V1 ENGLISH 15-0324
3 Gently remove the black, exterior layer of the
umbrella, then fold it up and store it.
NOTE: To reinstall the black outer layer, reverse
this procedure.
ATTACHING YOUR UMBRELLA TO A LIGHT
STAND
Insert the base of your umbrella shaft into the
umbrella socket, then tighten the screw to
secure it. Point the ash at the center of the
umbrella. Then aim for best lighting.
NOTE: Light stand, ash, and bracket not included.
SPECIFICATIONS
• Warranty: 12 months parts & labor
• Dimension (diameter): 33 in (84 cm)
• Shaft diameter: 0.3 in.
• Weight: 0.56 lb (0.25 kg)
ONEYEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and Canada)
or
01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its aliated companies.
Registered in some countries.
Distributed by Best Buy Purchasing, LLC
7601 Penn Ave South, Richeld, MN 55423 U.S.A.
©2015 Best Buy. All rights reserved.
Made in China
Black exterior
Umbrella
shaft
NS-DU33DL_15-0324_QSG_V1_EN_Final.ai 2 4/8/2015 3:21:49 PMNS-DU33DL_15-0324_QSG_V1_EN_Final.ai 2 4/8/2015 3:21:49 PM