2. Home
  3. Lighting
  4. Stroboscopes & disco lights
  5. EQUINOX
  6. EQLED033

EQUINOX EQLED033, Swing Batten User manual

  • Hello! I am an AI chatbot trained to assist you with the EQUINOX EQLED033 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Order code: EQLED033
Swing Batten
User Manual
www.prolight.co.uk Swing Batten User Manual
2
Safety advice
WARNING
FOR YOUR OWN SAFETY, PLEASE READ THIS USER MANUAL CARE-
FULLY BEFORE YOUR INITIAL START-UP!
• Beforeyourinitialstart-up,pleasemakesurethatthereisnodamagecausedduringtransportation.
• Shouldtherebeanydamage,consultyourdealeranddonotusetheequipment.
• Tomaintaintheequipmentingoodworkingconditionandtoensuresafeoperation,itisnecessary
fortheusertofollowthesafetyinstructionsandwarningnoteswritteninthismanual.
• Pleasenotethatdamagescausedbyusermodicationstothisequipmentarenotsubjecttowarranty.
IMPORTANT:
The manufacturer will not accept liability for any resulting damages caused by the non-observance
of this manual or any unauthorised modication to the equipment.
OPERATING DETERMINATIONS
Ifthisequipmentisoperatedinanyotherway,thanthosedescribedinthismanual,theproductmaysufferdamageand
thewarrantybecomesvoid.Incorrectoperationmayleadtodangere.g:short-circuit,burnsandelectricshocksetc.
Donotendangeryourownsafetyandthesafetyofothers!
Incorrectinstallationorusecancauseseriousdamagetopeopleand/orproperty.
CAUTION!
KEEP THIS EQUIPMENT
AWAY FROM RAIN,
MOISTURE AND LIQUIDS
CAUTION!
TAKE CARE USING
THIS EQUIPMENT!
HIGH VOLTAGE-RISK
OF ELECTRIC SHOCK!!
• Neverletthepowercablecomeintocontactwithother
cables.Handlethepowercableandallmainsvoltage
connectionswithparticularcaution!
• Neverremovewarningorinformativelabelsfromtheunit.
• Donotopentheequipmentanddonotmodifytheunit.
• Donotconnectthisequipmenttoadimmerpack.
• Donotswitchtheequipmentonandoffinshortintervals,
asthiswillreducethesystem’slife.
• Onlyusetheequipmentindoors.
• Donotexposetoammablesources,liquidsorgases.
• Alwaysdisconnectthepowerfromthemainswhen
equipmentisnotinuseorbeforecleaning!Onlyhandle
thepower-cablebytheplug.Neverpullouttheplugby
pullingthepower-cable.
• Makesurethattheavailablemainssupplyvoltageis
between100~240VAC,50/60Hz.
• Makesurethatthepowercableisnevercrimpedor
damaged.Checktheequipmentandthepowercable
periodically.
• Iftheequipmentisdroppedordamaged,disconnectthe
mainspowersupplyimmediatelyandhaveaqualied
engineerinspecttheequipmentbeforeoperatingagain.
• Iftheequipmenthasbeenexposedtodrastic
temperatureuctuation(e.g.aftertransportation),
donotconnectpowerorswitchitonimmediately.
Thearisingcondensationmightdamagetheequipment.
Leavetheequipmentswitchedoffuntilithasreached
roomtemperature.
• Ifyourproductfailstofunctioncorrectly,stopuse
immediately.Packtheunitsecurely(preferablyinthe
originalpackingmaterial),andreturnittoyourProLight
dealerforservice.
• Onlyusefusesofsametypeandrating.
• Repairs,servicingandpowerconnectionmustonlybe
carriedoutbyaqualiedtechnician.THISUNITCONTAINS
NOUSERSERVICEABLEPARTS.
• Thislightingxtureisforprofessionaluseonly-itis
notdesignedfororsuitableforhouseholduse.The
productmustbeinstalledbyaqualiedtechnicianin
accordancewithlocalterritoryregulations.Thesafetyof
theinstallationistheresponsibilityoftheinstaller.The
xturepresentsrisksofsevereinjuryordeathduetore
hazards,electricshockandfalls.
• Warning!RiskGroup2LEDproductaccordingto
EN62471.Donotviewthelightoutputwithoptical
instrumentsoranydevicethatmayconcentratethebeam.
• WARRANTY:Oneyearfromdateofpurchase.
www.prolight.co.uk Swing Batten User Manual
3
Product overview & technical specications
TheSwingBattenisadynamicmulti-beameffectdispensingeightintense,long-throwbeamsgeneratedbythe
10WCREEquad-colourLEDs.Thebattencutsthroughhazewitheaseproducingstunningbeameffects.The4
buttonmenusystemallowscontrolofmaster/slavefunctions,andthexturecanbealsobeoperatedinsound
activeandDMXmodes.
•8x10WCREEquad-colourLEDs(RGBW)
•Beamangle:4°
•16,100Lux@2m(perLED,fullon)
•IndividuallycontrollableLEDs
•Refreshrate:400Hz
•DMXchannels:6/12or16selectable
•Auto,soundactiveandmaster/slavemodes
•Tilt:220°
•0-100%dimmingandvariablestrobe
•Quickreleaseomegaclampsincluded
•4pushbuttonmenuwithLEDdisplay
•PowerCONinput/output
•3-PinXLRinput/output
•Convectioncooled
Swing Batten
Specications
Powerconsumption 100W
Powersupply 100~240V,50/60Hz
Fuse F3A250V
Dimensions 160x1065x80mm
Weight 7.5kg
Ordercode EQLED033
1065mm 80mm
160mm
www.prolight.co.uk Swing Batten User Manual
4
DMX INPUT DMX OUTPUT POWER INPUT:
100-240V~50/60Hz
POWER OUTPUT
ON
FUSE: F3A 250VOFF
www.prolight.co.uk
SWING
BATTEN
MENU UP DOWN ENTER
DMX INPUT DMX OUTPUT POWER INPUT:
100-240V~50/60Hz
POWER OUTPUT
ON
FUSE: F3A 250VOFF
www.prolight.co.uk
SWING
BATTEN
MENU UP DOWN ENTER
Technical specications
01-LCDdisplay
02-Menubutton
03-Upbutton
04-Downbutton
05-Enterbutton
06-3-pinDMXinput
07-3-pinDMXouput
08-PowerCONinput
09-PowerCONinput
10-On/offswitch
11-FuseF3A250V
12-Rubberfeet
13-Vents
14-Omegaclampmounts
15-Safetybondpoint
02
03
04
05
06
13 1314 14 14 1415
07 08 09 10 11
01
Inthebox:1 x xture,
1 x power cable,
1 x user manual &
2 x omega clamps
12 12
www.prolight.co.uk Swing Batten User Manual
5
Operating instructions
A d d r
A 0 0 1
A 5 1 2
C h N d
6 C h
1 6 C h
S h N d
S h 0
S h 8
S o U n
o n
o F F
S e n S
0
1 0 0
DMX address setting
Channel mode
Show mode 0-8
Slave 1
S L N d
S L 1
S L 2
Sound active mode
Sound sensitivity
L e d
o n
o F F
LED display on
LED display off
d s p I
I d s P
Display inversion
y e s
n o
t
I
L t
Tilt inversion
N a S t
Master mode
Slave 2
1 2 C h
r S e t
Reset
u e r
Firmware version
h o u r
Fixture hours
t e S t
Auto test
DMX mode:
OperatinginaDMXcontrolmodeenvironment
givestheuserthegreatestexibilitywhenit
comestocustomisingorcreatingashow.
Inthismodeyouwillbeabletocontrol
eachindividualtraitofthextureand
eachxtureindependently.
ToaccesstheDMXaddressmode,pressthe
“MENU”buttononthefrontoftheunittoshow
AddrontheLEDdisplay.Nowpressthe
“ENTER”buttonandusethe“UP”and“DOWN”
buttonstosettherequiredDMXaddress.
Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,
pressthe“MENU”button.
ToaccesstheDMXchannelmode,pressthe
“MENU”buttononthefrontoftheunittoshow
ChNdontheLEDdisplay.Nowpressthe
“ENTER”buttonandusethe“UP”and“DOWN”
buttonstochooseoneofthe6,12or16DMX
channelmodes.Pressthe“ENTER”buttonto
conrmthesetting.
Toexitoutofanyoftheaboveoptions,
pressthe“MENU”button.
www.prolight.co.uk Swing Batten User Manual
6
Operating instructions
6 channel mode:
Channel Value Function
CH1 000-255 Masterdimmer(0-100%)
CH2
000-007 Nofunction
008-255 Strobe(slow-fast)
CH3
000-007 Nofunction
008-049 Show1
050-091 Show2
092-133 Show3
134-175 Show4
176-217 Show5
218-247 Show6
248-255 Soundactive
CH4 000-255 Showmodespeed(slow-fast)
CH5
000-005 Nofunction
006-009 R
010-013 G
014-017 B
018-021 W
022-025 RG
026-029 RB
030-033 RW
034-037 GB
038-041 GW
042-045 BW
046-049 RGB
050-053 RGW
054-057 RBW
058-061 GBW
062-063 RGBW
064-079 Colourchase1
080-095 Colourchase2
096-111 Colourchase3
112-127 Colourchase4
128-143 Colourchase5
144-159 Colourchase6
160-175 Colourchase7
176-191 Colourchase8
192-207 Colourchase9
208-223 Colourchase10
224-239 Colourchase11
240-255 Colourchase12
CH6 000-255 Colourchasespeed(slow-fast)
12 channel mode:
Channel Value Function
CH1 000-255 Tilt(0°-270°)
CH2 000-255 Tiltmovementspeed
CH3 000-255 Masterdimmer(0-100%)
CH4
000-007 Nofunction
008-255 Strobe(slow-fast)
CH5
000-008 Nofunction
009-024 LED1-R
025-041 LED1-G
042-057 LED1-B
058-074 LED1-W
075-090 LED1-RG
091-107 LED1-RB
108-123 LED1-RW
124-140 LED1-GB
141-156 LED1-GW
157-173 LED1-BW
174-189 LED1-RGB
190-206 LED1-RGW
207-222 LED1-RBW
223-239 LED1-GBW
240-255 LED1-RGBW
CH6 - LED2(usevaluesfromCH5)
CH7 - LED3(usevaluesfromCH5)
CH8 - LED4(usevaluesfromCH5)
CH9 - LED5(usevaluesfromCH5)
CH10 - LED6(usevaluesfromCH5)
CH11 - LED7(usevaluesfromCH5)
CH12 - LED8(usevaluesfromCH5)
www.prolight.co.uk Swing Batten User Manual
7
Operating instructions
16 channel mode:
Channel Value Function
CH1 000-255 Tilt(0°-270°)
CH2 000-255 Tiltmovementspeed
CH3 000-255 Masterdimmer(0-100%)
CH4
000-007 Nofunction
008-255 Strobe(slow-fast)
CH5
000-008 Nofunction
009-024 LED1-R
025-041 LED1-G
042-057 LED1-B
058-074 LED1-W
075-090 LED1-RG
091-107 LED1-RB
108-123 LED1-RW
124-140 LED1-GB
141-156 LED1-GW
157-173 LED1-BW
174-189 LED1-RGB
190-206 LED1-RGW
207-222 LED1-RBW
223-239 LED1-GBW
240-255 LED1-RGBW
CH6 - LED2(usevaluesfromCH5)
CH7 - LED3(usevaluesfromCH5)
CH8 - LED4(usevaluesfromCH5)
CH9 - LED5(usevaluesfromCH5)
CH10 - LED6(usevaluesfromCH5)
CH11 - LED7(usevaluesfromCH5)
CH12 - LED8(usevaluesfromCH5)
CH13
000-007 Nofunction
008-049 Show1
050-091 Show2
092-133 Show3
134-175 Show4
176-217 Show5
218-247 Show6
248-255 Soundactive
CH14 000-255 Showmodespeed(slow-fast)
CH15
000-005 Nofunction
006-009 R
010-013 G
014-017 B
018-021 W
022-025 RG
026-029 RB
030-033 RW
034-037 GB
038-041 GW
042-045 BW
046-049 RGB
050-053 RGW
054-057 RBW
058-061 GBW
062-063 RGBW
064-079 Colourchase1
080-095 Colourchase2
096-111 Colourchase3
112-127 Colourchase4
128-143 Colourchase5
144-159 Colourchase6
160-175 Colourchase7
176-191 Colourchase8
192-207 Colourchase9
208-223 Colourchase10
224-239 Colourchase11
240-255 Colourchase12
CH16 000-255 Colourchasespeed(slow-fast)
www.prolight.co.uk Swing Batten User Manual
8
Operating instructions
Master/slave mode:
Tosetthemasterunit,pressthe“MENU”buttononthefrontofthemasterunittoshowSLNd onthe
LEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochooseNast.
Pressthe“ENTER”buttontoconrmthesetting.Thenselectyourdesiredprogram(soundactive,DMX
oroneofthebuilt-inprograms).
Tosettheotherunitsinslavemode,pressthe“MENU”buttononthefrontoftheunittoshowSLNd
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoose
eitherSL1(Slave1)orSL2(Slave2).Pressthe“ENTER”buttontoconrmthesetting.Theunitwill
nowruninsequencewiththemasterunit.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
PleaseensurethatallslaveunitsaresettothesameDMXchannelmodeasthemasterunit.
Show mode (built-in programs):
Toaccesstheshowmodes,pressthe“MENU”buttononthefrontoftheunittoshowShNd
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstochoosethe
showyourequirefromSh 0~Sh 8.Pressthe“ENTER”buttontoconrmthesetting.
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
Sound active mode:
Toaccessthesoundactivemode,pressthe“MENU”buttononthefrontoftheunittoshowSoUn
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthe
soundmodeonoroff.Pressthe“ENTER”buttontoconrmthesetting.
Toadjustthesoundsensitivity,pressthe“MENU”buttononthefrontoftheunittoshowSens
ontheLEDdisplay.Nowpressthe“ENTER”buttonandusethe“UP”and“DOWN”buttonstosetthe
soundsensitivity0~100.Pressthe“ENTER”buttontoconrmthesetting.
Value: 0 - 100 (0 = low sensitivity, 100 = high sensitivity)
Toexitoutofanyoftheaboveoptions,pressthe“MENU”button.
www.prolight.co.uk Swing Batten User Manual
9
Setting the DMX address:
TheDMXmodeenablestheuseofauniversalDMXcontroller.Eachxturerequiresa“startaddress”
from1-512.Axturerequiringoneormorechannelsforcontrolbeginstoreadthedataonthechannel
indicatedbythestartaddress.Forexample,axturethatoccupiesoruses7channelsofDMXandwas
addressedtostartonDMXchannel100,wouldreaddatafromchannels:100,101,102,103,104,105
and106.Chooseastartaddresssothatthechannelsuseddonotoverlap.E.g.thenextunitinthe
chainstartsat107.
DMX 512:
DMX(DigitalMultiplex)isauniversalprotocolusedasaformofcommunicationbetweenintelligent
xturesandcontrollers.ADMXcontrollersendsDMXdatainstructionsformthecontrollertothexture.
DMXdataissentasserialdatathattravelsfromxturetoxtureviatheDATA“IN”andDATA“OUT”
XLRterminalslocatedonallDMXxtures(mostcontrollersonlyhaveadata“out”terminal).
DMX linking:
DMXisalanguageallowingallmakesandmodelsofdifferentmanufacturestobelinkedtogether
andoperatefromasinglecontroller,aslongasallxturesandthecontrollerareDMXcompliant.
ToensureproperDMXdatatransmission,whenusingseveralDMXxturestrytousetheshortest
cablepathpossible.TheorderinwhichxturesareconnectedinaDMXlinedoesnotinuencethe
DMXaddressing.Forexample;axtureassignedtoaDMXaddressof1maybeplacedanywherein
aDMXline,atthebeginning,attheend,oranywhereinthemiddle.Whenaxtureisassigneda
DMXaddressof1,theDMXcontrollerknowstosendDATAassignedtoaddress1tothatunit,
nomatterwhereitislocatedintheDMXchain.
DATA cable (DMX cable) requirements (for DMX operation):
ThisxturecanbecontrolledviaDMX-512protocol.TheDMXaddressissetonthebackoftheunit.
YourunitandyourDMXcontrollerrequireastandard3-pinXLRconnectorfordatainput/output,
seeimagebelow.
Also remember that DMX cable must be daisy chained and cannot be split.
FurtherDMXcablescanbe
purchasedfromallgoodsound
andlightingsuppliersor
ProLightConceptsdealers.
Pleasequote:
CABL10 – 2m
CABL11 – 5m
CABL12 – 10m
DMX setup
www.prolight.co.uk Swing Batten User Manual
10
Notice:
Besuretofollowthediagramsbelowwhenmakingyourowncables.Donotconnectthecables
shieldconductortothegroundlugorallowtheshieldconductortocomeincontactwiththeXLRs
outercasing.Groundingtheshieldcouldcauseashortcircuitanderraticbehaviour.
Special note:
Line termination:
Whenlongerrunsofcableareused,
youmayneedtouseaterminatoron
thelastunittoavoiderraticbehaviour.
Using a cable terminator will decrease
the possibilities of erratic behaviour.
(3-pin - Order ref: CABL9O, 5-pin - Order ref: CABL89)
5-pin XLR DMX connectors:
Somemanufacturesuse5-pinXLRconnectorsfordatatransmissioninplaceof3-pin.5-pinXLRxtures
maybeimplementedina3-pinXLRDMXline.Wheninsertingstandard5-pinXLRconnectorsintoa
3-pinlineacableadaptormustbeused.Thediagrambelowdetailsthecorrectcableconversion.
Terminationreducessignaltransmission
problemsandinterference.itisalways
advisabletoconnectaDMXterminal,
(resistance120Ohm1/4W)betweenpin2
(DMX-)andpin3(DMX+)ofthelastxture.
5-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
3-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
3-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
5-pin XLR (socket)
Pin 1: GND (screen)
Pin 2: Signal (-)
Pin 3: Signal (+)
Pin 4: N/C
Pin 5: N/C
DMX setup
www.prolight.co.uk Swing Batten User Manual
11
WEEE notice
Correct Disposal of this Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries
with separate collection systems)
Thismarkingshownontheproductoritsliterature,indicatesthatitshouldnotbedisposedof
withotherhouseholdwastesattheendofitsworkinglife.Topreventpossibleharmtothe
environmentorhumanhealthfromuncontrolledwastedisposal,pleaseseparatethisfromother
typesofwastesandrecycleitresponsiblytopromotethesustainablereuseofmaterialresources.
Householdusersshouldcontacteithertheretailerwheretheypurchasedthisproduct,ortheir
localgovernmentofce,fordetailsofwhereandhowtheycantakethisitemforenvironmentally
saferecycling.
Businessusersshouldcontacttheirsupplierandcheckthetermsandconditionsofthe
purchasecontract.Thisproductshouldnotbemixedwithothercommercialwastesfordisposal.
www.prolight.co.uk Swing Batten User Manual
12
/