Equinox Systems Crossfire EQLED061 User manual

Equinox Systems
Brand
Equinox Systems
Model
Crossfire EQLED061
Category
Stroboscopes & disco lights
Type
User manual

Equinox Systems Crossfire EQLED061 features 8 moving gobos that criss-cross the room, changing color and creating an awesome effect. Its razor sharp red, green, blue, and white beams project over wide areas, making it ideal for mobile DJs, bars, and small entertainment venues. It offers auto, sound active, and master/slave modes, 0-100% dimming, variable strobe, and a 4-button menu with LED display. It's fan-cooled for reliability and has IEC power input/output and 3-Pin XLR input/output for easy integration into your lighting setup.

Equinox Systems Crossfire EQLED061 features 8 moving gobos that criss-cross the room, changing color and creating an awesome effect. Its razor sharp red, green, blue, and white beams project over wide areas, making it ideal for mobile DJs, bars, and small entertainment venues. It offers auto, sound active, and master/slave modes, 0-100% dimming, variable strobe, and a 4-button menu with LED display. It's fan-cooled for reliability and has IEC power input/output and 3-Pin XLR input/output for easy integration into your lighting setup.

Order code: EQLED061
Crossre
User Manual
www.prolight.co.uk Crossre User Manual
2
Safety advice
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL
CAREFULLY BEFORE YOUR INITIAL START-UP!
• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.
• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.
• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary
fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.
• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorised modication to the equipment.
OPERATING DETERMINATIONS
Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand
thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.
Donotendangeryourownsafetyandthesafetyofothers!
Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.
CAUTION!
KEEP THIS EQUIPMENT
AWAY FROM RAIN,
MOISTURE AND LIQUIDS
CAUTION!
TAKE CARE USING
THIS EQUIPMENT!
HIGH VOLTAGE-RISK
OF ELECTRIC SHOCK!!
• Neverletthepowercablecomeintocontactwithother
cables.Handlethepowercableandallmainsvoltage
connectionswithparticularcaution!
• Neverremovewarningorinformativelabelsfromtheunit.
• Donotopentheequipmentanddonotmodifytheunit.
• Donotconnectthisequipmenttoadimmerpack.
• Donotswitchtheequipmentonandoffinshortintervals,
asthiswillreducethesystem’slife.
• Onlyusetheequipmentindoors.
• Donotexposetoammablesources,liquidsorgases.
• Alwaysdisconnectthepowerfromthemainswhen
equipmentisnotinuseorbeforecleaning!Onlyhandle
thepower-cablebytheplug.Neverpullouttheplugby
pullingthepower-cable.
• Makesurethattheavailablemainssupplyvoltageis
between100~240VAC,50/60Hz.
• Makesurethatthepowercableisnevercrimpedor
damaged.Checktheequipmentandthepowercable
periodically.
• Iftheequipmentisdroppedordamaged,disconnectthe
mainspowersupplyimmediatelyandhaveaqualied
engineerinspecttheequipmentbeforeoperatingagain.
• Iftheequipmenthasbeenexposedtodrastic
temperatureuctuation(e.g.aftertransportation),
donotconnectpowerorswitchitonimmediately.
Thearisingcondensationmightdamagetheequipment.
Leavetheequipmentswitchedoffuntilithasreached
roomtemperature.
• Ifyourproductfailstofunctioncorrectly,stopuse
immediately.Packtheunitsecurely(preferablyinthe
originalpackingmaterial),andreturnittoyourProLight
dealerforservice.
• Onlyusefusesofsametypeandrating.
• Repairs,servicingandpowerconnectionmustonlybe
carriedoutbyaqualiedtechnician.THISUNITCONTAINS
NOUSERSERVICEABLEPARTS.
• Thislightingxtureisforprofessionaluseonly-itis
notdesignedfororsuitableforhouseholduse.The
productmustbeinstalledbyaqualiedtechnicianin
accordancewithlocalterritoryregulations.Thesafetyof
theinstallationistheresponsibilityoftheinstaller.The
xturepresentsrisksofsevereinjuryordeathduetore
hazards,electricshockandfalls.
• Warning!RiskGroup2LEDproductaccordingto
EN62471.Donotviewthelightoutputwithoptical
instrumentsoranydevicethatmayconcentratethebeam.
• WARRANTY:Oneyearfromdateofpurchase.
www.prolight.co.uk Crossre User Manual
3
Product overview & technical specications
TheCrossrefeatures8movinggobosthatcriss-crosstheroom,whilstchangingcolour,creatinganawesome
effect.Theserazorsharpred,green,blueandwhitebeamsprojectoverwideareastoenhancelightshowsmaking
themidealformobileDJs,barsandsmallentertainmentvenues.
•8x3WLEDs(R:2,G:2,B:2,W:2)
•DMXchannels:8
•Auto,soundactiveandmaster/slavemodes
•0-100%dimmingandvariablestrobe
•Suppliedwithhangingbracket
•4pushbuttonmenuwithLEDdisplay
•IECpowerinput/output
•3-PinXLRinput/output
•Fancooled
Crossre
Specications Crossre
Powerconsumption 45W
Powersupply 100~240V,50/60Hz
Fuse T1A250V
Dimensions 237x225x217mm
Weight 3kg
Ordercodes EQLED061
237mm
225mm 217mm
01-Hangingbracket
02-Hangingbracket
adjustmentknob
03-LEDdisplay
04-Functionbuttons
05-IECpowerinput
06-IECpoweroutput
07-Fuse:T1A250V
08-3-PinXLRDMXinput
09-3-PinXLRDMXoutput
10-Microphone
11-Safetyeye
CROSSFIRE
01
05
07
01
03
04
0806
11
09
10
02 02
Inthebox:1 x xture,
1 x power cable &
1 x user manual
www.prolight.co.uk Crossre User Manual
4
DMX mode:
ToselecttheDMXaddress,pressthe“MENU”buttonontherearoftheunittoshowA001ontheLED
display.Nowusethe“UP”and“DOWN”buttonstoselecttheDMXaddressbetween001-512.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Operating instructions
8 channel mode:
Channel Value Function
1 000-255 Masterdimmer(0-100%)
2 000-255 Red(0-100%)
3 000-255 Green(0-100%)
4 000-255 Blue(0-100%)
5 000-255 White(0-100%)
6 000-009 Strobeoff
010-255 Strobespeed(fast-slow)
7 000-005 Motorstop
006-127 Motorclockwiserotationspeed(slow-fast)
128-255 Motoranti-clockwiserotationspeed(fast-slow)
8 000-009 Nofunction
010-072 Automode1speed(slow-fast)
073-134 Automode2speed(slow-fast)
135-197 Automode3speed(slow-fast)
198-220 Soundactivemode1
221-225 Soundactivemode2
Automode A1 1~A1 9 Red-Speed
A2 1~A2 9 Green-Speed
A3 1~A3 9 Blue-Speed
A4 1~A4 9 White-Speed
A5 1~A5 9 Automode1-Speed
A6 1~A6 9 Automode2-Speed
A7 1~A7 9 Automode3-Speed
A8 1~A8 9 Automodewithstrobe-Strobespeed
Soundactivemode S1 Soundmode1
S2 Soundmode2
Addresssetting A001~A512
Menusystem
Auto mode:
Toaccesstheautomode,pressthe
“MENU”buttonontherearoftheunitto
showbetweenA1 -andA8 -.
Usethe“UP”and“DOWN”buttonsto
adjustthespeedbetweenA1 1~A1
9.Pressthe“ENTER” buttontoconrm
thesetting.Toexitoutofanyoftheabove
options,pressthe“MENU”button.
Sound active mode:
Toaccessthesoundactivemode,press
the“MENU”buttonontherearoftheunit
toshoweitherS1 -(Soundmode1)or
S2 -(Soundmode2).Pressthe“ENTER”
buttontoconrmthesetting.Toexitoutof
anyoftheaboveoptions,pressthe“MENU”
button.
www.prolight.co.uk Crossre User Manual
5
Setting the DMX address:
TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachxturerequiresa“startaddress”
from1-512.Axturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannel
indicatedbythestartaddress.Forexample,axturethatoccupiesoruses7channelsofDMXandwas
addressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105
and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthe
chainstartsat107.
DMX 512:
DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligent
xturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothexture.
DMXdataissentasserialdatathattravelsfromxturetoxtureviatheDATA“IN”andDATA“OUT”
XLRterminalslocatedonallDMXxtures(mostcontrollersonlyhaveadata“out”terminal).
DMX linking:
DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogether
andoperatefromasinglecontroller,aslongasallxturesandthecontrollerareDMXcompliant.
ToensureproperDMXdatatransmission,whenusingseveralDMXxturestrytousetheshortest
cablepathpossible.TheorderinwhichxturesareconnectedinaDMXlinedoesnotinuencethe
DMXaddressing.Forexample;axtureassignedtoaDMXaddressof1maybeplacedanywherein
aDMXline,atthebeginning,attheend,oranywhereinthemiddle.Whenaxtureisassigneda
DMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,
nomatterwhereitislocatedintheDMXchain.
DATA cable (DMX cable) requirements (for DMX operation):
ThisxturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.
YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,
seeimagebelow.
Also remember that DMX cable must be daisy chained and cannot be split.
DMX setup
FurtherDMXcablescanbe
purchasedfromallgoodsound
andlightingsuppliersor
ProLightConceptsdealers.
Pleasequote:
CABL10 – 2m
CABL11 – 5m
CABL12 – 10m
www.prolight.co.uk Crossre User Manual
6
Notice:
Besuretofollowthediagramsbelowwhenmakingyourowncables.Donotconnectthecables
shieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRs
outercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.
Special note:
Line termination:
Whenlongerrunsofcableareused,
youmayneedtouseaterminatoron
thelastunittoavoiderraticbehaviour.
Using a cable terminator will decrease
the possibilities of erratic behaviour.
(3-pin - Order ref: CABL9O, 5-pin - Order ref: CABL89)
5-pin XLR DMX connectors:
Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRxtures
maybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa
3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.
Terminationreducessignaltransmission
problemsandinterferance.itisalways
advisabletoconnectaDMXterminal,
(resistance120Ohm1/4W)betweenpin2
(DMX-)andpin3(DMX+)ofthelastxture.
5-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
3-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
DMX setup
www.prolight.co.uk Crossre User Manual
7
Operating instructions & WEEE notice
Correct Disposal of this Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries
with separate collection systems)
Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposedof
withotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtothe
environmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromother
typesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.
Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheir
localgovernmentofce,fordetailsofwhereandhowtheycantakethisitemforenvironmentally
saferecycling.
Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthe
purchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.
www.prolight.co.uk Crossre User Manual
8
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Equinox Systems Crossfire EQLED061 User manual

Equinox Systems
Brand
Equinox Systems
Model
Crossfire EQLED061
Category
Stroboscopes & disco lights
Type
User manual

Equinox Systems Crossfire EQLED061 features 8 moving gobos that criss-cross the room, changing color and creating an awesome effect. Its razor sharp red, green, blue, and white beams project over wide areas, making it ideal for mobile DJs, bars, and small entertainment venues. It offers auto, sound active, and master/slave modes, 0-100% dimming, variable strobe, and a 4-button menu with LED display. It's fan-cooled for reliability and has IEC power input/output and 3-Pin XLR input/output for easy integration into your lighting setup.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents