Equinox Systems EQLED66 User manual

Equinox Systems
Brand
Equinox Systems
Model
EQLED66
Category
Stroboscopes & disco lights
Type
User manual

This manual is also suitable for

Equinox Systems EQLED66 is a COB LED system that features high power (130W) and a multitude of effects thanks to 4 panels that are adjustable, making it ideal for mobile entertainers. The panels can be controlled independently, which allows for maximum room or stage coverage. Moreover, the system comes with 1120 Lux @ 2m (per par, full on) and a beam angle of 95°.

Equinox Systems EQLED66 is a COB LED system that features high power (130W) and a multitude of effects thanks to 4 panels that are adjustable, making it ideal for mobile entertainers. The panels can be controlled independently, which allows for maximum room or stage coverage. Moreover, the system comes with 1120 Lux @ 2m (per par, full on) and a beam angle of 95°.

Order code: EQLED66
Gigabar MKII COB
System
User Manual
www.prolight.co.uk Gigabar MKII COB System User Manual
2
Safety advice
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CARE-
FULLY BEFORE YOUR INITIAL START-UP!
• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.
• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.
• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary
fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.
• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorised modication to the equipment.
OPERATING DETERMINATIONS
Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand
thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.
Donotendangeryourownsafetyandthesafetyofothers!
Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.
CAUTION!
KEEP THIS EQUIPMENT
AWAY FROM RAIN,
MOISTURE AND LIQUIDS
CAUTION!
TAKE CARE USING
THIS EQUIPMENT!
HIGH VOLTAGE-RISK
OF ELECTRIC SHOCK!!
• Neverletthepowercablecomeintocontactwithother
cables.Handlethepowercableandallmainsvoltage
connectionswithparticularcaution!
• Neverremovewarningorinformativelabelsfromtheunit.
• Donotopentheequipmentanddonotmodifytheunit.
• Donotconnectthisequipmenttoadimmerpack.
• Donotswitchtheequipmentonandoffinshortintervals,
asthiswillreducethesystem’slife.
• Onlyusetheequipmentindoors.
• Donotexposetoammablesources,liquidsorgases.
• Alwaysdisconnectthepowerfromthemainswhen
equipmentisnotinuseorbeforecleaning!Onlyhandle
thepower-cablebytheplug.Neverpullouttheplugby
pullingthepower-cable.
• Makesurethattheavailablemainssupplyvoltageis
between100~240VAC,50/60Hz.
• Makesurethatthepowercableisnevercrimpedor
damaged.Checktheequipmentandthepowercable
periodically.
• Iftheequipmentisdroppedordamaged,disconnectthe
mainspowersupplyimmediatelyandhaveaqualied
engineerinspecttheequipmentbeforeoperatingagain.
• Iftheequipmenthasbeenexposedtodrastic
temperatureuctuation(e.g.aftertransportation),
donotconnectpowerorswitchitonimmediately.
Thearisingcondensationmightdamagetheequipment.
Leavetheequipmentswitchedoffuntilithasreached
roomtemperature.
• Ifyourproductfailstofunctioncorrectly,stopuse
immediately.Packtheunitsecurely(preferablyinthe
originalpackingmaterial),andreturnittoyourProLight
dealerforservice.
• Onlyusefusesofsametypeandrating.
• Repairs,servicingandpowerconnectionmustonlybe
carriedoutbyaqualiedtechnician.THISUNITCONTAINS
NOUSERSERVICEABLEPARTS.
• Thislightingxtureisforprofessionaluseonly-itis
notdesignedfororsuitableforhouseholduse.The
productmustbeinstalledbyaqualiedtechnicianin
accordancewithlocalterritoryregulations.Thesafetyof
theinstallationistheresponsibilityoftheinstaller.The
xturepresentsrisksofsevereinjuryordeathduetore
hazards,electricshockandfalls.
• Warning!RiskGroup2LEDproductaccordingto
EN62471.Donotviewthelightoutputwithoptical
instrumentsoranydevicethatmayconcentratethebeam.
• WARRANTY:Oneyearfromdateofpurchase.
www.prolight.co.uk Gigabar MKII COB System User Manual
3
Product overview & technical specications
Withtheconvenienceandeaseoffastset-upandtake-downthissystemisidealformobileentertainers.
Built-inprogramsareactivatedbytheincludedfootswitchorDMX.Themultidirectionalpanelscreateamultitude
ofeffectsandareindependentlyadjustableformaximumroomorstagecoverageAlsoincludedisastandand
roadbagstoprotectthefullpackagewhilstbeingtransportedorstored.
• 4x30Wtri-colourCOBLEDs(RGB)
• Beamangle:95°
• Beamanglewithsuppliedlens:30°
• 1120Lux@2m(perpar,fullon)
• DMXchannels:1/3/7/12
or16selectable
• Auto,soundactiveandmaster/
slavemodesplusbuilt-inprograms
• 0-100%dimming
andvariablestrobe
• 4pushbuttonmenuwith
LEDdigitaldisplay
• 3-PinXLRinput/output
• 5-Pininputforincluded
footcontroller
• IECpowerinput
• 2xIECpoweroutputs(unswitched)
• Heightadjustablestandincluded
• Carrybagincluded
• Allmetaldesign
• Convectioncooled
Gigabar MKII COB System
Specications Gigabar MKII COB System
Powerconsumption 130W
Powersupply 100~240V,50/60Hz
Fuse F3A250V
Dimensions 235x990x95mm(withoutstand)
Weight 12.5kg
Ordercode EQLED66
30° - Lux
FULL ON
R
G
B
95° - Lux
FULL ON
R
G
B
4480
1190
2540
640
764
208
420
88
1120
298
635
160
191
52
105
22
498
132
282
71
84
23
46
9
280
74
159
40
47
13
26
5
179
47
102
25
30
8
16
3
0m 1m 2m 3m 4m 5m
95°
30°
990mm 95mm
235mm
www.prolight.co.uk Gigabar MKII COB System User Manual
4
01-Earthpoint
02-LEDdisplay
03-Functionbuttons
04-3-PinDMXinput
05-3-PinDMXoutput
06-5-Pinfoot
controllerinput
07-IECpowerinput
08-IECpoweroutputs
09-Fuse:F3A250V
10-35mmstandadaptor
Inthebox:1 x xture & case,
1 x stand, 2 x oor brackets,
1 x foot controller,
1 x power cable &
1 x user manual
Technical specications
www.prolight.co.uk
GIGABAR
MKII COB SYSTEM
MENU DOWN UP ENTER
SLAVE
SOUND
DMX
MASTER
FOOT
CONTROLLER
INPUT
POWER INPUT: 100-240V~50/60Hz
FUSE: F3A 250V
POWER OUTPUT:
100-240V~50/60Hz
POWER OUTPUT:
100-240V~50/60Hz
DMX INPUTDMX OUTPUT
MIC
09 10 06
0205 0304070108 08
www.prolight.co.uk Gigabar MKII COB System User Manual
5
Operating instructions
C h N d
1 C h
3 C h
7 C h
1 2 C h
1 6 C h
Channel modes
A d d r
A 0 0 1
A 5 1 2
DMX address setting
S h N d
S h 0
S h 8
Show mode 0-8
S o U n
o n
o F F
Sound active mode
S e n S
0
1 0 0
Sound sensitivity
t e S t
Auto test
Slave 1
S L N d
S L 1
S L 2
N a S t
Master mode
Slave 2
b L N d
y e s
n o
Blackout
L e d
o n
o F F
LED display on
LED display off
MENU
0
9 9 9 9
h o u r
Fixture hours
u - -u e r
Software version
d S I pd I s p
Display invert
www.prolight.co.uk Gigabar MKII COB System User Manual
6
Operating instructions
DMX mode:
OperatinginaDMXcontrolmodeenvironmentgivestheuserthegreatestexibilitywhenitcomes
tocustomisingorcreatingashow.Inthismodeyouwillbeabletocontroleachindividualtraitofthe
xtureandeachxtureindependently.
ToaccesstheDMXaddressmode,pressthe“MENU”buttonontherearoftheunitandusethe“UP”
and“DOWN”buttonstoshowAddrontheLEDdisplay.Pressthe“ENTER”buttonandusethe“UP”
and“DOWN”buttonstosettherequiredDMXaddress.Pressthe“ENTER”buttontoconrmthesetting.
ToaccesstheDMXchannelmode,pressthe“MENU”buttonontherearoftheunitandusethe“UP”
and“DOWN”buttonstoshowChNdontheLEDdisplay.Pressthe“ENTER”buttonandusethe“UP”
and“DOWN”buttonstochooseoneofthe1/3/7/12or16DMXchannelmodes.Pressthe“ENTER”
buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
1 channel mode:
Channel Value Function
CH1
000-007 Nofunction
008-037 Show1
038-067 Show2
068-097 Show3
098-127 Show4
128-157 Show5
158-187 Show6
188-217 Show7
218-247 Show8
248-255 Shows1-8
3 channel mode:
Channel Value Function
CH1 000-255 Red(0-100%)
CH2 000-255 Green(0-100%)
CH3 000-255 Blue(0-100%)
7 channel mode:
Channel Value Function
CH1 000-255 Red(0-100%)
CH2 000-255 Green(0-100%)
CH3 000-255 Blue(0-100%)
CH4 000-255 Masterdimmer(0-100%)
CH5
000-007 Nofuntion
008-247 Strobe(slow-fast)
248-255 Soundactive&strobe
CH6
000-007 Nofunction
008-247 16colourchange
248-255 Soundactive(shows1-16)
CH7
000-007 Nofunction
008-255
Speed(slow-fast)
(onlywhenCH6isvalues008-247)
www.prolight.co.uk Gigabar MKII COB System User Manual
7
12 channel mode:
Channel Value Function
CH1 000-255 Par1Red(0-100%)
CH2 000-255 Par1Green(0-100%)
CH3 000-255 Par1Blue(0-100%)
CH4 000-255 Par2Red(0-100%)
CH5 000-255 Par2Green(0-100%)
CH6 000-255 Par2Blue(0-100%)
CH7 000-255 Par3Red(0-100%)
CH8 000-255 Par3Green(0-100%)
CH9 000-255 Par3Blue(0-100%)
CH10 000-255 Par4Red(0-100%)
CH11 000-255 Par4Green(0-100%)
CH12 000-255 Par4Blue(0-100%)
16 channel mode:
Channel Value Function
CH1 000-255 Par1Red(0-100%)
CH2 000-255 Par1Green(0-100%)
CH3 000-255 Par1Blue(0-100%)
CH4 000-255 Par2Red(0-100%)
CH5 000-255 Par2Green(0-100%)
CH6 000-225 Par2Blue(0-100%)
CH7 000-255 Par3Red(0-100%)
CH8 000-255 Par3Green(0-100%)
CH9 000-255 Par3Blue(0-100%)
CH10 000-225 Par4Red(0-100%)
CH11 000-255 Par4Green(0-100%)
CH12 000-255 Par4Blue(0-100%)
CH13 000-255 Masterdimmer(0-100%)
CH14
000-007 Nofunction
008-247 Strobe(slow-fast)
248-255 Soundactive&strobe
CH15
000-007 Nofunction
008-247 16colourchange
248-255 Soundactive(shows1-16)
CH16
000-007 Nofunction
008-255
Speed(slow-fast)
(onlywhenCH15isvalues008-247)
Operating instructions
www.prolight.co.uk Gigabar MKII COB System User Manual
8
Master/slave mode:
Tosetthemasterunit,pressthe“MENU”buttononthefrontofthemasterunittoshowSLNd onthe
LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochooseNast.
Pressthe“ENTER”buttontoconrmthesetting.Thenselectyourdesiredprogram(soundactive,DMX
oroneofthebuilt-inprograms).
Tosettheotherunitsinslavemode,pressthe“MENU”buttononthefrontoftheunittoshowSLNd
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose
eitherSL1(Slave1)orSL2(Slave2).Pressthe“ENTER”buttontoconrmthesetting.Theunitwill
nowruninsequencewiththemasterunit.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
PleaseensurethatallslaveunitsaresettothesameDMXchannelmodeasthemasterunit.
Show mode (built-in programs):
Toaccesstheshowmodes,pressthe“MENU”buttononthefrontoftheunittoshowShNd
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoosethe
showyourequirefromSh 0~Sh 8.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Sound active mode:
Toaccessthesoundactivemode,pressthe“MENU”buttononthefrontoftheunittoshowSoUn
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthe
soundmodeonoroff.Pressthe“ENTER”buttontoconrmthesetting.
Toadjustthesoundsensitivity,pressthe“MENU”buttononthefrontoftheunittoshowSens
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthe
soundsensitivity0~100.Pressthe“ENTER”buttontoconrmthesetting.
Value: 0 - 100 (0 = low sensitivity, 100 = high sensitivity)
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Operating instructions
www.prolight.co.uk Gigabar MKII COB System User Manual
9
Operating the foot controller:
ThisfootcontrollerismadespeciallyfortheGigabarMKIICOBsystem.Manyofthebuilt-inprogrammes
canbeaccessedviathe3footswitches.
Strobe mode:
Tosettheunitinstrobemodeviathefootcontroller,pressthe“MODE”buttononthefootcontrollerto
showNAStonthexturesLEDdisplay.Nowpressandholdthe“ENTER”buttononceforwhitestrobe,
againforwhitesoundstobe,andathirdtimeforcoloursoundstrobe.
Colour selection mode:
Tosettheunitincolourselectionmodeviathefootcontroller,pressthe“MODE”buttononthefoot
controllertoshowCoL-onthexturesLEDdisplay.Nowpressthe“ENTER”buttontoselectthe
desiredcolour.
Show mode:
Tosettheunitinshowmodeviathefootcontroller,pressthe“MODE”buttononthefoot
controllertoshowSh -onthexturesLEDdisplay.Nowpressthe“ENTER”buttontoselect
thedesiredshow(shows1-8).
Blackout:
Toactivateblackout,pressthe“BLACKOUT”footswitch.Oncepressed,theunitwillblackout.
Operating instructions
BLACKOUT MODE ENTER
www.prolight.co.uk
GIGABAR
MKII COB SYSTEM
CoL1-Red
CoL2-Green
CoL3-Blue
CoL4-Yellow
CoL5-Magenta
CoL6-Cyan
CoL7-White(RGB)
CoL8-Colourchange
(speedviasound)
www.prolight.co.uk Gigabar MKII COB System User Manual
10
Setting the DMX address:
TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachxturerequiresa“startaddress”
from1-512.Axturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannel
indicatedbythestartaddress.Forexample,axturethatoccupiesoruses7channelsofDMXandwas
addressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105
and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthe
chainstartsat107.
DMX 512:
DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligent
xturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothexture.
DMXdataissentasserialdatathattravelsfromxturetoxtureviatheDATA“IN”andDATA“OUT”
XLRterminalslocatedonallDMXxtures(mostcontrollersonlyhaveadata“out”terminal).
DMX linking:
DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogether
andoperatefromasinglecontroller,aslongasallxturesandthecontrollerareDMXcompliant.
ToensureproperDMXdatatransmission,whenusingseveralDMXxturestrytousetheshortest
cablepathpossible.TheorderinwhichxturesareconnectedinaDMXlinedoesnotinuencethe
DMXaddressing.Forexample;axtureassignedtoaDMXaddressof1maybeplacedanywherein
aDMXline,atthebeginning,attheend,oranywhereinthemiddle.Whenaxtureisassigneda
DMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,
nomatterwhereitislocatedintheDMXchain.
DATA cable (DMX cable) requirements (for DMX operation):
ThisxturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.
YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,
seeimagebelow.
Also remember that DMX cable must be daisy chained and cannot be split.
DMX setup
FurtherDMXcablescanbe
purchasedfromallgoodsound
andlightingsuppliersor
ProLightConceptsdealers.
Pleasequote:
CABL10 – 2m
CABL11 – 5m
CABL12 – 10m
www.prolight.co.uk Gigabar MKII COB System User Manual
11
Notice:
Besuretofollowthediagramsbelowwhenmakingyourowncables.Donotconnectthecables
shieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRs
outercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.
Special note:
Line termination:
Whenlongerrunsofcableareused,
youmayneedtouseaterminatoron
thelastunittoavoiderraticbehaviour.
Using a cable terminator will decrease
the possibilities of erratic behaviour.
(3-pin - Order ref: CABL9O, 5-pin - Order ref: CABL89)
5-pin XLR DMX connectors:
Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRxtures
maybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa
3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.
Terminationreducessignaltransmission
problemsandinterference.Itisalways
advisabletoconnectaDMXterminal,
(resistance120Ohm1/4W)betweenpin2
(DMX-)andpin3(DMX+)ofthelastxture.
5-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
3-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
DMX setup
www.prolight.co.uk Gigabar MKII COB System User Manual
12
WEEE notice
Correct Disposal of this Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries
with separate collection systems)
Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposedof
withotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtothe
environmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromother
typesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.
Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheir
localgovernmentofce,fordetailsofwhereandhowtheycantakethisitemforenvironmentally
saferecycling.
Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthe
purchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12

Equinox Systems EQLED66 User manual

Equinox Systems
Brand
Equinox Systems
Model
EQLED66
Category
Stroboscopes & disco lights
Type
User manual
This manual is also suitable for

Equinox Systems EQLED66 is a COB LED system that features high power (130W) and a multitude of effects thanks to 4 panels that are adjustable, making it ideal for mobile entertainers. The panels can be controlled independently, which allows for maximum room or stage coverage. Moreover, the system comes with 1120 Lux @ 2m (per par, full on) and a beam angle of 95°.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents