Adapter Kit For 1-3/4” Thick Doors
Installation Instructions
I-SD00433
Rev -, Rev Date: 01/21/21
Always visit www.hagerco.com for the latest Installation Instructions
HAGER COMPANIES 139 Victor Street, St. Louis, MO 63104 • (800) 325-9995
Page 1 of 1
Contents:
Qty:
1. Wider Floor Plates
3
2. Shim
6
This kit is included in the 9850HD Pocket Door Kits. It gives additional clearance for 1-3/4” thick doors.
1 Replace Floor Plates
Figure 1
2 Apply Spacers
Figure 2
• Discard the standard floor plates that came with the pocket
door kit
• Replace it with the wider floor plates included in this kit
• Peel the paper off the 1/8” shim
• Stick it to the top of each split jamb covering the slots
• Follow the rest of the installation instructions included with
the pocket door kit
1.
2.
/
