies to certain products which feature these

components.

 
 
Preface    XI 
Industrial Modular Touch Panel
 
PC
 
 
 
OMNI
-
SKU
 
Series
 
Table of Contents 
 
Chapter 1 - Product Specifications .............................................................................................. 1 
1  Specifications ............................................................................................................... 2 
1.1  OMNI-3105-SKU ............................................................................................. 4 
1.2  OMNI-3125-SKU ............................................................................................. 6 
1.3  OMNI-3155-SKU ............................................................................................. 8 
1.4  OMNI-2155-SKU ........................................................................................... 10 
1.5  OMNI-3175-SKU ........................................................................................... 12 
1.6  OMNI-3195-SKU ........................................................................................... 14 
1.7  OMNI-2215-SKU ........................................................................................... 16 
2  OMNI Modules ......................................................................................................... 18 
2.1  USB/ COM/ LAN Module .......................................................................... 18 
2.2  Dual LAN Module ........................................................................................ 18 
2.3  MiniCard and SIM Card Module .............................................................. 19 
2.4  RS-232/422/485 Module ........................................................................... 19 
2.5  Isolated RS-232/422/485 Module .......................................................... 20 
2.6  Digital I/O Module ...................................................................................... 20 
2.7  CAN Bus Module ........................................................................................ 20 
2.8  Audio Module ............................................................................................... 21 
2.9  HMS Module ................................................................................................. 21 
2.10  COM x 4 + DIO x 16 Module .................................................................... 21 
Chapter 2 – Hardware Information .......................................................................................... 22 
1  Dimensions ............................................................................................................... 23 
1.1  Dimensions: Main Panels .......................................................................... 23 
1.2  Dimensions: OMNI Modules .................................................................... 24 
1.3  Dimensions: Cables .....................................................................................27 
2  List of Jumpers ......................................................................................................... 28 

 
 
Preface    XII 
Industrial Modular Touch Panel
 
PC
 
 
 
OMNI
-
SKU
 
Series
 
2.1  mSATA/Mini-Card Operating VCC Selection (JP1) .............................. 29 
2.2  Resistive Touch Mode (JP2) ...................................................................... 29 
2.3  LVDS Port Backlight Lightness Control Mode Selection (JP3) ......... 29 
2.4  LVDS Port Backlight Inverter VCC Selection (JP4) .............................. 29 
2.5  Auto Power Button Enable/Disable Selection (JP5) ........................... 30 
2.6  Clear CMOS (JP7) ........................................................................................ 30 
2.7  COM2 Pin8 Function Selection (JP9) ..................................................... 30 
2.8  COM1 Pin8 Function Selection (JP10) ..................................................... 31 
3  List of Connectors ................................................................................................... 32 
3.1  Front Panel Connector (JP6) .................................................................... 33 
3.2  Mini-Card Slot (Full-Mini Card) (CN2) ................................................... 33 
3.3  Touch Screen Connector (CN3) ............................................................... 35 
3.4  Micro SIM Card Socket (CN4) ...................................................................37 
3.5  eDP/LVDS Port (CN5) .................................................................................37 
3.6  LVDS Port Inverter / Backlight Connector (CN8) ................................ 40 
3.7  LPC Port (CN11) ............................................................................................ 41 
3.8  +5V Output for SATA HDD (CN12) .......................................................... 41 
3.9  SATA Port (CN13) ......................................................................................... 42 
3.10  BIOS Debug Port (CN14) ........................................................................... 42 
3.11  HDMI Connector (CN15) ........................................................................... 43 
3.12  USB 3.0 Ports (CN19) .................................................................................. 44 
3.13  Battery (CN20) ............................................................................................. 45 
3.14  CPU FAN (Optional) (CN21) ...................................................................... 45 
315.  LAN (RJ45) Connector (CN23) ................................................................ 45 
316.  External Power Input (CN25) .................................................................... 47 
3.17  COM Port 2 (CN26) .................................................................................... 47 
3.18  COM Port 1 (CN27) ..................................................................................... 48 
4  Assembling Modules ............................................................................................... 51 

 
 
Preface    XIII 
Industrial Modular Touch Panel
 
PC
 
 
 
OMNI
-
SKU
 
Series
 
5  Installing the Hard Disk Drive ............................................................................... 53 
6  Installing DRAM ....................................................................................................... 55 
7  Mount the OMNI onto the wall ........................................................................... 56 
8  Assemble the OMNI panel and the CPU Box .................................................. 58 
9  P-CAP Touch Screen Operating ........................................................................... 61 
Chapter 3 - AMI BIOS Setup ..................................................................................................... 62 
1  System Test and Initialization ............................................................................... 63 
2  AMI BIOS Setup ....................................................................................................... 64 
3  Setup Submenu: Main ........................................................................................... 65 
4  Setup Submenu: Advanced .................................................................................. 66 
4.1  Advanced: CPU Configuration .................................................................67 
4.2  Advanced: SATA Configuration ............................................................... 69 
4.3  Advanced: Hardware Monitor ..................................................................70 
4.4  Advanced: SIO Configuration ................................................................... 71 
4.4.1  SIO Configuration: Serial Port 1 Configuration ...........................72 
4.4.2  SIO Configuration: Serial Port 2 Configuration ...........................73 
4.5  Advanced: USB Configuration ................................................................. 74 
4.6  Advanced: Digital IO Port Configuration ...............................................75 
4.7  Advanced: Power Management ..............................................................76 
5  Setup submenu: Chipset ........................................................................................78 
5.1  Chipset: System Agent (SA) Configuration ...........................................79 
5.1.1  System Agent (SA) Configuration: Graphics Configuration .... 80 
5.1.1.1  Graphics Configuration: LVDS Panel Configuration ................... 81 
5.2  Chipset: PCH-IO Configuration ............................................................... 82 
6  Setup submenu: Security ...................................................................................... 83 
7  Setup submenu: Boot ............................................................................................ 84 
8  Boot: BBS Priorities ................................................................................................. 85 
9  Setup submenu: Save & Exit ................................................................................ 86 

Preface XIV

Industrial Modular Touch Panel

PC

OMNI

-

SKU

Series

Chapter 4 – Drivers Installation & Touchscreen Settings .................................................... 87

4.1 Product CD/DVD ..................................................................................................... 88

4.2 PCAP Dual Monitor Touch Settings .................................................................... 96

Appendix A - Watchdog Timer Programming ...................................................................... 98

A.1 Watchdog Timer Initial Program ......................................................................... 99

Appendix B - I/O Information .................................................................................................. 101

B.1 I/O Address Map .................................................................................................... 102

B.2 Memory Address Map .......................................................................................... 104

B.3 IRQ Mapping Chart ............................................................................................... 106

Appendix C – CANBus Utility (for CANBus Module) ........................................................... 119

C.1 CANBus Driver Installation .................................................................................. 120

C.2 CANBus Utility ......................................................................................................... 124

C.3 Mask and Filter Function ...................................................................................... 126

Appendix D –Electrical Specifications for I/O Ports ............................................................. 127

D.1 Digital I/O Register ................................................................................................ 128

D.2 Digital I/O Sample Program ................................................................................ 129

Industrial Modular Touch Panel

PC

OMNI

-

SKU

Series

Chapter 1

Chapter 1 - Product Specifications

Chapter 1 – Product Specifications 2

Industrial Modular Touch Panel

PC

OMNI

-

SKU

Series

1.1 Specifications

Specifications for System and Power Supply are same for all models/SKUs of OMNI-SKU

series. All other specifications are listed by SKU in the following sub-sections.

System

Processor

Intel® Core™ i5-6300U processor, 2.4 GHz

Intel® Celeron® 3955U processor, 2.0 GHz

System Memory

260-pin DDR4 SODIMM x 1, up to 16 GB

LCD/CRT Controller

Integrated in processor

Ethernet

Intel® I211, 10/100/1000Base-TX x 1

I/O Port

USB 3.0 Type A x 4

SMA Antenna hole x 1

HDMI x 1

DB-9 Type RS-232/422/485 x 2

RJ-45 Type 10/100/1000Base-TX x 1

3-pin terminal block x1 for 9~30 VDC power

input

LED Power on/off switch x1 (Power on =

Orange, Power off =N/A)

Storage Disk Drive

2.5" SATA HDD bay x 1

Expansion Slot

Full Size Mini card x 1

SIM card x 1

OMNI I/O connector x 1

Chapter 1 – Product Specifications 3

Industrial Modular Touch Panel

PC

OMNI

-

SKU

Series

System

OS support

Windows® 8.1

Windows® 10 (64 bit)

Linux Kernal 2.6.x or higher

Power Supply

DC Input

DC 9 (min.) ~ 30 (max.) V w/3-pin terminal

block, ATX Power function

Chapter 1 – Product Specifications 4

Industrial Modular Touch Panel

PC

OMNI

-

SKU

Series

1.1.1 OMNI-3105-SKU

Mechanical

Construction

Aluminum design (IP65 Front Frame)

Mounting

VESA 100/ Panel Mount

Dimension

11.02” x 9.41” x 2.87” (280mm x 239mm x 73 mm)

Carton Dimension

16.34" x 7.05" x 15.39" (415mm x 179mm x

391mm)

Gross Weight

8.82 lbs. (4 kg)

Environmental

Operating Temperature

-4°F ~ 131°F (-20°C ~ 55°C) with 0.5 m/s airflow

(Industrial Grade HDD )

Storage Temperature

-4°F ~ 158°F (-20°C ~ 70°C)

Storage Humidity

90% @40°C; non-condensing

Vibration

1 Grms/ 5~ 500Hz/ operation – with HDD

Shock

--

EMC

CE/FCC class A

Chapter 1 – Product Specifications 5

Industrial Modular Touch Panel

PC

OMNI

-

SKU

Series

LCD

Display Type

10.4" TFT-LCD, LED

Max Resolution

800(H) x 600(V)

Max. Colors

16.2M colors

Luminance

230 cd/m2

Viewing Angle

120 (H), 100 (V)

Back Light

LED

Back Light MTBF (Hours)

50,000

Touchscreen

Type

P-CAP/ 5-wire resistive

Light Transmission

P-CAP (90% ± 3%), 5-wire Resistive (80% ± 3%)

Chapter 1 – Product Specifications 6

Industrial Modular Touch Panel

PC

OMNI

-

SKU

Series

1.1.2 OMNI-3125-SKU

Mechanical

Construction

Aluminum design (IP65 Front Frame)

Mounting

VESA 100 / Panel Mount

Dimension

12.95” x 11.34” x 2.72” (329mm x 288mm x 69

mm)

Carton Dimension

20.87" x 17.52" x 7.87" (530mm x 445mm x

200mm)

Gross Weight

12.34 lbs. (5.6 kg)

Environmental

Operating Temperature

-4°F ~ 131°F (-20°C ~ 55°C) with 0.5 m/s airflow

(Industrial Grade HDD )

Storage Temperature

-4°F ~ 158°F (-20°C ~ 70°C)

Storage Humidity

90% @40°C; non-condensing

Vibration

1 Grms/ 5~ 500Hz/ operation – with HDD

Shock

--

EMC

CE/FCC class A

Page is loading ...

Aaeon OMNI-3175-SKU User manual

This manual is also suitable for

Aaeon OMNI-3175-SKU User manual

Related papers

Other documents